You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
507 lines
12 KiB
507 lines
12 KiB
/*
|
|
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#ifndef DRAM_SPEC_TIMING_H
|
|
#define DRAM_SPEC_TIMING_H
|
|
|
|
#include <stdint.h>
|
|
|
|
enum ddr3_speed_rate {
|
|
/* 5-5-5 */
|
|
DDR3_800D = 0,
|
|
/* 6-6-6 */
|
|
DDR3_800E = 1,
|
|
/* 6-6-6 */
|
|
DDR3_1066E = 2,
|
|
/* 7-7-7 */
|
|
DDR3_1066F = 3,
|
|
/* 8-8-8 */
|
|
DDR3_1066G = 4,
|
|
/* 7-7-7 */
|
|
DDR3_1333F = 5,
|
|
/* 8-8-8 */
|
|
DDR3_1333G = 6,
|
|
/* 9-9-9 */
|
|
DDR3_1333H = 7,
|
|
/* 10-10-10 */
|
|
DDR3_1333J = 8,
|
|
/* 8-8-8 */
|
|
DDR3_1600G = 9,
|
|
/* 9-9-9 */
|
|
DDR3_1600H = 10,
|
|
/* 10-10-10 */
|
|
DDR3_1600J = 11,
|
|
/* 11-11-11 */
|
|
DDR3_1600K = 12,
|
|
/* 10-10-10 */
|
|
DDR3_1866J = 13,
|
|
/* 11-11-11 */
|
|
DDR3_1866K = 14,
|
|
/* 12-12-12 */
|
|
DDR3_1866L = 15,
|
|
/* 13-13-13 */
|
|
DDR3_1866M = 16,
|
|
/* 11-11-11 */
|
|
DDR3_2133K = 17,
|
|
/* 12-12-12 */
|
|
DDR3_2133L = 18,
|
|
/* 13-13-13 */
|
|
DDR3_2133M = 19,
|
|
/* 14-14-14 */
|
|
DDR3_2133N = 20,
|
|
DDR3_DEFAULT = 21,
|
|
};
|
|
|
|
#define max(a, b) (((a) > (b)) ? (a) : (b))
|
|
#define range(mi, val, ma) (((ma) > (val)) ? (max(mi, val)) : (ma))
|
|
|
|
struct dram_timing_t {
|
|
/* unit MHz */
|
|
uint32_t mhz;
|
|
/* some timing unit is us */
|
|
uint32_t tinit1;
|
|
uint32_t tinit2;
|
|
uint32_t tinit3;
|
|
uint32_t tinit4;
|
|
uint32_t tinit5;
|
|
/* reset low, DDR3:200us */
|
|
uint32_t trstl;
|
|
/* reset high to CKE high, DDR3:500us */
|
|
uint32_t trsth;
|
|
uint32_t trefi;
|
|
/* base */
|
|
uint32_t trcd;
|
|
/* trp per bank */
|
|
uint32_t trppb;
|
|
/* trp all bank */
|
|
uint32_t trp;
|
|
uint32_t twr;
|
|
uint32_t tdal;
|
|
uint32_t trtp;
|
|
uint32_t trc;
|
|
uint32_t trrd;
|
|
uint32_t tccd;
|
|
uint32_t twtr;
|
|
uint32_t trtw;
|
|
uint32_t tras_max;
|
|
uint32_t tras_min;
|
|
uint32_t tfaw;
|
|
uint32_t trfc;
|
|
uint32_t tdqsck;
|
|
uint32_t tdqsck_max;
|
|
/* pd or sr */
|
|
uint32_t txsr;
|
|
uint32_t txsnr;
|
|
uint32_t txp;
|
|
uint32_t txpdll;
|
|
uint32_t tdllk;
|
|
uint32_t tcke;
|
|
uint32_t tckesr;
|
|
uint32_t tcksre;
|
|
uint32_t tcksrx;
|
|
uint32_t tdpd;
|
|
/* mode regiter timing */
|
|
uint32_t tmod;
|
|
uint32_t tmrd;
|
|
uint32_t tmrr;
|
|
uint32_t tmrri;
|
|
/* ODT */
|
|
uint32_t todton;
|
|
/* ZQ */
|
|
uint32_t tzqinit;
|
|
uint32_t tzqcs;
|
|
uint32_t tzqoper;
|
|
uint32_t tzqreset;
|
|
/* Write Leveling */
|
|
uint32_t twlmrd;
|
|
uint32_t twlo;
|
|
uint32_t twldqsen;
|
|
/* CA Training */
|
|
uint32_t tcackel;
|
|
uint32_t tcaent;
|
|
uint32_t tcamrd;
|
|
uint32_t tcackeh;
|
|
uint32_t tcaext;
|
|
uint32_t tadr;
|
|
uint32_t tmrz;
|
|
uint32_t tcacd;
|
|
/* mode register */
|
|
uint32_t mr[4];
|
|
uint32_t mr11;
|
|
/* lpddr4 spec */
|
|
uint32_t mr12;
|
|
uint32_t mr13;
|
|
uint32_t mr14;
|
|
uint32_t mr16;
|
|
uint32_t mr17;
|
|
uint32_t mr20;
|
|
uint32_t mr22;
|
|
uint32_t tccdmw;
|
|
uint32_t tppd;
|
|
uint32_t tescke;
|
|
uint32_t tsr;
|
|
uint32_t tcmdcke;
|
|
uint32_t tcscke;
|
|
uint32_t tckelcs;
|
|
uint32_t tcsckeh;
|
|
uint32_t tckehcs;
|
|
uint32_t tmrwckel;
|
|
uint32_t tzqcal;
|
|
uint32_t tzqlat;
|
|
uint32_t tzqcke;
|
|
uint32_t tvref_long;
|
|
uint32_t tvref_short;
|
|
uint32_t tvrcg_enable;
|
|
uint32_t tvrcg_disable;
|
|
uint32_t tfc_long;
|
|
uint32_t tckfspe;
|
|
uint32_t tckfspx;
|
|
uint32_t tckehcmd;
|
|
uint32_t tckelcmd;
|
|
uint32_t tckelpd;
|
|
uint32_t tckckel;
|
|
/* other */
|
|
uint32_t al;
|
|
uint32_t cl;
|
|
uint32_t cwl;
|
|
uint32_t bl;
|
|
};
|
|
|
|
struct dram_info_t {
|
|
/* speed_rate only used when DDR3 */
|
|
enum ddr3_speed_rate speed_rate;
|
|
/* 1: use CS0, 2: use CS0 and CS1 */
|
|
uint32_t cs_cnt;
|
|
/* give the max per-die capability on each rank/cs */
|
|
uint32_t per_die_capability[2];
|
|
};
|
|
|
|
struct timing_related_config {
|
|
struct dram_info_t dram_info[2];
|
|
uint32_t dram_type;
|
|
/* MHz */
|
|
uint32_t freq;
|
|
uint32_t ch_cnt;
|
|
uint32_t bl;
|
|
/* 1:auto precharge, 0:never auto precharge */
|
|
uint32_t ap;
|
|
/*
|
|
* 1:dll bypass, 0:dll normal
|
|
* dram and controller dll bypass at the same time
|
|
*/
|
|
uint32_t dllbp;
|
|
/* 1:odt enable, 0:odt disable */
|
|
uint32_t odt;
|
|
/* 1:enable, 0:disabe */
|
|
uint32_t rdbi;
|
|
uint32_t wdbi;
|
|
/* dram driver strength */
|
|
uint32_t dramds;
|
|
/* dram ODT, if odt=0, this parameter invalid */
|
|
uint32_t dramodt;
|
|
/*
|
|
* ca ODT, if odt=0, this parameter invalid
|
|
* it only used by LPDDR4
|
|
*/
|
|
uint32_t caodt;
|
|
};
|
|
|
|
/* mr0 for ddr3 */
|
|
#define DDR3_BL8 (0)
|
|
#define DDR3_BC4_8 (1)
|
|
#define DDR3_BC4 (2)
|
|
#define DDR3_CL(n) (((((n) - 4) & 0x7) << 4)\
|
|
| ((((n) - 4) & 0x8) >> 1))
|
|
#define DDR3_WR(n) (((n) & 0x7) << 9)
|
|
#define DDR3_DLL_RESET (1 << 8)
|
|
#define DDR3_DLL_DERESET (0 << 8)
|
|
|
|
/* mr1 for ddr3 */
|
|
#define DDR3_DLL_ENABLE (0)
|
|
#define DDR3_DLL_DISABLE (1)
|
|
#define DDR3_MR1_AL(n) (((n) & 0x3) << 3)
|
|
|
|
#define DDR3_DS_40 (0)
|
|
#define DDR3_DS_34 (1 << 1)
|
|
#define DDR3_RTT_NOM_DIS (0)
|
|
#define DDR3_RTT_NOM_60 (1 << 2)
|
|
#define DDR3_RTT_NOM_120 (1 << 6)
|
|
#define DDR3_RTT_NOM_40 ((1 << 2) | (1 << 6))
|
|
#define DDR3_TDQS (1 << 11)
|
|
|
|
/* mr2 for ddr3 */
|
|
#define DDR3_MR2_CWL(n) ((((n) - 5) & 0x7) << 3)
|
|
#define DDR3_RTT_WR_DIS (0)
|
|
#define DDR3_RTT_WR_60 (1 << 9)
|
|
#define DDR3_RTT_WR_120 (2 << 9)
|
|
|
|
/*
|
|
* MR0 (Device Information)
|
|
* 0:DAI complete, 1:DAI still in progress
|
|
*/
|
|
#define LPDDR2_DAI (0x1)
|
|
/* 0:S2 or S4 SDRAM, 1:NVM */
|
|
#define LPDDR2_DI (0x1 << 1)
|
|
/* 0:DNV not supported, 1:DNV supported */
|
|
#define LPDDR2_DNVI (0x1 << 2)
|
|
#define LPDDR2_RZQI (0x3 << 3)
|
|
|
|
/*
|
|
* 00:RZQ self test not supported,
|
|
* 01:ZQ-pin may connect to VDDCA or float
|
|
* 10:ZQ-pin may short to GND.
|
|
* 11:ZQ-pin self test completed, no error condition detected.
|
|
*/
|
|
|
|
/* MR1 (Device Feature) */
|
|
#define LPDDR2_BL4 (0x2)
|
|
#define LPDDR2_BL8 (0x3)
|
|
#define LPDDR2_BL16 (0x4)
|
|
#define LPDDR2_N_WR(n) (((n) - 2) << 5)
|
|
|
|
/* MR2 (Device Feature 2) */
|
|
#define LPDDR2_RL3_WL1 (0x1)
|
|
#define LPDDR2_RL4_WL2 (0x2)
|
|
#define LPDDR2_RL5_WL2 (0x3)
|
|
#define LPDDR2_RL6_WL3 (0x4)
|
|
#define LPDDR2_RL7_WL4 (0x5)
|
|
#define LPDDR2_RL8_WL4 (0x6)
|
|
|
|
/* MR3 (IO Configuration 1) */
|
|
#define LPDDR2_DS_34 (0x1)
|
|
#define LPDDR2_DS_40 (0x2)
|
|
#define LPDDR2_DS_48 (0x3)
|
|
#define LPDDR2_DS_60 (0x4)
|
|
#define LPDDR2_DS_80 (0x6)
|
|
/* optional */
|
|
#define LPDDR2_DS_120 (0x7)
|
|
|
|
/* MR4 (Device Temperature) */
|
|
#define LPDDR2_TREF_MASK (0x7)
|
|
#define LPDDR2_4_TREF (0x1)
|
|
#define LPDDR2_2_TREF (0x2)
|
|
#define LPDDR2_1_TREF (0x3)
|
|
#define LPDDR2_025_TREF (0x5)
|
|
#define LPDDR2_025_TREF_DERATE (0x6)
|
|
|
|
#define LPDDR2_TUF (0x1 << 7)
|
|
|
|
/* MR8 (Basic configuration 4) */
|
|
#define LPDDR2_S4 (0x0)
|
|
#define LPDDR2_S2 (0x1)
|
|
#define LPDDR2_N (0x2)
|
|
/* Unit:MB */
|
|
#define LPDDR2_DENSITY(mr8) (8 << (((mr8) >> 2) & 0xf))
|
|
#define LPDDR2_IO_WIDTH(mr8) (32 >> (((mr8) >> 6) & 0x3))
|
|
|
|
/* MR10 (Calibration) */
|
|
#define LPDDR2_ZQINIT (0xff)
|
|
#define LPDDR2_ZQCL (0xab)
|
|
#define LPDDR2_ZQCS (0x56)
|
|
#define LPDDR2_ZQRESET (0xc3)
|
|
|
|
/* MR16 (PASR Bank Mask), S2 SDRAM Only */
|
|
#define LPDDR2_PASR_FULL (0x0)
|
|
#define LPDDR2_PASR_1_2 (0x1)
|
|
#define LPDDR2_PASR_1_4 (0x2)
|
|
#define LPDDR2_PASR_1_8 (0x3)
|
|
|
|
/*
|
|
* MR0 (Device Information)
|
|
* 0:DAI complete,
|
|
* 1:DAI still in progress
|
|
*/
|
|
#define LPDDR3_DAI (0x1)
|
|
/*
|
|
* 00:RZQ self test not supported,
|
|
* 01:ZQ-pin may connect to VDDCA or float
|
|
* 10:ZQ-pin may short to GND.
|
|
* 11:ZQ-pin self test completed, no error condition detected.
|
|
*/
|
|
#define LPDDR3_RZQI (0x3 << 3)
|
|
/*
|
|
* 0:DRAM does not support WL(Set B),
|
|
* 1:DRAM support WL(Set B)
|
|
*/
|
|
#define LPDDR3_WL_SUPOT (1 << 6)
|
|
/*
|
|
* 0:DRAM does not support RL=3,nWR=3,WL=1;
|
|
* 1:DRAM supports RL=3,nWR=3,WL=1 for frequencies <=166
|
|
*/
|
|
#define LPDDR3_RL3_SUPOT (1 << 7)
|
|
|
|
/* MR1 (Device Feature) */
|
|
#define LPDDR3_BL8 (0x3)
|
|
#define LPDDR3_N_WR(n) ((n) << 5)
|
|
|
|
/* MR2 (Device Feature 2), WL Set A,default */
|
|
/* <=166MHz,optional*/
|
|
#define LPDDR3_RL3_WL1 (0x1)
|
|
/* <=400MHz*/
|
|
#define LPDDR3_RL6_WL3 (0x4)
|
|
/* <=533MHz*/
|
|
#define LPDDR3_RL8_WL4 (0x6)
|
|
/* <=600MHz*/
|
|
#define LPDDR3_RL9_WL5 (0x7)
|
|
/* <=667MHz,default*/
|
|
#define LPDDR3_RL10_WL6 (0x8)
|
|
/* <=733MHz*/
|
|
#define LPDDR3_RL11_WL6 (0x9)
|
|
/* <=800MHz*/
|
|
#define LPDDR3_RL12_WL6 (0xa)
|
|
/* <=933MHz*/
|
|
#define LPDDR3_RL14_WL8 (0xc)
|
|
/* <=1066MHz*/
|
|
#define LPDDR3_RL16_WL8 (0xe)
|
|
|
|
/* WL Set B, optional */
|
|
/* <=667MHz,default*/
|
|
#define LPDDR3_RL10_WL8 (0x8)
|
|
/* <=733MHz*/
|
|
#define LPDDR3_RL11_WL9 (0x9)
|
|
/* <=800MHz*/
|
|
#define LPDDR3_RL12_WL9 (0xa)
|
|
/* <=933MHz*/
|
|
#define LPDDR3_RL14_WL11 (0xc)
|
|
/* <=1066MHz*/
|
|
#define LPDDR3_RL16_WL13 (0xe)
|
|
|
|
/* 1:enable nWR programming > 9(default)*/
|
|
#define LPDDR3_N_WRE (1 << 4)
|
|
/* 1:Select WL Set B*/
|
|
#define LPDDR3_WL_S (1 << 6)
|
|
/* 1:enable*/
|
|
#define LPDDR3_WR_LEVEL (1 << 7)
|
|
|
|
/* MR3 (IO Configuration 1) */
|
|
#define LPDDR3_DS_34 (0x1)
|
|
#define LPDDR3_DS_40 (0x2)
|
|
#define LPDDR3_DS_48 (0x3)
|
|
#define LPDDR3_DS_60 (0x4)
|
|
#define LPDDR3_DS_80 (0x6)
|
|
#define LPDDR3_DS_34D_40U (0x9)
|
|
#define LPDDR3_DS_40D_48U (0xa)
|
|
#define LPDDR3_DS_34D_48U (0xb)
|
|
|
|
/* MR4 (Device Temperature) */
|
|
#define LPDDR3_TREF_MASK (0x7)
|
|
/* SDRAM Low temperature operating limit exceeded */
|
|
#define LPDDR3_LT_EXED (0x0)
|
|
#define LPDDR3_4_TREF (0x1)
|
|
#define LPDDR3_2_TREF (0x2)
|
|
#define LPDDR3_1_TREF (0x3)
|
|
#define LPDDR3_05_TREF (0x4)
|
|
#define LPDDR3_025_TREF (0x5)
|
|
#define LPDDR3_025_TREF_DERATE (0x6)
|
|
/* SDRAM High temperature operating limit exceeded */
|
|
#define LPDDR3_HT_EXED (0x7)
|
|
|
|
/* 1:value has changed since last read of MR4 */
|
|
#define LPDDR3_TUF (0x1 << 7)
|
|
|
|
/* MR8 (Basic configuration 4) */
|
|
#define LPDDR3_S8 (0x3)
|
|
#define LPDDR3_DENSITY(mr8) (8 << (((mr8) >> 2) & 0xf))
|
|
#define LPDDR3_IO_WIDTH(mr8) (32 >> (((mr8) >> 6) & 0x3))
|
|
|
|
/* MR10 (Calibration) */
|
|
#define LPDDR3_ZQINIT (0xff)
|
|
#define LPDDR3_ZQCL (0xab)
|
|
#define LPDDR3_ZQCS (0x56)
|
|
#define LPDDR3_ZQRESET (0xc3)
|
|
|
|
/* MR11 (ODT Control) */
|
|
#define LPDDR3_ODT_60 (1)
|
|
#define LPDDR3_ODT_120 (2)
|
|
#define LPDDR3_ODT_240 (3)
|
|
#define LPDDR3_ODT_DIS (0)
|
|
|
|
/* MR2 (Device Feature 2) */
|
|
/* RL & nRTP for DBI-RD Disabled */
|
|
#define LPDDR4_RL6_NRTP8 (0x0)
|
|
#define LPDDR4_RL10_NRTP8 (0x1)
|
|
#define LPDDR4_RL14_NRTP8 (0x2)
|
|
#define LPDDR4_RL20_NRTP8 (0x3)
|
|
#define LPDDR4_RL24_NRTP10 (0x4)
|
|
#define LPDDR4_RL28_NRTP12 (0x5)
|
|
#define LPDDR4_RL32_NRTP14 (0x6)
|
|
#define LPDDR4_RL36_NRTP16 (0x7)
|
|
/* RL & nRTP for DBI-RD Disabled */
|
|
#define LPDDR4_RL12_NRTP8 (0x1)
|
|
#define LPDDR4_RL16_NRTP8 (0x2)
|
|
#define LPDDR4_RL22_NRTP8 (0x3)
|
|
#define LPDDR4_RL28_NRTP10 (0x4)
|
|
#define LPDDR4_RL32_NRTP12 (0x5)
|
|
#define LPDDR4_RL36_NRTP14 (0x6)
|
|
#define LPDDR4_RL40_NRTP16 (0x7)
|
|
/* WL Set A,default */
|
|
#define LPDDR4_A_WL4 (0x0)
|
|
#define LPDDR4_A_WL6 (0x1)
|
|
#define LPDDR4_A_WL8 (0x2)
|
|
#define LPDDR4_A_WL10 (0x3)
|
|
#define LPDDR4_A_WL12 (0x4)
|
|
#define LPDDR4_A_WL14 (0x5)
|
|
#define LPDDR4_A_WL16 (0x6)
|
|
#define LPDDR4_A_WL18 (0x7)
|
|
/* WL Set B, optional */
|
|
#define LPDDR4_B_WL4 (0x0 << 3)
|
|
#define LPDDR4_B_WL8 (0x1 << 3)
|
|
#define LPDDR4_B_WL12 (0x2 << 3)
|
|
#define LPDDR4_B_WL18 (0x3 << 3)
|
|
#define LPDDR4_B_WL22 (0x4 << 3)
|
|
#define LPDDR4_B_WL26 (0x5 << 3)
|
|
#define LPDDR4_B_WL30 (0x6 << 3)
|
|
#define LPDDR4_B_WL34 (0x7 << 3)
|
|
/* 1:Select WL Set B*/
|
|
#define LPDDR4_WL_B (1 << 6)
|
|
/* 1:enable*/
|
|
#define LPDDR4_WR_LEVEL (1 << 7)
|
|
|
|
/* MR3 */
|
|
#define LPDDR4_VDDQ_2_5 (0)
|
|
#define LPDDR4_VDDQ_3 (1)
|
|
#define LPDDR4_WRPST_0_5_TCK (0 << 1)
|
|
#define LPDDR4_WRPST_1_5_TCK (1 << 1)
|
|
#define LPDDR4_PPR_EN (1 << 2)
|
|
/* PDDS */
|
|
#define LPDDR4_PDDS_240 (0x1 << 3)
|
|
#define LPDDR4_PDDS_120 (0x2 << 3)
|
|
#define LPDDR4_PDDS_80 (0x3 << 3)
|
|
#define LPDDR4_PDDS_60 (0x4 << 3)
|
|
#define LPDDR4_PDDS_48 (0x5 << 3)
|
|
#define LPDDR4_PDDS_40 (0x6 << 3)
|
|
#define LPDDR4_DBI_RD_EN (1 << 6)
|
|
#define LPDDR4_DBI_WR_EN (1 << 7)
|
|
|
|
/* MR11 (ODT Control) */
|
|
#define LPDDR4_DQODT_240 (1)
|
|
#define LPDDR4_DQODT_120 (2)
|
|
#define LPDDR4_DQODT_80 (3)
|
|
#define LPDDR4_DQODT_60 (4)
|
|
#define LPDDR4_DQODT_48 (5)
|
|
#define LPDDR4_DQODT_40 (6)
|
|
#define LPDDR4_DQODT_DIS (0)
|
|
#define LPDDR4_CAODT_240 (1 << 4)
|
|
#define LPDDR4_CAODT_120 (2 << 4)
|
|
#define LPDDR4_CAODT_80 (3 << 4)
|
|
#define LPDDR4_CAODT_60 (4 << 4)
|
|
#define LPDDR4_CAODT_48 (5 << 4)
|
|
#define LPDDR4_CAODT_40 (6 << 4)
|
|
#define LPDDR4_CAODT_DIS (0 << 4)
|
|
|
|
/*
|
|
* Description: depend on input parameter "timing_config",
|
|
* and calculate correspond "dram_type"
|
|
* spec timing to "pdram_timing"
|
|
* parameters:
|
|
* input: timing_config
|
|
* output: pdram_timing
|
|
* NOTE: MR ODT is set, need to disable by controller
|
|
*/
|
|
void dram_get_parameter(struct timing_related_config *timing_config,
|
|
struct dram_timing_t *pdram_timing);
|
|
|
|
#endif /* DRAM_SPEC_TIMING_H */
|
|
|