You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
188 lines
4.8 KiB
188 lines
4.8 KiB
/*
|
|
* Copyright (c) 2019-2020, STMicroelectronics - All Rights Reserved
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#ifndef DRIVERS_RAW_NAND_H
|
|
#define DRIVERS_RAW_NAND_H
|
|
|
|
#include <cdefs.h>
|
|
#include <stdint.h>
|
|
|
|
#include <drivers/nand.h>
|
|
|
|
/* NAND ONFI default value mode 0 in picosecond */
|
|
#define NAND_TADL_MIN 400000UL
|
|
#define NAND_TALH_MIN 20000UL
|
|
#define NAND_TALS_MIN 50000UL
|
|
#define NAND_TAR_MIN 25000UL
|
|
#define NAND_TCCS_MIN 500000UL
|
|
#define NAND_TCEA_MIN 100000UL
|
|
#define NAND_TCEH_MIN 20000UL
|
|
#define NAND_TCH_MIN 20000UL
|
|
#define NAND_TCHZ_MAX 100000UL
|
|
#define NAND_TCLH_MIN 20000UL
|
|
#define NAND_TCLR_MIN 20000UL
|
|
#define NAND_TCLS_MIN 50000UL
|
|
#define NAND_TCOH_MIN 0UL
|
|
#define NAND_TCS_MIN 70000UL
|
|
#define NAND_TDH_MIN 20000UL
|
|
#define NAND_TDS_MIN 40000UL
|
|
#define NAND_TFEAT_MAX 1000000UL
|
|
#define NAND_TIR_MIN 10000UL
|
|
#define NAND_TITC_MIN 1000000UL
|
|
#define NAND_TR_MAX 200000000UL
|
|
#define NAND_TRC_MIN 100000UL
|
|
#define NAND_TREA_MAX 40000UL
|
|
#define NAND_TREH_MIN 30000UL
|
|
#define NAND_TRHOH_MIN 0UL
|
|
#define NAND_TRHW_MIN 200000UL
|
|
#define NAND_TRHZ_MAX 200000UL
|
|
#define NAND_TRLOH_MIN 0UL
|
|
#define NAND_TRP_MIN 50000UL
|
|
#define NAND_TRR_MIN 40000UL
|
|
#define NAND_TRST_MAX 250000000000ULL
|
|
#define NAND_TWB_MAX 200000UL
|
|
#define NAND_TWC_MIN 100000UL
|
|
#define NAND_TWH_MIN 30000UL
|
|
#define NAND_TWHR_MIN 120000UL
|
|
#define NAND_TWP_MIN 50000UL
|
|
#define NAND_TWW_MIN 100000UL
|
|
|
|
/* NAND request types */
|
|
#define NAND_REQ_CMD 0x0000U
|
|
#define NAND_REQ_ADDR 0x1000U
|
|
#define NAND_REQ_DATAIN 0x2000U
|
|
#define NAND_REQ_DATAOUT 0x3000U
|
|
#define NAND_REQ_WAIT 0x4000U
|
|
#define NAND_REQ_MASK GENMASK(14, 12)
|
|
#define NAND_REQ_BUS_WIDTH_8 BIT(15)
|
|
|
|
#define PARAM_PAGE_SIZE 256
|
|
|
|
/* NAND ONFI commands */
|
|
#define NAND_CMD_READ_1ST 0x00U
|
|
#define NAND_CMD_CHANGE_1ST 0x05U
|
|
#define NAND_CMD_READID_SIG_ADDR 0x20U
|
|
#define NAND_CMD_READ_2ND 0x30U
|
|
#define NAND_CMD_STATUS 0x70U
|
|
#define NAND_CMD_READID 0x90U
|
|
#define NAND_CMD_CHANGE_2ND 0xE0U
|
|
#define NAND_CMD_READ_PARAM_PAGE 0xECU
|
|
#define NAND_CMD_RESET 0xFFU
|
|
|
|
#define ONFI_REV_21 BIT(3)
|
|
#define ONFI_FEAT_BUS_WIDTH_16 BIT(0)
|
|
#define ONFI_FEAT_EXTENDED_PARAM BIT(7)
|
|
|
|
/* NAND ECC type */
|
|
#define NAND_ECC_NONE U(0)
|
|
#define NAND_ECC_HW U(1)
|
|
#define NAND_ECC_ONDIE U(2)
|
|
|
|
/* NAND bus width */
|
|
#define NAND_BUS_WIDTH_8 U(0)
|
|
#define NAND_BUS_WIDTH_16 U(1)
|
|
|
|
struct nand_req {
|
|
struct nand_device *nand;
|
|
uint16_t type;
|
|
uint8_t *addr;
|
|
unsigned int length;
|
|
unsigned int delay_ms;
|
|
unsigned int inst_delay;
|
|
};
|
|
|
|
struct nand_param_page {
|
|
/* Rev information and feature block */
|
|
uint32_t page_sig;
|
|
uint16_t rev;
|
|
uint16_t features;
|
|
uint16_t opt_cmd;
|
|
uint8_t jtg;
|
|
uint8_t train_cmd;
|
|
uint16_t ext_param_length;
|
|
uint8_t nb_param_pages;
|
|
uint8_t reserved1[17];
|
|
/* Manufacturer information */
|
|
uint8_t manufacturer[12];
|
|
uint8_t model[20];
|
|
uint8_t manufacturer_id;
|
|
uint16_t data_code;
|
|
uint8_t reserved2[13];
|
|
/* Memory organization */
|
|
uint32_t bytes_per_page;
|
|
uint16_t spare_per_page;
|
|
uint32_t bytes_per_partial;
|
|
uint16_t spare_per_partial;
|
|
uint32_t num_pages_per_blk;
|
|
uint32_t num_blk_in_lun;
|
|
uint8_t num_lun;
|
|
uint8_t num_addr_cycles;
|
|
uint8_t bit_per_cell;
|
|
uint16_t max_bb_per_lun;
|
|
uint16_t blk_endur;
|
|
uint8_t valid_blk_begin;
|
|
uint16_t blk_enbur_valid;
|
|
uint8_t nb_prog_page;
|
|
uint8_t partial_prog_attr;
|
|
uint8_t nb_ecc_bits;
|
|
uint8_t plane_addr;
|
|
uint8_t mplanes_ops;
|
|
uint8_t ez_nand;
|
|
uint8_t reserved3[12];
|
|
/* Electrical parameters */
|
|
uint8_t io_pin_cap_max;
|
|
uint16_t sdr_timing_mode;
|
|
uint16_t sdr_prog_cache_timing;
|
|
uint16_t tprog;
|
|
uint16_t tbers;
|
|
uint16_t tr;
|
|
uint16_t tccs;
|
|
uint8_t nvddr_timing_mode;
|
|
uint8_t nvddr2_timing_mode;
|
|
uint8_t nvddr_features;
|
|
uint16_t clk_input_cap_typ;
|
|
uint16_t io_pin_cap_typ;
|
|
uint16_t input_pin_cap_typ;
|
|
uint8_t input_pin_cap_max;
|
|
uint8_t drv_strength_support;
|
|
uint16_t tr_max;
|
|
uint16_t tadl;
|
|
uint16_t tr_typ;
|
|
uint8_t reserved4[6];
|
|
/* Vendor block */
|
|
uint16_t vendor_revision;
|
|
uint8_t vendor[88];
|
|
uint16_t crc16;
|
|
} __packed;
|
|
|
|
struct nand_ctrl_ops {
|
|
int (*exec)(struct nand_req *req);
|
|
void (*setup)(struct nand_device *nand);
|
|
};
|
|
|
|
struct rawnand_device {
|
|
struct nand_device *nand_dev;
|
|
const struct nand_ctrl_ops *ops;
|
|
};
|
|
|
|
int nand_raw_init(unsigned long long *size, unsigned int *erase_size);
|
|
int nand_wait_ready(unsigned int delay_ms);
|
|
int nand_read_page_cmd(unsigned int page, unsigned int offset,
|
|
uintptr_t buffer, unsigned int len);
|
|
int nand_change_read_column_cmd(unsigned int offset, uintptr_t buffer,
|
|
unsigned int len);
|
|
void nand_raw_ctrl_init(const struct nand_ctrl_ops *ops);
|
|
|
|
/*
|
|
* Platform can implement this to override default raw NAND instance
|
|
* configuration.
|
|
*
|
|
* @device: target raw NAND instance.
|
|
* Return 0 on success, negative value otherwise.
|
|
*/
|
|
int plat_get_raw_nand_data(struct rawnand_device *device);
|
|
|
|
#endif /* DRIVERS_RAW_NAND_H */
|
|
|