You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
155 lines
4.3 KiB
155 lines
4.3 KiB
HiKey
|
|
=====
|
|
|
|
HiKey is one of 96boards. Hisilicon Kirin6220 processor is installed on HiKey.
|
|
|
|
More information are listed in `link`_.
|
|
|
|
How to build
|
|
------------
|
|
|
|
Code Locations
|
|
~~~~~~~~~~~~~~
|
|
|
|
- Trusted Firmware-A:
|
|
`link <https://github.com/ARM-software/arm-trusted-firmware>`__
|
|
|
|
- OP-TEE
|
|
`link <https://github.com/OP-TEE/optee_os>`__
|
|
|
|
- edk2:
|
|
`link <https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5>`__
|
|
|
|
- OpenPlatformPkg:
|
|
`link <https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4>`__
|
|
|
|
- l-loader:
|
|
`link <https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2>`__
|
|
|
|
- atf-fastboot:
|
|
`link <https://github.com/96boards-hikey/atf-fastboot/tree/master>`__
|
|
|
|
Build Procedure
|
|
~~~~~~~~~~~~~~~
|
|
|
|
- Fetch all the above repositories into local host.
|
|
Make all the repositories in the same ${BUILD\_PATH}.
|
|
|
|
.. code:: shell
|
|
|
|
git clone https://github.com/ARM-software/arm-trusted-firmware -b integration
|
|
git clone https://github.com/OP-TEE/optee_os
|
|
git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5
|
|
git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
|
|
git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
|
|
git clone https://github.com/96boards-hikey/atf-fastboot
|
|
|
|
- Create the symbol link to OpenPlatformPkg in edk2.
|
|
|
|
.. code:: shell
|
|
|
|
$cd ${BUILD_PATH}/edk2
|
|
$ln -sf ../OpenPlatformPkg
|
|
|
|
- Prepare AARCH64 && AARCH32 toolchain. Prepare python.
|
|
|
|
- If your hikey hardware is built by CircuitCo, update *OpenPlatformPkg/Platforms/Hisilicon/HiKey/HiKey.dsc* first. *(optional)*
|
|
console on hikey.**
|
|
|
|
.. code:: shell
|
|
|
|
DEFINE SERIAL_BASE=0xF8015000
|
|
|
|
If your hikey hardware is built by LeMaker, nothing to do.
|
|
|
|
- Build it as debug mode. Create your own build script file or you could refer to **build\_uefi.sh** in l-loader git repository.
|
|
|
|
.. code:: shell
|
|
|
|
cd {BUILD_PATH}/arm-trusted-firmware
|
|
sh ../l-loader/build_uefi.sh hikey
|
|
|
|
- Generate l-loader.bin and partition table for aosp. The eMMC capacity is either 8GB or 4GB. Just change "aosp-8g" to "linux-8g" for debian.
|
|
|
|
.. code:: shell
|
|
|
|
cd ${BUILD_PATH}/l-loader
|
|
ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin
|
|
ln -sf ${EDK2_OUTPUT_DIR}/FV/bl2.bin
|
|
ln -sf ${BUILD_PATH}/atf-fastboot/build/hikey/${FASTBOOT_BUILD_OPTION}/bl1.bin fastboot.bin
|
|
make hikey PTABLE_LST=aosp-8g
|
|
|
|
Setup Console
|
|
-------------
|
|
|
|
- Install ser2net. Use telnet as the console since UEFI fails to display Boot Manager GUI in minicom. **If you don't need Boot Manager GUI, just ignore this section.**
|
|
|
|
.. code:: shell
|
|
|
|
$sudo apt-get install ser2net
|
|
|
|
- Configure ser2net.
|
|
|
|
.. code:: shell
|
|
|
|
$sudo vi /etc/ser2net.conf
|
|
|
|
Append one line for serial-over-USB in below.
|
|
*#ser2net.conf*
|
|
|
|
.. code:: shell
|
|
|
|
2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
|
|
|
|
- Start ser2net
|
|
|
|
.. code:: shell
|
|
|
|
$sudo killall ser2net
|
|
$sudo ser2net -u
|
|
|
|
- Open the console.
|
|
|
|
.. code:: shell
|
|
|
|
$telnet localhost 2004
|
|
|
|
And you could open the console remotely, too.
|
|
|
|
Flash images in recovery mode
|
|
-----------------------------
|
|
|
|
- Make sure Pin3-Pin4 on J15 are connected for recovery mode. Then power on HiKey.
|
|
|
|
- Remove the modemmanager package. This package may cause the idt tool failure.
|
|
|
|
.. code:: shell
|
|
|
|
$sudo apt-get purge modemmanager
|
|
|
|
- Run the command to download recovery.bin into HiKey.
|
|
|
|
.. code:: shell
|
|
|
|
$sudo python hisi-idt.py -d /dev/ttyUSB1 --img1 recovery.bin
|
|
|
|
- Update images. All aosp or debian images could be fetched from `link <http://releases.linaro.org/96boards/>`__.
|
|
|
|
.. code:: shell
|
|
|
|
$sudo fastboot flash ptable prm_ptable.img
|
|
$sudo fastboot flash loader l-loader.bin
|
|
$sudo fastboot flash fastboot fip.bin
|
|
$sudo fastboot flash boot boot.img
|
|
$sudo fastboot flash cache cache.img
|
|
$sudo fastboot flash system system.img
|
|
$sudo fastboot flash userdata userdata.img
|
|
|
|
Boot UEFI in normal mode
|
|
------------------------
|
|
|
|
- Make sure Pin3-Pin4 on J15 are open for normal boot mode. Then power on HiKey.
|
|
|
|
- Reference `link <https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md>`__
|
|
|
|
.. _link: https://www.96boards.org/documentation/consumer/hikey/
|
|
|