You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
115 lines
5.4 KiB
115 lines
5.4 KiB
Building FIP images with support for Trusted Board Boot
|
|
=======================================================
|
|
|
|
Trusted Board Boot primarily consists of the following two features:
|
|
|
|
- Image Authentication, described in :ref:`Trusted Board Boot`, and
|
|
- Firmware Update, described in :ref:`Firmware Update (FWU)`
|
|
|
|
The following steps should be followed to build FIP and (optionally) FWU_FIP
|
|
images with support for these features:
|
|
|
|
#. Fulfill the dependencies of the ``mbedtls`` cryptographic and image parser
|
|
modules by checking out a recent version of the `mbed TLS Repository`_. It
|
|
is important to use a version that is compatible with TF-A and fixes any
|
|
known security vulnerabilities. See `mbed TLS Security Center`_ for more
|
|
information. See the :ref:`Prerequisites` document for the appropriate
|
|
version of mbed TLS to use.
|
|
|
|
The ``drivers/auth/mbedtls/mbedtls_*.mk`` files contain the list of mbed TLS
|
|
source files the modules depend upon.
|
|
``include/drivers/auth/mbedtls/mbedtls_config.h`` contains the configuration
|
|
options required to build the mbed TLS sources.
|
|
|
|
Note that the mbed TLS library is licensed under the Apache version 2.0
|
|
license. Using mbed TLS source code will affect the licensing of TF-A
|
|
binaries that are built using this library.
|
|
|
|
#. To build the FIP image, ensure the following command line variables are set
|
|
while invoking ``make`` to build TF-A:
|
|
|
|
- ``MBEDTLS_DIR=<path of the directory containing mbed TLS sources>``
|
|
- ``TRUSTED_BOARD_BOOT=1``
|
|
- ``GENERATE_COT=1``
|
|
|
|
By default, this will use the Chain of Trust described in the TBBR-client
|
|
document. To select a different one, use the ``COT`` build option.
|
|
|
|
In the case of Arm platforms, the location of the ROTPK hash must also be
|
|
specified at build time. The following locations are currently supported (see
|
|
``ARM_ROTPK_LOCATION`` build option):
|
|
|
|
- ``ARM_ROTPK_LOCATION=regs``: the ROTPK hash is obtained from the Trusted
|
|
root-key storage registers present in the platform. On Juno, these
|
|
registers are read-only. On FVP Base and Cortex models, the registers
|
|
are also read-only, but the value can be specified using the command line
|
|
option ``bp.trusted_key_storage.public_key`` when launching the model.
|
|
On Juno board, the default value corresponds to an ECDSA-SECP256R1 public
|
|
key hash, whose private part is not currently available.
|
|
|
|
- ``ARM_ROTPK_LOCATION=devel_rsa``: use the default hash located in
|
|
``plat/arm/board/common/rotpk/arm_rotpk_rsa_sha256.bin``. Enforce
|
|
generation of the new hash if ``ROT_KEY`` is specified.
|
|
|
|
- ``ARM_ROTPK_LOCATION=devel_ecdsa``: use the default hash located in
|
|
``plat/arm/board/common/rotpk/arm_rotpk_ecdsa_sha256.bin``. Enforce
|
|
generation of the new hash if ``ROT_KEY`` is specified.
|
|
|
|
Example of command line using RSA development keys:
|
|
|
|
.. code:: shell
|
|
|
|
MBEDTLS_DIR=<path of the directory containing mbed TLS sources> \
|
|
make PLAT=<platform> TRUSTED_BOARD_BOOT=1 GENERATE_COT=1 \
|
|
ARM_ROTPK_LOCATION=devel_rsa \
|
|
ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_rsa.pem \
|
|
BL33=<path-to>/<bl33_image> \
|
|
all fip
|
|
|
|
The result of this build will be the bl1.bin and the fip.bin binaries. This
|
|
FIP will include the certificates corresponding to the selected Chain of
|
|
Trust. These certificates can also be found in the output build directory.
|
|
|
|
#. The optional FWU_FIP contains any additional images to be loaded from
|
|
Non-Volatile storage during the :ref:`Firmware Update (FWU)` process. To build the
|
|
FWU_FIP, any FWU images required by the platform must be specified on the
|
|
command line. On Arm development platforms like Juno, these are:
|
|
|
|
- NS_BL2U. The AP non-secure Firmware Updater image.
|
|
- SCP_BL2U. The SCP Firmware Update Configuration image.
|
|
|
|
Example of Juno command line for generating both ``fwu`` and ``fwu_fip``
|
|
targets using RSA development:
|
|
|
|
::
|
|
|
|
MBEDTLS_DIR=<path of the directory containing mbed TLS sources> \
|
|
make PLAT=juno TRUSTED_BOARD_BOOT=1 GENERATE_COT=1 \
|
|
ARM_ROTPK_LOCATION=devel_rsa \
|
|
ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_rsa.pem \
|
|
BL33=<path-to>/<bl33_image> \
|
|
SCP_BL2=<path-to>/<scp_bl2_image> \
|
|
SCP_BL2U=<path-to>/<scp_bl2u_image> \
|
|
NS_BL2U=<path-to>/<ns_bl2u_image> \
|
|
all fip fwu_fip
|
|
|
|
.. note::
|
|
The BL2U image will be built by default and added to the FWU_FIP.
|
|
The user may override this by adding ``BL2U=<path-to>/<bl2u_image>``
|
|
to the command line above.
|
|
|
|
.. note::
|
|
Building and installing the non-secure and SCP FWU images (NS_BL1U,
|
|
NS_BL2U and SCP_BL2U) is outside the scope of this document.
|
|
|
|
The result of this build will be bl1.bin, fip.bin and fwu_fip.bin binaries.
|
|
Both the FIP and FWU_FIP will include the certificates corresponding to the
|
|
selected Chain of Trust. These certificates can also be found in the output
|
|
build directory.
|
|
|
|
--------------
|
|
|
|
*Copyright (c) 2019-2020, Arm Limited. All rights reserved.*
|
|
|
|
.. _mbed TLS Repository: https://github.com/ARMmbed/mbedtls.git
|
|
.. _mbed TLS Security Center: https://tls.mbed.org/security
|
|
|