arm-trusted-firmware

History

Lionel Debieve b114abb609 Add raw NAND framework The raw NAND framework supports SLC NAND devices. It introduces a new high level interface (io_mtd) that defines operations a driver can register to the NAND framework. This interface will fill in the io_mtd device specification: - device_size - erase_size that could be used by the io_storage interface. NAND core source file integrates the standard read loop that performs NAND device read operations using a skip bad block strategy. A platform buffer must be defined in case of unaligned data. This buffer must fit to the maximum device page size defined by PLATFORM_MTD_MAX_PAGE_SIZE. The raw_nand.c source file embeds the specific NAND operations to read data. The read command is a raw page read without any ECC correction. This can be overridden by a low level driver. No generic support for write or erase command or software ECC correction. NAND ONFI detection is available and can be enabled using NAND_ONFI_DETECT=1. For non-ONFI NAND management, platform can define required information. Change-Id: Id80e9864456cf47f02b74938cf25d99261da8e82 Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Christophe Kerello <christophe.kerello@st.com>		5 years ago
..
io_block.c	io: change seek offset to signed long long	5 years ago
io_dummy.c	Sanitise includes across codebase	6 years ago
io_fip.c	io: change seek offset to signed long long	5 years ago
io_memmap.c	io: change seek offset to signed long long	5 years ago
io_mtd.c	Add raw NAND framework	5 years ago
io_semihosting.c	io: change seek offset to signed long long	5 years ago
io_storage.c	io: change seek offset to signed long long	5 years ago