You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
196 lines
4.5 KiB
196 lines
4.5 KiB
/*
|
|
* Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include <errno.h>
|
|
|
|
#include <drivers/cfi/v2m_flash.h>
|
|
#include <lib/mmio.h>
|
|
|
|
/*
|
|
* This file supplies a low level interface to the vexpress NOR flash
|
|
* memory of juno and fvp. This memory is organized as an interleaved
|
|
* memory of two chips with a 16 bit word. It means that every 32 bit
|
|
* access is going to access to two different chips. This is very
|
|
* important when we send commands or read status of the chips.
|
|
*/
|
|
|
|
/*
|
|
* DWS ready poll retries. The number of retries in this driver have been
|
|
* obtained empirically from Juno. FVP implements a zero wait state NOR flash
|
|
* model
|
|
*/
|
|
#define DWS_WORD_PROGRAM_RETRIES 1000
|
|
#define DWS_WORD_ERASE_RETRIES 3000000
|
|
#define DWS_WORD_LOCK_RETRIES 1000
|
|
|
|
/* Helper macro to detect end of command */
|
|
#define NOR_CMD_END (NOR_DWS | (NOR_DWS << 16l))
|
|
|
|
/* Helper macros to access two flash banks in parallel */
|
|
#define NOR_2X16(d) ((d << 16) | (d & 0xffff))
|
|
|
|
static unsigned int nor_status(uintptr_t base_addr)
|
|
{
|
|
unsigned long status;
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_READ_STATUS_REG);
|
|
status = mmio_read_32(base_addr);
|
|
status |= status >> 16; /* merge status from both flash banks */
|
|
|
|
return status & 0xFFFF;
|
|
}
|
|
|
|
/*
|
|
* Poll Write State Machine.
|
|
* Return values:
|
|
* 0 = WSM ready
|
|
* -EBUSY = WSM busy after the number of retries
|
|
*/
|
|
static int nor_poll_dws(uintptr_t base_addr, unsigned long int retries)
|
|
{
|
|
unsigned long status;
|
|
|
|
do {
|
|
nor_send_cmd(base_addr, NOR_CMD_READ_STATUS_REG);
|
|
status = mmio_read_32(base_addr);
|
|
if ((status & NOR_CMD_END) == NOR_CMD_END)
|
|
return 0;
|
|
} while (retries-- > 0);
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Return values:
|
|
* 0 = success
|
|
* -EPERM = Device protected or Block locked
|
|
* -EIO = General I/O error
|
|
*/
|
|
static int nor_full_status_check(uintptr_t base_addr)
|
|
{
|
|
unsigned long status;
|
|
|
|
/* Full status check */
|
|
status = nor_status(base_addr);
|
|
|
|
if (status & (NOR_PS | NOR_BLS | NOR_ESS | NOR_PSS))
|
|
return -EPERM;
|
|
if (status & (NOR_VPPS | NOR_ES))
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
void nor_send_cmd(uintptr_t base_addr, unsigned long cmd)
|
|
{
|
|
mmio_write_32(base_addr, NOR_2X16(cmd));
|
|
}
|
|
|
|
/*
|
|
* This function programs a word in the flash. Be aware that it only
|
|
* can reset bits that were previously set. It cannot set bits that
|
|
* were previously reset. The resulting bits = old_bits & new bits.
|
|
* Return values:
|
|
* 0 = success
|
|
* otherwise it returns a negative value
|
|
*/
|
|
int nor_word_program(uintptr_t base_addr, unsigned long data)
|
|
{
|
|
uint32_t status;
|
|
int ret;
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_CLEAR_STATUS_REG);
|
|
|
|
/* Set the device in write word mode */
|
|
nor_send_cmd(base_addr, NOR_CMD_WORD_PROGRAM);
|
|
mmio_write_32(base_addr, data);
|
|
|
|
ret = nor_poll_dws(base_addr, DWS_WORD_PROGRAM_RETRIES);
|
|
if (ret == 0) {
|
|
/* Full status check */
|
|
nor_send_cmd(base_addr, NOR_CMD_READ_STATUS_REG);
|
|
status = mmio_read_32(base_addr);
|
|
|
|
if (status & (NOR_PS | NOR_BLS)) {
|
|
nor_send_cmd(base_addr, NOR_CMD_CLEAR_STATUS_REG);
|
|
ret = -EPERM;
|
|
}
|
|
}
|
|
|
|
if (ret == 0)
|
|
ret = nor_full_status_check(base_addr);
|
|
nor_send_cmd(base_addr, NOR_CMD_READ_ARRAY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Erase a full 256K block
|
|
* Return values:
|
|
* 0 = success
|
|
* otherwise it returns a negative value
|
|
*/
|
|
int nor_erase(uintptr_t base_addr)
|
|
{
|
|
int ret;
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_CLEAR_STATUS_REG);
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_BLOCK_ERASE);
|
|
nor_send_cmd(base_addr, NOR_CMD_BLOCK_ERASE_ACK);
|
|
|
|
ret = nor_poll_dws(base_addr, DWS_WORD_ERASE_RETRIES);
|
|
if (ret == 0)
|
|
ret = nor_full_status_check(base_addr);
|
|
nor_send_cmd(base_addr, NOR_CMD_READ_ARRAY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Lock a full 256 block
|
|
* Return values:
|
|
* 0 = success
|
|
* otherwise it returns a negative value
|
|
*/
|
|
int nor_lock(uintptr_t base_addr)
|
|
{
|
|
int ret;
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_CLEAR_STATUS_REG);
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_LOCK_UNLOCK);
|
|
nor_send_cmd(base_addr, NOR_LOCK_BLOCK);
|
|
|
|
ret = nor_poll_dws(base_addr, DWS_WORD_LOCK_RETRIES);
|
|
if (ret == 0)
|
|
ret = nor_full_status_check(base_addr);
|
|
nor_send_cmd(base_addr, NOR_CMD_READ_ARRAY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* unlock a full 256 block
|
|
* Return values:
|
|
* 0 = success
|
|
* otherwise it returns a negative value
|
|
*/
|
|
int nor_unlock(uintptr_t base_addr)
|
|
{
|
|
int ret;
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_CLEAR_STATUS_REG);
|
|
|
|
nor_send_cmd(base_addr, NOR_CMD_LOCK_UNLOCK);
|
|
nor_send_cmd(base_addr, NOR_UNLOCK_BLOCK);
|
|
|
|
ret = nor_poll_dws(base_addr, DWS_WORD_LOCK_RETRIES);
|
|
if (ret == 0)
|
|
ret = nor_full_status_check(base_addr);
|
|
nor_send_cmd(base_addr, NOR_CMD_READ_ARRAY);
|
|
|
|
return ret;
|
|
}
|
|
|