There are a variety of code styles used by the various linker scripts
around the code-base. This change brings them in line with one another
and attempts to make the scripts more friendly for skim-readers.
Change-Id: Ibee2afad0d543129c9ba5a8a22e3ec17d77e36ea
Signed-off-by: Chris Kay <chris.kay@arm.com>
At the moment we save and restore the HCRX_EL2 register in assembly, and
just depend on the build time flags.
To allow runtime checking, and to avoid too much code in assembly, move
that over to C, and use the new combined build/runtime feature check.
This also allows to drop the assert, since this should now be covered by
the different FEAT_STATE_x options.
Change-Id: I3e20b9ba17121d423cd08edc20bbf4e7ae7c0178
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Use the generic check function in feat_detect.c, and split the feature
check into two functions, as done for FEAT_FGT before.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I0a4f973427c10d5d15c414ff5e12b18b7e645fae
Following macros removed
- handle_async_ea : It duplicates "check_and_unmask_ea" functionality
- check_if_serror_from_EL3: This macro is small and called only once,
replace this macro with instructions at the caller.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Id7eec6263ec23cc8792139f491c563f616fd3618
When a platform decides to use FEAT_RNG_TRAP, every RNDR or RNDRSS read
will trap into EL3. The platform can then emulate those instructions, by
either executing the real CPU instructions, potentially conditioning the
results, or use rate-limiting or filtering to protect the hardware
entropy pool. Another possiblitiy would be to use some platform specific
TRNG device to get entropy and returning this.
To demonstrate platform specific usage, add a demo implementation for the
FVP: It will execute the actual CPU instruction and just return the
result. This should serve as reference code to implement platform specific
policies.
We change the definition of read_rndr() and read_rndrrs() to use the
alternative sysreg encoding, so that all assemblers can handle that.
Add documentation about the new platform specific RNG handler function.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ibce817b3b06ad20129d15531b81402e3cc3e9a9e
At the moment we only handle SMC traps from lower ELs, but ignore any
other synchronous traps and just panic.
To cope with system register traps, which we might need to emulate,
introduce a C function to handle those traps, and wire that up in the
exception handler to be called.
We provide a dispatcher function (in C), that will call platform
specific implementation for certain (classes of) system registers.
For now this is empty.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: If147bcb49472eb02791498700300926afbcf75ff
scr_el3 registers cannot be modified in lower ELs which means it retains
the same value which is stored in the EL3 cpu context structure for the
given world. So, we should not save the register when entering to EL3
from lower EL as we have the copy of it present in cpu context.
During EL3 execution SCR_EL3 value can be modifed for following cases
1. Changes which is required for EL3 execution, this change is temp
and do not need to be saved.
2. Changes which affects lower EL execution, these changes need to be
written to cpu context as well and will be retrieved when scr_el3
is restored as part of exiting EL3
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I9cc984ddf50e27d09e361bd83b1b3c9f068cf2fd
SMCCCv1.3 introduces the SVE hint bit added to the SMC FID (bit 16)
denoting that the world issuing an SMC doesn't expect the callee to
preserve the SVE state (FFR, predicates, Zn vector bits greater than
127). Update the generic SMC handler to copy the SVE hint bit state
to SMC flags and mask out the bit by default for the services called
by the standard dispatcher. It is permitted by the SMCCC standard to
ignore the bit as long as the SVE state is preserved. In any case a
callee must preserve the NEON state (FPCR/FPSR, Vn 128b vectors)
whichever the SVE hint bit state.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2b163ed83dc311b8f81f96b23c942829ae9fa1b5
Following hardening done around ESR_EL3 register usage
- Panic if exception is anyting other than SError
- AET bit is only valid if DFSC is 0x11, move DFSC check before AET.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib15159920f6cad964332fd40f88943aee2bc73b4
Added remediation driver for DRTM to set/get the error
from non-volatile memory
Change-Id: I8f0873dcef4936693e0f39a3c95096cb689c04b7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Added Event Log driver support for DRTM. This driver
is responsible for the doing the hash measurement of
various DRTM components as per [1], and putting these
measurements in the Event Log buffer.
[1]: https://developer.arm.com/documentation/den0113/a, section 3.16
Change-Id: I9892c313cf6640b82e261738116fe00f7975ee12
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added platform hooks to retrieve DRTM features and
address map.
Additionally, implemented these hooks for the FVP platform.
Signed-off-by: John Powell <john.powell@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I5621cc9807ffff8139ae8876250147f7b2c76759
Updated DRTM setup functionality that mainly does below 2 things
1. Initialise the DRTM DMA protection, this function assumes the
platform must support complete DMA protection.
2. Initialise the Crypto module that will be useful to calculate
the hash of various DRTM element involved.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Change-Id: I3d6e4d534686d391fa7626094d2b2535dac74e00
Updated mbedTLS driver to include mbedTLS functions necessary for a
DRTM supported build.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: If0120374a971519cf84f93e0c59e1a320a72cd97
Added a dummy DRTM setup function and also, introduced DRTM SMCs
handling as per DRTM spec [1]. Few basic SMCs are handled in this
change such as ARM_DRTM_SVC_VERSION and ARM_DRTM_SVC_FEATURES
that returns DRTM version and functions ids supported respectively,
and others are dummy for now.
[1]: https://developer.arm.com/documentation/den0113/latest
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Change-Id: I8c7afe920c78e064cbab2298f59e6837c70ba8ff
Currently, when SPMC at S-EL2 is used, we cannot use the RAS framework
to handle Group 0 interrupts. This is required on platforms where first
level of triaging needs to occur at EL3, before forwarding RAS handling
to a secure partition running atop an SPMC (hafnium).
The RAS framework depends on EHF and EHF registers for Group 0
interrupts to be trapped to EL3 when execution is both in secure world
and normal world. However, an FF-A compliant SPMC requires secure
interrupts to be trapped by the SPMC when execution is in S-EL0/S-EL1.
Consequently, the SPMC (hafnium) is incompatible with EHF, since it is
not re-entrant, and a Group 0 interrupt trapped to EL3 when execution is
in secure world, cannot be forwarded to an SP running atop SPMC.
This patch changes EHF to only register for Group 0 interrupts to be
trapped to EL3 when execution is in normal world and also makes it a
valid routing model to do so, when EL3_EXCEPTION_HANDLING is set (when
enabling the RAS framework).
Signed-off-by: Raghu Krishnamurthy <raghu.ncstate@gmail.com>
Change-Id: I72d4cf4d8ecc549a832d1c36055fbe95866747fe
Some linker sections are discarded since 511046eaa2 ("BL31: discard
.dynsym .dynstr .hash sections to make ENABLE_PIE work"). However, that
logic was placed inside a preprocessor condition, so it only applied to
the !SEPARATE_NOBITS_REGION case. Move the /DISCARD/ block down so it
applies in all cases.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I6604609f2321a2a9c32a25721a697c320108a974
The purpose of including vendor extend plat.ld.rodata.inc
linker script is for compactly collecting vendor rodata in
intrinsic rodata section.
If vendors define a standalone section and assign the section
placed after __RW_END__, the raw bindry(bl31.bin) will include
bss section with zero value and increase binary size.
Signed-off-by: Leon Chen <leon.chen@mediatek.com>
Change-Id: I46dd8b02bfb26af1dcca27f61b3ea29ca74bbbd6
During a synchronous exception, the 'enter_lower_el_sync_ea' handler
tests the ESR_EL3 EA bit and calls 'report_unhandled_exception', if
it is not set.
EA = 0 and IFSC = SEA, seems to be a contradiction. EA provides further
classification of a synchronous abort. A synchronous abort is determined
by the IFSC value on an instruction fetch synchronous abort. As a result,
EA will never be set to 1 on an instruction fetch synchronous abort and
'report_unhandled_exception' should not be called.
This patch removes this behavior to allow the platform to handle the
exception.
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I3f004447ad4316d81649063e1ffb3ac644c83ede
This patch enables access to the branch record buffer control registers
in non-secure EL2 and EL1 using the new build option ENABLE_BRBE_FOR_NS.
It is disabled for all secure world, and cannot be used with ENABLE_RME.
This option is disabled by default, however, the FVP platform makefile
enables it for FVP builds.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I576a49d446a8a73286ea6417c16bd0b8de71fca0
It is not always the case that RESET_TO_BL31 enabled platforms don't
execute a bootloader before BL31.
For those use cases, being able to receive arguments from that first
loader (i.e: a DTB with TPM logs) might be necessary feature.
This code has been validated on iMX8mm.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Change-Id: Ibf00c3867cb1d1012b8b376e64ccaeca1c9d2bff
Introduce build flag for enabling the secure partition
manager core, SPMC_AT_EL3. When enabled, the SPMC module
will be included into the BL31 image. By default the
flag is disabled.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I5ea1b953e5880a07ffc91c4dea876a375850cf2a
As part of the RFC:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/13651,
this patch adds the 'cm_prepare_el3_exit_ns' function. The function is
a wrapper to 'cm_prepare_el3_exit' function for Non-secure state.
When EL2 sysregs context exists (CTX_INCLUDE_EL2_REGS is
enabled) EL1 and EL2 sysreg values are restored from the context
instead of directly updating the registers.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I9b071030576bb05500d54090e2a03b3f125d1653
In preparation for adding the EL3 SPMC configuration as defined in
the FF-A specification, restructure the existing SPM_MM code.
With this restructuring of the code, the 'spm_mm' directory is
renamed as 'spm' and the code inside has been split into two
sub-directories named 'common' and 'spm_mm'. The code in 'spm_mm'
directory contains the code that implements the MM interface.
In subsequent patches, the 'spmc' directory will be introduced
under the 'spm' directory providing the code that implements
the 'FF-A' interface.
Currently the common functionality for S-EL1 partitions is
limited to assembler functions to enter and exit an SP
synchronously.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I37739b9b53bc68e151ab5c1c0c6a15b3ee362241
This patch adds architectural features detection procedure to ensure
features enabled are present in the given hardware implementation.
It verifies whether the architecture build flags passed during
compilation match the respective features by reading their ID
registers. It reads through all the enabled feature specific ID
registers at once and panics in case of mismatch(feature enabled
but not implemented in PE).
Feature flags are used at sections (context_management,
save and restore routines of registers) during context switch.
If the enabled feature flag is not supported by the PE, it causes an
exception while saving or restoring the registers guarded by them.
With this mechanism, the build flags are validated at an early
phase prior to their usage, thereby preventing any undefined action
under their control.
This implementation is based on tristate approach for each feature and
currently FEAT_STATE=0 and FEAT_STATE=1 are covered as part of this
patch. FEAT_STATE=2 is planned for phase-2 implementation and will be
taken care separately.
The patch has been explicitly tested, by adding a new test_config
with build config enabling majority of the features and detected
all of them under FVP launched with parameters enabling v8.7 features.
Note: This is an experimental procedure and the mechanism itself is
guarded by a macro "FEATURE_DETECTION", which is currently being
disabled by default.
The "FEATURE_DETECTION" macro is documented and the platforms are
encouraged to make use of this diagnostic tool by enabling this
"FEATURE_DETECTION" flag explicitly and get used to its behaviour
during booting before the procedure gets mandated.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ia23d95430fe82d417a938b672bfb5edc401b0f43
During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.
This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.
Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
In the next patch we add an extra step of setting the PSTATE
registers to a known state on el3 entry. In this patch we create
the function prepare_el3_entry to wrap the steps needed for before
el3 entry. For now this is only save_gp_pmcr_pauth_regs.
Change-Id: Ie26dc8d89bfaec308769165d2649e84d41be196c
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.
The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73
MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 and Cortex-A510 cores.
MPMM allows the SoC firmware to detect and limit high activity events
to assist in SoC processor power domain dynamic power budgeting and
limit the triggering of whole-rail (i.e. clock chopping) responses to
overcurrent conditions.
This feature is enabled via the `ENABLE_MPMM` build option.
Configuration can be done via FCONF by enabling `ENABLE_MPMM_FCONF`, or
by via the plaform-implemented `plat_mpmm_topology` function.
Change-Id: I77da82808ad4744ece8263f0bf215c5a091c3167
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces the `amu.mk` Makefile, used to remove the need
to manually include AMU sources into the various build images.
Makefiles requiring the list of AMU sources are expected to include
this file and use `${AMU_SOURCES}` to retrieve them.
Change-Id: I3d174033ecdce6439a110d776f0c064c67abcfe0
Signed-off-by: Chris Kay <chris.kay@arm.com>
This patch updates and refactors the GPT library and fixes bugs.
- Support all combinations of PGS, PPS, and L0GPTSZ parameters.
- PPS and PGS are set at runtime, L0GPTSZ is read from GPCCR_EL3.
- Use compiler definitions to simplify code.
- Renaming functions to better suit intended uses.
- MMU enabled before GPT APIs called.
- Add comments to make function usage more clear in GPT library.
- Added _rme suffix to file names to differentiate better from the
GPT file system code.
- Renamed gpt_defs.h to gpt_rme_private.h to better separate private
and public code.
- Renamed gpt_core.c to gpt_rme.c to better conform to TF-A precedent.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I4cbb23b0f81e697baa9fb23ba458aa3f7d1ed919
This patch introduces the Granule Protection Table (GPT)
library code. This implementation will be updated later to
be more flexible, as the current implementation is very rigid.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I3af824a28c6e9a5d36459c0c51d2d9bebfba1505
The changes include:
- A new build option (ENABLE_RME) to enable FEAT_RME
- New image called RMM. RMM is R-EL2 firmware that manages Realms.
When building TF-A, a path to RMM image can be specified using
the "RMM" build flag. If RMM image is not provided, TRP is built
by default and used as RMM image.
- Support for RMM image in fiptool
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I017c23ef02e465a5198baafd665a60858ecd1b25
This patch adds a new context for realm world and realm world
awareness in context management.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: Ic17469393603e789d7adc025880346bc3d6233d7
This patch introduces the RMM dispatcher into BL31. This
will be the mechanism that will enable communication to
take place between the Realm and non-secure world. Currently
gives the capability for granules to be
transitioned from non-secure type to realm and vice versa.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I1fdc99a4bdd42bc14911aa0c6954b131de309511
FEAT_RME introduces two additional security states,
Root and Realm security states. This patch adds Realm
security state awareness to SMCCC helpers and entry point info
structure.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I9cdefcc1aa71259b2de46e5fb62b28d658fa59bd
FEAT_HCX adds the extended hypervisor configuration register (HCRX_EL2)
and access to this register must be explicitly enabled through the
SCR_EL3.HXEn bit. This patch adds a new build flag ENABLE_FEAT_HCX to
allow the register to be accessed from EL2.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ibb36ad90622f1dc857adab4b0d4d7a89456a522b
Introduced a build flag 'ENABLE_TRF_FOR_NS' to enable trace filter
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: If3f53b8173a5573424b9a405a4bd8c206ffdeb8c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced a build flag 'ENABLE_SYS_REG_TRACE_FOR_NS' to enable trace
system registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: Idc1acede4186e101758cbf7bed5af7b634d7d18d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced a build flag 'ENABLE_TRBE_FOR_NS' to enable trace buffer
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: I285a672ccd395eebd377714c992bb21062a729cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Add SMC wrappers for handshaking the existence
and basic parameter validation for the SMCCC/PCI
API. The actual read/write/segment validation is
implemented by a given platform which will enable
the API by defining SMC_PCI_SUPPORT.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: I4485ad0fe6003cec6f5eedef688914d100513c21
This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and includes an entropy pool implementation to
avoid dropping any entropy requested from the platform.
Change-Id: I71cadb3cb377a507652eca9e0d68714c973026e9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For SoCs which do not implement RAS, use DSB as a barrier to
synchronize pending external aborts at the entry and exit of
exception handlers. This is needed to isolate the SErrors to
appropriate context.
However, this introduces an unintended side effect as discussed
in the https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3440
A summary of the side effect and a quick workaround is provided as
part of this patch and summarized here:
The explicit DSB at the entry of various exception vectors in BL31
for handling exceptions from lower ELs can inadvertently trigger an
SError exception in EL3 due to pending asyncrhonouus aborts in lower
ELs. This will end up being handled by serror_sp_elx in EL3 which will
ultimately panic and die.
The way to workaround is to update a flag to indicate if the exception
truly came from EL3. This flag is allocated in the cpu_context
structure. This is not a bullet proof solution to the problem at hand
because we assume the instructions following "isb" that help to update
the flag (lines 100-102 & 139-141) execute without causing further
exceptions.
Change-Id: I4d345b07d746a727459435ddd6abb37fda24a9bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.
If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.
This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e
Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:
bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
0x3c0U" (32 bits) is less that the right hand operand
"18446744073709547519ULL" (64 bits).
This also resolves MISRA defects such as:
bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
In the expression "3U << 20", shifting more than 7 bits, the number
of bits in the essential type of the left expression, "3U", is
not allowed.
Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.
This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,
92407e73 and x19, x19, #0xffffffff
from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.
The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.
Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
This patch allows the system to fallback to a default CPU library
in case the MPID does not match with any of the supported ones.
This feature can be enabled by setting SUPPORT_UNKNOWN_MPID build
option to 1 (enabled by default only on arm_fpga platform).
This feature can be very dangerous on a production image and
therefore it MUST be disabled for Release images.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I0df7ef2b012d7d60a4fd5de44dea1fbbb46881ba
Loop macros make it easier for developers to include new variables to
assert or define and also help code code readability on makefiles.
Change-Id: I0d21d6e67b3eca8976c4d856ac8ccc02c8bb5ffa
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>
As per latest mailing communication [1], we decided to
update AT speculative workaround implementation in order to
disable page table walk for lower ELs(EL1 or EL0) immediately
after context switching to EL3 from lower ELs.
Previous implementation of AT speculative workaround is available
here: 45aecff00
AT speculative workaround is updated as below:
1. Avoid saving and restoring of SCTLR and TCR registers for EL1
in context save and restore routine respectively.
2. On EL3 entry, save SCTLR and TCR registers for EL1.
3. On EL3 entry, update EL1 system registers to disable stage 1
page table walk for lower ELs (EL1 and EL0) and enable EL1
MMU.
4. On EL3 exit, restore SCTLR and TCR registers for EL1 which
are saved in step 2.
[1]:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-July/000586.html
Change-Id: Iee8de16f81dc970a8f492726f2ddd57e7bd9ffb5
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
The .rela.dyn section is the same for BL2-AT-EL3, BL31, TSP.
Move it to the common header file.
I slightly changed the definition so that we can do "RELA_SECTION >RAM".
It still produced equivalent elf images.
Please note I got rid of '.' from the VMA field. Otherwise, if the end
of previous .data section is not 8-byte aligned, it fails to link.
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
aarch64-linux-gnu-ld.bfd: warning: changing start of section .rela.dyn by 4 bytes
make: *** [Makefile:1071: build/qemu/release/bl31/bl31.elf] Error 1
Change-Id: Iba7422d99c0374d4d9e97e6fd47bae129dba5cc9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Move the data section to the common header.
I slightly tweaked some scripts as follows:
[1] bl1.ld.S has ALIGN(16). I added DATA_ALIGN macro, which is 1
by default, but overridden by bl1.ld.S. Currently, ALIGN(16)
of the .data section is redundant because commit 4128659076
("Fix boot failures on some builds linked with ld.lld.") padded
out the previous section to work around the issue of LLD version
<= 10.0. This will be fixed in the future release of LLVM, so
I am keeping the proper way to align LMA.
[2] bl1.ld.S and bl2_el3.ld.S define __DATA_RAM_{START,END}__ instead
of __DATA_{START,END}__. I put them out of the .data section.
[3] SORT_BY_ALIGNMENT() is missing tsp.ld.S, sp_min.ld.S, and
mediatek/mt6795/bl31.ld.S. This commit adds SORT_BY_ALIGNMENT()
for all images, so the symbol order in those three will change,
but I do not think it is a big deal.
Change-Id: I215bb23c319f045cd88e6f4e8ee2518c67f03692
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Chris Kay
Andre Przywara
Manish Pandey
Olivier Deprez
Manish V Badarkhe
johpow01
Raghu Krishnamurthy
Samuel Holland
Leon Chen
Varun Wadekar
Jorge Ramirez-Ortiz
Marc Bonnici
Zelalem Aweke
Jayanth Dodderi Chidanand
Daniel Boulby
Jeremy Linton
Jimmy Brisson
Madhukar Pappireddy
Javier Almansa Sobrino
Leonardo Sandoval
Masahiro Yamada