arm-trusted-firmware

History

Yann Gautier e5b267bba1 feat(mmc): manage SD Switch Function for high speed mode On SD-cards, Switch Function Command (CMD6) is used to switch functions, like setting High Speed mode. It is useful for high capacity cards to double frequency (from 25MHz by default to 50MHz). If the SD-card is High Capacity, a CMD6 is issued after filling the device information. If High Speed mode is supported and the switch is OK, then the max_bus_freq can be set to 50MHz. The driver set_ios() function should then be called to update peripheral configuration, especially clock prescaler. Change-Id: I2d6807aa7f9440d2b2f907a747cd3b47a2ba1545 Signed-off-by: Yann Gautier <yann.gautier@st.com>		5 years ago
..
allwinner	feat(allwinner): allow to skip PMIC regulator setup	3 years ago
amlogic	meson: Use generic console_t data structure	5 years ago
arm	fix(gic600): implement workaround to forward highest priority interrupt	2 years ago
auth	Merge "feat(auth): enable MBEDTLS_CHECK_RETURN_WARNING" into integration	2 years ago
brcm	Merge "driver: brcm: add USB driver" into integration	4 years ago
cadence	cadence: Change logic in uart driver	4 years ago
cfi	Standardise header guards across codebase	6 years ago
coreboot	coreboot: Use generic base address	5 years ago
fwu	feat(fwu): add a function to pass metadata structure to platforms	3 years ago
io	feat(io_mtd): offset management for FIP usage	3 years ago
marvell	fix(plat/marvell/a3720/uart): do external reset during initialization	3 years ago
measured_boot	fix(measured-boot): add SP entries to event_log_metadata	2 years ago
mentor	Standardise header guards across codebase	6 years ago
nxp	refactor(nxp): use DPG0 mask from Arm GICv3 header	2 years ago
partition	feat(guid-partition): allow to find partition by type UUID	2 years ago
rambus	drivers/rambus: add TRNG-IP-76 driver	4 years ago
renesas/rcar/console	rcar: Use generic console_t data structure	5 years ago
rpi3	rpi3: gpio: Simplify GPIO setup	5 years ago
st	feat(st-pmic): add pmic_voltages_init() function	3 years ago
synopsys	drivers: synopsys: Fix synopsys MMC driver	6 years ago
ti/uart	16550: Use generic console_t data structure	5 years ago
clk.h	feat(clk): add a minimal clock framework	3 years ago
console.h	Don't return error information from console_flush	4 years ago
console_assertions.h	Sanitise includes across codebase	6 years ago
delay_timer.h	delay: correct timeout_init_us()	5 years ago
dw_ufs.h	Standardise header guards across codebase	6 years ago
generic_delay_timer.h	Standardise header guards across codebase	6 years ago
gpio.h	refactor(plat/rockchip/rk3399/drivers/gpio): reduce code duplication	3 years ago
mmc.h	feat(mmc): manage SD Switch Function for high speed mode	2 years ago
nand.h	feat(nand): count bad blocks before a given offset	3 years ago
raw_nand.h	nand: raw_nand: fix timeout issue in nand_wait_ready	4 years ago
scmi-msg.h	drivers: move scmi-msg out of st	4 years ago
scmi.h	drivers: move scmi-msg out of st	4 years ago
spi_mem.h	Add SPI-MEM framework	5 years ago
spi_nand.h	Add SPI-NAND framework	5 years ago
spi_nor.h	Add SPI-NOR framework	5 years ago
ufs.h	fix(ufs): add retries to ufs_read_capacity	2 years ago
usb_device.h	fix(drivers/usb): add a optional ops get_other_speed_config_desc	3 years ago