You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
176 lines
5.0 KiB
176 lines
5.0 KiB
/*
|
|
* Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include <platform_def.h>
|
|
|
|
#include <arch.h>
|
|
#include <asm_macros.S>
|
|
#include <common/bl_common.h>
|
|
#include <drivers/st/stm32_gpio.h>
|
|
|
|
#define GPIO_TX_SHIFT (DEBUG_UART_TX_GPIO_PORT << 1)
|
|
#define GPIO_TX_ALT_SHIFT ((DEBUG_UART_TX_GPIO_PORT - GPIO_ALT_LOWER_LIMIT) << 2)
|
|
|
|
.globl platform_mem_init
|
|
.globl plat_report_exception
|
|
.globl plat_get_my_entrypoint
|
|
.globl plat_secondary_cold_boot_setup
|
|
.globl plat_reset_handler
|
|
.globl plat_is_my_cpu_primary
|
|
.globl plat_my_core_pos
|
|
.globl plat_crash_console_init
|
|
.globl plat_crash_console_flush
|
|
.globl plat_crash_console_putc
|
|
.globl plat_panic_handler
|
|
|
|
func platform_mem_init
|
|
/* Nothing to do, don't need to init SYSRAM */
|
|
bx lr
|
|
endfunc platform_mem_init
|
|
|
|
func plat_report_exception
|
|
bx lr
|
|
endfunc plat_report_exception
|
|
|
|
func plat_reset_handler
|
|
bx lr
|
|
endfunc plat_reset_handler
|
|
|
|
/* ------------------------------------------------------------------
|
|
* unsigned long plat_get_my_entrypoint (void);
|
|
*
|
|
* Main job of this routine is to distinguish between a cold and warm
|
|
* boot.
|
|
*
|
|
* Currently supports only cold boot
|
|
* ------------------------------------------------------------------
|
|
*/
|
|
func plat_get_my_entrypoint
|
|
mov r0, #0
|
|
bx lr
|
|
endfunc plat_get_my_entrypoint
|
|
|
|
/* ---------------------------------------------
|
|
* void plat_secondary_cold_boot_setup (void);
|
|
*
|
|
* Cold-booting secondary CPUs is not supported.
|
|
* ---------------------------------------------
|
|
*/
|
|
func plat_secondary_cold_boot_setup
|
|
b .
|
|
endfunc plat_secondary_cold_boot_setup
|
|
|
|
/* -----------------------------------------------------
|
|
* unsigned int plat_is_my_cpu_primary (void);
|
|
*
|
|
* Find out whether the current cpu is the primary cpu.
|
|
* -----------------------------------------------------
|
|
*/
|
|
func plat_is_my_cpu_primary
|
|
ldcopr r0, MPIDR
|
|
ldr r1, =(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
|
|
and r0, r1
|
|
cmp r0, #STM32MP_PRIMARY_CPU
|
|
moveq r0, #1
|
|
movne r0, #0
|
|
bx lr
|
|
endfunc plat_is_my_cpu_primary
|
|
|
|
/* -------------------------------------------
|
|
* int plat_stm32mp1_get_core_pos(int mpidr);
|
|
*
|
|
* Return CorePos = (ClusterId * 4) + CoreId
|
|
* -------------------------------------------
|
|
*/
|
|
func plat_stm32mp1_get_core_pos
|
|
and r1, r0, #MPIDR_CPU_MASK
|
|
and r0, r0, #MPIDR_CLUSTER_MASK
|
|
add r0, r1, r0, LSR #6
|
|
bx lr
|
|
endfunc plat_stm32mp1_get_core_pos
|
|
|
|
/* ------------------------------------
|
|
* unsigned int plat_my_core_pos(void)
|
|
* ------------------------------------
|
|
*/
|
|
func plat_my_core_pos
|
|
ldcopr r0, MPIDR
|
|
b plat_stm32mp1_get_core_pos
|
|
endfunc plat_my_core_pos
|
|
|
|
/* ---------------------------------------------
|
|
* int plat_crash_console_init(void)
|
|
*
|
|
* Initialize the crash console without a C Runtime stack.
|
|
* ---------------------------------------------
|
|
*/
|
|
func plat_crash_console_init
|
|
/* Enable GPIOs for UART TX */
|
|
ldr r1, =(RCC_BASE + DEBUG_UART_TX_GPIO_BANK_CLK_REG)
|
|
ldr r2, [r1]
|
|
/* Configure GPIO */
|
|
orr r2, r2, #DEBUG_UART_TX_GPIO_BANK_CLK_EN
|
|
str r2, [r1]
|
|
ldr r1, =DEBUG_UART_TX_GPIO_BANK_ADDRESS
|
|
/* Set GPIO mode alternate */
|
|
ldr r2, [r1, #GPIO_MODE_OFFSET]
|
|
bic r2, r2, #(GPIO_MODE_MASK << GPIO_TX_SHIFT)
|
|
orr r2, r2, #(GPIO_MODE_ALTERNATE << GPIO_TX_SHIFT)
|
|
str r2, [r1, #GPIO_MODE_OFFSET]
|
|
/* Set GPIO speed low */
|
|
ldr r2, [r1, #GPIO_SPEED_OFFSET]
|
|
bic r2, r2, #(GPIO_SPEED_MASK << GPIO_TX_SHIFT)
|
|
str r2, [r1, #GPIO_SPEED_OFFSET]
|
|
/* Set no-pull */
|
|
ldr r2, [r1, #GPIO_PUPD_OFFSET]
|
|
bic r2, r2, #(GPIO_PULL_MASK << GPIO_TX_SHIFT)
|
|
str r2, [r1, #GPIO_PUPD_OFFSET]
|
|
/* Set alternate */
|
|
ldr r2, [r1, #GPIO_AFRH_OFFSET]
|
|
bic r2, r2, #(GPIO_ALTERNATE_MASK << GPIO_TX_ALT_SHIFT)
|
|
orr r2, r2, #(DEBUG_UART_TX_GPIO_ALTERNATE << GPIO_TX_ALT_SHIFT)
|
|
str r2, [r1, #GPIO_AFRH_OFFSET]
|
|
/* Enable UART clock, with its source */
|
|
ldr r1, =(RCC_BASE + DEBUG_UART_TX_CLKSRC_REG)
|
|
mov r2, #DEBUG_UART_TX_CLKSRC
|
|
str r2, [r1]
|
|
ldr r1, =(RCC_BASE + DEBUG_UART_TX_EN_REG)
|
|
ldr r2, [r1]
|
|
orr r2, r2, #DEBUG_UART_TX_EN
|
|
str r2, [r1]
|
|
|
|
ldr r0, =STM32MP_DEBUG_USART_BASE
|
|
ldr r1, =STM32MP_DEBUG_USART_CLK_FRQ
|
|
ldr r2, =STM32MP_UART_BAUDRATE
|
|
b console_stm32_core_init
|
|
endfunc plat_crash_console_init
|
|
|
|
/* ---------------------------------------------
|
|
* int plat_crash_console_flush(void)
|
|
*
|
|
* Flush the crash console without a C Runtime stack.
|
|
* ---------------------------------------------
|
|
*/
|
|
func plat_crash_console_flush
|
|
ldr r1, =STM32MP_DEBUG_USART_BASE
|
|
b console_stm32_core_flush
|
|
endfunc plat_crash_console_flush
|
|
|
|
/* ---------------------------------------------
|
|
* int plat_crash_console_putc(int c)
|
|
*
|
|
* Print a character on the crash console without a C Runtime stack.
|
|
* Clobber list : r1 - r3
|
|
*
|
|
* In case of bootloading through uart, we keep console crash as this.
|
|
* Characters could be sent to the programmer, but will be ignored.
|
|
* No specific code in that case.
|
|
* ---------------------------------------------
|
|
*/
|
|
func plat_crash_console_putc
|
|
ldr r1, =STM32MP_DEBUG_USART_BASE
|
|
b console_stm32_core_putc
|
|
endfunc plat_crash_console_putc
|
|
|