A mistake was made in the publication of `wit-parser` where a breaking
change was made without bumping its major version, causing build issues
on `main` if `wit-parser` is updated. This commit updates `wit-parser`
to the latest and we'll handle breaking changes better next time.
Closes#5390
* egraph support: rewrite to work in terms of CLIF data structures.
This work rewrites the "egraph"-based optimization framework in
Cranelift to operate on aegraphs (acyclic egraphs) represented in the
CLIF itself rather than as a separate data structure to which and from
which we translate the CLIF.
The basic idea is to add a new kind of value, a "union", that is like an
alias but refers to two other values rather than one. This allows us to
represent an eclass of enodes (values) as a tree. The union node allows
for a value to have *multiple representations*: either constituent value
could be used, and (in well-formed CLIF produced by correct
optimization rules) they must be equivalent.
Like the old egraph infrastructure, we take advantage of acyclicity and
eager rule application to do optimization in a single pass. Like before,
we integrate GVN (during the optimization pass) and LICM (during
elaboration).
Unlike the old egraph infrastructure, everything stays in the
DataFlowGraph. "Pure" enodes are represented as instructions that have
values attached, but that are not placed into the function layout. When
entering "egraph" form, we remove them from the layout while optimizing.
When leaving "egraph" form, during elaboration, we can place an
instruction back into the layout the first time we elaborate the enode;
if we elaborate it more than once, we clone the instruction.
The implementation performs two passes overall:
- One, a forward pass in RPO (to see defs before uses), that (i) removes
"pure" instructions from the layout and (ii) optimizes as it goes. As
before, we eagerly optimize, so we form the entire union of optimized
forms of a value before we see any uses of that value. This lets us
rewrite uses to use the most "up-to-date" form of the value and
canonicalize and optimize that form.
The eager rewriting and acyclic representation make each other work
(we could not eagerly rewrite if there were cycles; and acyclicity
does not miss optimization opportunities only because the first time
we introduce a value, we immediately produce its "best" form). This
design choice is also what allows us to avoid the "parent pointers"
and fixpoint loop of traditional egraphs.
This forward optimization pass keeps a scoped hashmap to "intern"
nodes (thus performing GVN), and also interleaves on a per-instruction
level with alias analysis. The interleaving with alias analysis allows
alias analysis to see the most optimized form of each address (so it
can see equivalences), and allows the next value to see any
equivalences (reuses of loads or stored values) that alias analysis
uncovers.
- Two, a forward pass in domtree preorder, that "elaborates" pure enodes
back into the layout, possibly in multiple places if needed. This
tracks the loop nest and hoists nodes as needed, performing LICM as it
goes. Note that by doing this in forward order, we avoid the
"fixpoint" that traditional LICM needs: we hoist a def before its
uses, so when we place a node, we place it in the right place the
first time rather than moving later.
This PR replaces the old (a)egraph implementation. It removes both the
cranelift-egraph crate and the logic in cranelift-codegen that uses it.
On `spidermonkey.wasm` running a simple recursive Fibonacci
microbenchmark, this work shows 5.5% compile-time reduction and 7.7%
runtime improvement (speedup).
Most of this implementation was done in (very productive) pair
programming sessions with Jamey Sharp, thus:
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
* Review feedback.
* Review feedback.
* Review feedback.
* Bugfix: cprop rule: `(x + k1) - k2` becomes `x - (k2 - k1)`, not `x - (k1 - k2)`.
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
* Import Wasmtime support from the `wit-bindgen` repo
This commit imports the `wit-bindgen-gen-host-wasmtime-rust` crate from
the `wit-bindgen` repository into the upstream Wasmtime repository. I've
chosen to not import the full history here since the crate is relatively
small and doesn't have a ton of complexity. While the history of the
crate is quite long the current iteration of the crate's history is
relatively short so there's not a ton of import there anyway. The
thinking is that this can now continue to evolve in-tree.
* Refactor `wasmtime-component-macro` a bit
Make room for a `wit_bindgen` macro to slot in.
* Add initial support for a `bindgen` macro
* Add tests for `wasmtime::component::bindgen!`
* Improve error forgetting `async` feature
* Add end-to-end tests for bindgen
* Add an audit of `unicase`
* Add a license to the test-helpers crate
* Add vet entry for `pulldown-cmark`
* Update publish script with new crate
* Try to fix publish script
* Update audits
* Update lock file
* Add release notes for 3.0.1
* Update some version directives for crates in Wasmtime
* Mark anything with `publish = false` as version 0.0.0
* Mark the icache coherence crate with the same version as Wasmtime
* Fix manifest directives
* Remove some custom error types in Wasmtime
These types are mostly cumbersome to work with nowadays that `anyhow` is
used everywhere else. This commit removes `InstantiationError` and
`SetupError` in favor of using `anyhow::Error` throughout. This can
eventually culminate in creation of specific errors for embedders to
downcast to but for now this should be general enough.
* Fix Windows build
The main change here is that io-lifetimes 1.0 switches to use the I/O safety
feature in the standard library rather than providing its own copy.
This also updates to windows-sys 0.42.0 and rustix 0.36.
There were several issues with ISLE's existing error reporting
implementation.
- When using Miette for more readable error reports, it would panic if
errors were reported from multiple files in the same run.
- Miette is pretty heavy-weight for what we're doing, with a lot of
dependencies.
- The `Error::Errors` enum variant led to normalization steps in many
places, to avoid using that variant to represent a single error.
This commit:
- replaces Miette with codespan-reporting
- gets rid of a bunch of cargo-vet exemptions
- replaces the `Error::Errors` variant with a new `Errors` type
- removes source info from `Error` variants so they're easy to construct
- adds source info only when formatting `Errors`
- formats `Errors` with a custom `Debug` impl
- shares common code between ISLE's callers, islec and cranelift-codegen
- includes a source snippet even with fancy-errors disabled
I tried to make this a series of smaller commits but I couldn't find any
good split points; everything was too entangled with everything else.
* feat: implement memory.atomic.notify,wait32,wait64
Added the parking_spot crate, which provides the needed registry for the
operations.
Signed-off-by: Harald Hoyer <harald@profian.com>
* fix: change trap message for HeapMisaligned
The threads spec test wants "unaligned atomic"
instead of "misaligned memory access".
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add test for atomic wait on non-shared memory
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add tests/spec_testsuite/proposals/threads
without pooling and reference types.
Also "shared_memory" is added to the "spectest" interface.
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add atomics_notify.wast
checking that notify with 0 waiters returns 0 on shared and non-shared
memory.
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add tests for atomic wait on shared memory
- return 2 - timeout for 0
- return 2 - timeout for 1000ns
- return 1 - invalid value
Signed-off-by: Harald Hoyer <harald@profian.com>
* fixup! feat: implement memory.atomic.notify,wait32,wait64
Signed-off-by: Harald Hoyer <harald@profian.com>
* fixup! feat: implement memory.atomic.notify,wait32,wait64
Signed-off-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Harald Hoyer <harald@profian.com>
* Return `anyhow::Error` from host functions instead of `Trap`
This commit refactors how errors are modeled when returned from host
functions and additionally refactors how custom errors work with `Trap`.
At a high level functions in Wasmtime that previously worked with
`Result<T, Trap>` now work with `Result<T>` instead where the error is
`anyhow::Error`. This includes functions such as:
* Host-defined functions in a `Linker<T>`
* `TypedFunc::call`
* Host-related callbacks like call hooks
Errors are now modeled primarily as `anyhow::Error` throughout Wasmtime.
This subsequently removes the need for `Trap` to have the ability to
represent all host-defined errors as it previously did. Consequently the
`From` implementations for any error into a `Trap` have been removed
here and the only embedder-defined way to create a `Trap` is to use
`Trap::new` with a custom string.
After this commit the distinction between a `Trap` and a host error is
the wasm backtrace that it contains. Previously all errors in host
functions would flow through a `Trap` and get a wasm backtrace attached
to them, but now this only happens if a `Trap` itself is created meaning
that arbitrary host-defined errors flowing from a host import to the
other side won't get backtraces attached. Some internals of Wasmtime
itself were updated or preserved to use `Trap::new` to capture a
backtrace where it seemed useful, such as when fuel runs out.
The main motivation for this commit is that it now enables hosts to
thread a concrete error type from a host function all the way through to
where a wasm function was invoked. Previously this could not be done
since the host error was wrapped in a `Trap` that didn't provide the
ability to get at the internals.
A consequence of this commit is that when a host error is returned that
isn't a `Trap` we'll capture a backtrace and then won't have a `Trap` to
attach it to. To avoid losing the contextual information this commit
uses the `Error::context` method to attach the backtrace as contextual
information to ensure that the backtrace is itself not lost.
This is a breaking change for likely all users of Wasmtime, but it's
hoped to be a relatively minor change to workaround. Most use cases can
likely change `-> Result<T, Trap>` to `-> Result<T>` and otherwise
explicit creation of a `Trap` is largely no longer necessary.
* Fix some doc links
* add some tests and make a backtrace type public (#55)
* Trap: avoid a trailing newline in the Display impl
which in turn ends up with three newlines between the end of the
backtrace and the `Caused by` in the anyhow Debug impl
* make BacktraceContext pub, and add tests showing downcasting behavior of anyhow::Error to traps or backtraces
* Remove now-unnecesary `Trap` downcasts in `Linker::module`
* Fix test output expectations
* Remove `Trap::i32_exit`
This commit removes special-handling in the `wasmtime::Trap` type for
the i32 exit code required by WASI. This is now instead modeled as a
specific `I32Exit` error type in the `wasmtime-wasi` crate which is
returned by the `proc_exit` hostcall. Embedders which previously tested
for i32 exits now downcast to the `I32Exit` value.
* Remove the `Trap::new` constructor
This commit removes the ability to create a trap with an arbitrary error
message. The purpose of this commit is to continue the prior trend of
leaning into the `anyhow::Error` type instead of trying to recreate it
with `Trap`. A subsequent simplification to `Trap` after this commit is
that `Trap` will simply be an `enum` of trap codes with no extra
information. This commit is doubly-motivated by the desire to always use
the new `BacktraceContext` type instead of sometimes using that and
sometimes using `Trap`.
Most of the changes here were around updating `Trap::new` calls to
`bail!` calls instead. Tests which assert particular error messages
additionally often needed to use the `:?` formatter instead of the `{}`
formatter because the prior formats the whole `anyhow::Error` and the
latter only formats the top-most error, which now contains the
backtrace.
* Merge `Trap` and `TrapCode`
With prior refactorings there's no more need for `Trap` to be opaque or
otherwise contain a backtrace. This commit parse down `Trap` to simply
an `enum` which was the old `TrapCode`. All various tests and such were
updated to handle this.
The main consequence of this commit is that all errors have a
`BacktraceContext` context attached to them. This unfortunately means
that the backtrace is printed first before the error message or trap
code, but given all the prior simplifications that seems worth it at
this time.
* Rename `BacktraceContext` to `WasmBacktrace`
This feels like a better name given how this has turned out, and
additionally this commit removes having both `WasmBacktrace` and
`BacktraceContext`.
* Soup up documentation for errors and traps
* Fix build of the C API
Co-authored-by: Pat Hickey <pat@moreproductive.org>
* Pull `Module` out of `ModuleTextBuilder`
This commit is the first in what will likely be a number towards
preparing for serializing a compiled component to bytes, a precompiled
artifact. To that end my rough plan is to merge all of the compiled
artifacts for a component into one large object file instead of having
lots of separate object files and lots of separate mmaps to manage. To
that end I plan on eventually using `ModuleTextBuilder` to build one
large text section for all core wasm modules and trampolines, meaning
that `ModuleTextBuilder` is no longer specific to one module. I've
extracted out functionality such as function name calculation as well as
relocation resolving (now a closure passed in) in preparation for this.
For now this just keeps tests passing, and the trajectory for this
should become more clear over the following commits.
* Remove component-specific object emission
This commit removes the `ComponentCompiler::emit_obj` function in favor
of `Compiler::emit_obj`, now renamed `append_code`. This involved
significantly refactoring code emission to take a flat list of functions
into `append_code` and the caller is responsible for weaving together
various "families" of functions and un-weaving them afterwards.
* Consolidate ELF parsing in `CodeMemory`
This commit moves the ELF file parsing and section iteration from
`CompiledModule` into `CodeMemory` so one location keeps track of
section ranges and such. This is in preparation for sharing much of this
code with components which needs all the same sections to get tracked
but won't be using `CompiledModule`. A small side benefit from this is
that the section parsing done in `CodeMemory` and `CompiledModule` is no
longer duplicated.
* Remove separately tracked traps in components
Previously components would generate an "always trapping" function
and the metadata around which pc was allowed to trap was handled
manually for components. With recent refactorings the Wasmtime-standard
trap section in object files is now being generated for components as
well which means that can be reused instead of custom-tracking this
metadata. This commit removes the manual tracking for the `always_trap`
functions and plumbs the necessary bits around to make components look
more like modules.
* Remove a now-unnecessary `Arc` in `Module`
Not expected to have any measurable impact on performance, but
complexity-wise this should make it a bit easier to understand the
internals since there's no longer any need to store this somewhere else
than its owner's location.
* Merge compilation artifacts of components
This commit is a large refactoring of the component compilation process
to produce a single artifact instead of multiple binary artifacts. The
core wasm compilation process is refactored as well to share as much
code as necessary with the component compilation process.
This method of representing a compiled component necessitated a few
medium-sized changes internally within Wasmtime:
* A new data structure was created, `CodeObject`, which represents
metadata about a single compiled artifact. This is then stored as an
`Arc` within a component and a module. For `Module` this is always
uniquely owned and represents a shuffling around of data from one
owner to another. For a `Component`, however, this is shared amongst
all loaded modules and the top-level component.
* The "module registry" which is used for symbolicating backtraces and
for trap information has been updated to account for a single region
of loaded code holding possibly multiple modules. This involved adding
a second-level `BTreeMap` for now. This will likely slow down
instantiation slightly but if it poses an issue in the future this
should be able to be represented with a more clever data structure.
This commit additionally solves a number of longstanding issues with
components such as compiling only one host-to-wasm trampoline per
signature instead of possibly once-per-module. Additionally the
`SignatureCollection` registration now happens once-per-component
instead of once-per-module-within-a-component.
* Fix compile errors from prior commits
* Support AOT-compiling components
This commit adds support for AOT-compiled components in the same manner
as `Module`, specifically adding:
* `Engine::precompile_component`
* `Component::serialize`
* `Component::deserialize`
* `Component::deserialize_file`
Internally the support for components looks quite similar to `Module`.
All the prior commits to this made adding the support here
(unsurprisingly) easy. Components are represented as a single object
file as are modules, and the functions for each module are all piled
into the same object file next to each other (as are areas such as data
sections). Support was also added here to quickly differentiate compiled
components vs compiled modules via the `e_flags` field in the ELF
header.
* Prevent serializing exported modules on components
The current representation of a module within a component means that the
implementation of `Module::serialize` will not work if the module is
exported from a component. The reason for this is that `serialize`
doesn't actually do anything and simply returns the underlying mmap as a
list of bytes. The mmap, however, has `.wasmtime.info` describing
component metadata as opposed to this module's metadata. While rewriting
this section could be implemented it's not so easy to do so and is
otherwise seen as not super important of a feature right now anyway.
* Fix windows build
* Fix an unused function warning
* Update crates/environ/src/compilation.rs
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Initial skeleton for Winch
This commit introduces the initial skeleton for Winch, the "baseline"
compiler.
This skeleton contains mostly setup code for the ISA, ABI, registers,
and compilation environment abstractions. It also includes the
calculation of function local slots.
As of this commit, the structure of these abstractions looks like the
following:
+------------------------+
| v
+----------+ +-----+ +-----------+-----+-----------------+
| Compiler | --> | ISA | --> | Registers | ABI | Compilation Env |
+----------+ +-----+ +-----------+-----+-----------------+
| ^
+------------------------------+
* Compilation environment will hold a reference to the function data
* Add basic documentation to the ABI trait
* Enable x86 and arm64 in cranelift-codegen
* Add reg_name function for x64
* Introduce the concept of a MacroAssembler and Assembler
This commit introduces the concept of a MacroAsesembler and
Assembler. The MacroAssembler trait will provide a high enough
interface across architectures so that each ISA implementation can use their own low-level
Assembler implementation to fulfill the interface. Each Assembler will
provide a 1-1 mapping to each ISA instruction.
As of this commit, only a partial debug implementation is provided for
the x64 Assembler.
* Add a newtype over PReg
Adds a newtype `Reg` over regalloc2::PReg; this ensures that Winch
will operate only on the concept of `Reg`. This change is temporary
until we have the necessary machinery to share a common Reg
abstraction via `cranelift_asm`
* Improvements to local calcuation
- Add `LocalSlot::addressed_from_sp`
- Use `u32` for local slot and local sizes calculation
* Add helper methods to ABIArg
Adds helper methods to retrieve register and type information from the argument
* Make locals_size public in frame
* Improve x64 register naming depending on size
* Add new methods to the masm interface
This commit introduces the ability for the MacroAssembler to reserve
stack space, get the address of a given local and perform a stack
store based on the concept of `Operand`s.
There are several motivating factors to introduce the concept of an
Operand:
- Make the translation between Winch and Cranelift easier;
- Make dispatching from the MacroAssembler to the underlying Assembler
- easier by minimizing the amount of functions that we need to define
- in order to satisfy the store/load combinations
This commit also introduces the concept of a memory address, which
essentially describes the addressing modes; as of this commit only one
addressing mode is supported. We'll also need to verify that this
structure will play nicely with arm64.
* Blank masm implementation for arm64
* Implementation of reserve_stack, local_address, store and fp_offset
for x64
* Implement function prologue and argument register spilling
* Add structopt and wat
* Fix debug instruction formatting
* Make TargetISA trait publicly accessible
* Modify the MacroAssembler finalize siganture to return a slice of strings
* Introduce a simple CLI for Winch
To be able to compile Wasm programs with Winch independently. Mostly
meant for testing / debugging
* Fix bug in x64 assembler mov_rm
* Remove unused import
* Move the stack slot calculation to the Frame
This commit moves the calculation of the stack slots to the frame
handler abstraction and also includes the calculation of the limits
for the function defined locals, which will be used to zero the locals
that are not associated to function arguments
* Add i32 and i64 constructors to local slots
* Introduce the concept of DefinedLocalsRange
This commit introduces `DefinedLocalsRange` to track the stack offset
at which the function-defined locals start and end; this is later used
to zero-out that stack region
* Add constructors for int and float registers
* Add a placeholder stack implementation
* Add a regset abstraction to track register availability
Adds a bit set abstraction to track register availability for register
allocation.
The bit set has no specific knowledge about physical registers, it
works on the register's hardware encoding as the source of truth.
Each RegSet is expected to be created with the universe of allocatable
registers per ISA when starting the compilation of a particular function.
* Add an abstraction over register and immediate
This is meant to be used as the source for stores.
* Add a way to zero local slots and an initial skeletion of regalloc
This commit introduces `zero_local_slots` to the MacroAssembler; which
ensures that function defined locals are zeroed out when starting the
function body.
The algorithm divides the defined function locals stack range
into 8 byte slots and stores a zero at each address. This process
relies on register allocation if the amount of slots that need to be
initialized is greater than 1. In such case, the next available
register is requested to the register set and it's used to store a 0,
which is then stored at every local slot
* Update to wasmparser 0.92
* Correctly track if the regset has registers available
* Add a result entry to the ABI signature
This commuit introduces ABIResult as part of the ABISignature;
this struct will track how function results are stored; initially it
will consiste of a single register that will be requested to the
register allocator at the end of the function; potentially causing a spill
* Move zero local slots and add more granular methods to the masm
This commit removes zeroing local slots from the MacroAssembler and
instead adds more granular methods to it (e.g `zero`, `add`).
This allows for better code sharing since most of the work done by the
algorithm for zeroing slots will be the same in all targets, except
for the binary emissions pieces, which is what gets delegated to the masm
* Use wasmparser's visitor API and add initial support for const and add
This commit adds initial support for the I32Const and I32
instructions; this involves adding a minimum for register
allocation. Note that some regalloc pieces are still incomplete, since
for the current set of supported instructions they are not needed.
* Make the ty field public in Local
* Add scratch_reg to the abi
* Add a method to get a particular local from the Frame
* Split the compilation environment abstraction
This commit splits the compilation environment into two more concise
abstractions:
1. CodeGen: the main abstraction for code generation
2. CodeGenContext: abstraction that shares the common pieces for
compilation; these pieces are shared between the code generator and
the register allocator
* Add `push` and `load` to the MacroAssembler
* Remove dead code warnings for unused paths
* Map ISA features to cranelift-codegen ISA features
* Apply formatting
* Fix Cargo.toml after a bad rebase
* Add component-compiler feature
* Use clap instead of structopt
* Add winch to publish.rs script
* Minor formatting
* Add tests to RegSet and fix two bugs when freeing and checking for
register availability
* Add tests to Stack
* Free source register after a non-constant i32 add
* Improve comments
- Remove unneeded comments
- And improve some of the TODO items
* Update default features
* Drop the ABI generic param and pass the word_size information directly
To avoid dealing with dead code warnings this commit passes the word
size information directly, since it's the only piece of information
needed from the ABI by Codegen until now
* Remove dead code
This piece of code will be put back once we start integrating Winch
with Wasmtime
* Remove unused enum variant
This variant doesn't get constructed; it should be added back once a
backend is added and not enabled by default or when Winch gets
integrated into Wasmtime
* Fix unused code in regset tests
* Update spec testsuite
* Switch the visitor pattern for a simpler operator match
This commit removes the usage of wasmparser's visitor pattern and
instead defaults to a simpler operator matching approach. This removes
the complexity of having to define all the visitor trait functions at once.
* Use wasmparser's Visitor trait with a different macro strategy
This commit puts back wasmparser's Visitor trait, with a sigle;
simpler macro, only used for unsupported operators.
* Restructure Winch
This commit restuructures Winch's parts. It divides the initial
approach into three main crates: `winch-codegen`,`wasmtime-winch` and `winch-tools`.
`wasmtime-winch` is reponsible for the Wasmtime-Winch integration.
`winch-codegen` is solely responsible for code generation.
`winch-tools` is CLI tool to compile Wasm programs, mainly for testing purposes.
* Refactor zero local slots
This commit moves the logic of zeroing local slots from the codegen
module into a method with a default implementation in the
MacroAssembler trait: `zero_mem_range`.
The refactored implementation is very similar to the previous
implementation with the only difference
that it doesn't allocates a general-purpose register; it instead uses
the register allocator to retrieve the scratch register and uses this
register to unroll the series of zero stores.
* Tie the codegen creation to the ISA ABI
This commit makes the relationship between the ISA ABI and the codegen
explicit. This allows us to pass down ABI-specific bit and pieces to
the codegeneration. In this case the only concrete piece that we need
is the ABI word size.
* Mark winch as publishable directory
* Revamp winch docs
This commit ensures that all the code comments in Winch are compliant
with the syle used in the rest of Wasmtime's codebase.
It also imptoves, generally the quality of the comments in some modules.
* Panic when using multi-value when the target is aarch64
Similar to x64, this commit ensures that the abi signature of the
current function doesn't use multi-value returns
* Document the usage of directives
* Use endianness instead of endianess in the ISA trait
* Introduce a three-argument form in the MacroAssembler
This commit introduces the usage of three-argument form for the
MacroAssembler interface. This allows for a natural mapping for
architectures like aarch64. In the case of x64, the implementation can
simply restrict the implementation asserting for equality in two of
the arguments of defaulting to a differnt set of instructions.
As of this commit, the implementation of `add` panics if the
destination and the first source arguments are not equal; internally
the x64 assembler implementation will ensure that all the allowed
combinations of `add` are satisfied. The reason for panicking and not
emitting a `mov` followed by an `add` for example is simply because register
allocation happens right before calling `add`, which ensures any
register-to-register moves, if needed.
This implementation will evolve in the future and this panic will be
lifted if needed.
* Improve the documentation for the MacroAssembler.
Documents the usage of three-arg form and the intention around the
high-level interface.
* Format comments in remaining modules
* Clean up Cargo.toml for winch pieces
This commit adds missing fields to each of Winch's Cargo.toml.
* Use `ModuleTranslation::get_types()` to derive the function type
* Assert that start range is always word-size aligned
* Make send and remove wrapper around WasiNnCtx·
This removes the wrapper around WasiNnCtx and no longer requires borrow_mut(). Once send/sync
changes in OpenVINO crate are merged in it will allow·use by frameworks that requires this trait.
* Bump openvino to compatible version.
* BackendExecutionContext should be Send and Sync
* Fix rust format issues.
* Update Cargo.lock for openvino
* Audit changes to openvino crates.
* wiggle: no longer need to guard wasmtime integration behind a feature
this existed so we could use wiggle in lucet, but lucet is long EOL
* replace wiggle::Trap with wiggle::wasmtime_crate::Trap
* wiggle tests: unwrap traps because we cant assert_eq on them
* wasi-common: emit a wasmtime::Trap instead of a wiggle::Trap
formally add a dependency on wasmtime here to make it obvious, though
we do now have a transitive one via wiggle no matter what (and therefore
can get rid of the default-features=false on the wiggle dep)
* wasi-nn: use wasmtime::Trap instead of wiggle::Trap
there's no way the implementation of this func is actually
a good idea, it will panic the host process on any error,
but I'll ask @mtr to fix that
* wiggle test-helpers examples: fixes
* wasi-common cant cross compile to wasm32-unknown-emscripten anymore
this was originally for the WASI polyfill for web targets. Those days
are way behind us now.
* wasmtime wont compile for armv7-unknown-linux-gnueabihf either
Using rayon adds a lot of dependencies to Cranelift. The total
unparallelized time the code that uses rayon takes is less than half a
second and it runs at compile time, so there is pretty much no benefit
to parallelizing it.
* cranelift: Add FlushInstructionCache for AArch64 on Windows
This was previously done on #3426 for linux.
* wasmtime: Add FlushInstructionCache for AArch64 on Windows
This was previously done on #3426 for linux.
* cranelift: Add MemoryUse flag to JIT Memory Manager
This allows us to keep the icache flushing code self-contained and not leak implementation details.
This also changes the windows icache flushing code to only flush pages that were previously unflushed.
* Add jit-icache-coherence crate
* cranelift: Use `jit-icache-coherence`
* wasmtime: Use `jit-icache-coherence`
* jit-icache-coherence: Make rustix feature additive
Mutually exclusive features cause issues.
* wasmtime: Remove rustix from wasmtime-jit
We now use it via jit-icache-coherence
* Rename wasmtime-jit-icache-coherency crate
* Use cfg-if in wasmtime-jit-icache-coherency crate
* Use inline instead of inline(always)
* Add unsafe marker to clear_cache
* Conditionally compile all rustix operations
membarrier does not exist on MacOS
* Publish `wasmtime-jit-icache-coherence`
* Remove explicit windows check
This is implied by the target_os = "windows" above
* cranelift: Remove len != 0 check
This is redundant as it is done in non_protected_allocations_iter
* Comment cleanups
Thanks @akirilov-arm!
* Make clear_cache safe
* Rename pipeline_flush to pipeline_flush_mt
* Revert "Make clear_cache safe"
This reverts commit 21165d81c9.
* More docs!
* Fix pipeline_flush reference on clear_cache
* Update more docs!
* Move pipeline flush after `mprotect` calls
Technically the `clear_cache` operation is a lie in AArch64, so move the pipeline flush after the `mprotect` calls so that it benefits from the implicit cache cleaning done by it.
* wasmtime: Remove rustix backend from icache crate
* wasmtime: Use libc for macos
* wasmtime: Flush icache on all arch's for windows
* wasmtime: Add flags to membarrier call
* egraph-based midend: draw the rest of the owl.
* Rename `egg` submodule of cranelift-codegen to `egraph`.
* Apply some feedback from @jsharp during code walkthrough.
* Remove recursion from find_best_node by doing a single pass.
Rather than recursively computing the lowest-cost node for a given
eclass and memoizing the answer at each eclass node, we can do a single
forward pass; because every eclass node refers only to earlier nodes,
this is sufficient. The behavior may slightly differ from the earlier
behavior because we cannot short-circuit costs to zero once a node is
elaborated; but in practice this should not matter.
* Make elaboration non-recursive.
Use an explicit stack instead (with `ElabStackEntry` entries,
alongside a result stack).
* Make elaboration traversal of the domtree non-recursive/stack-safe.
* Work analysis logic in Cranelift-side egraph glue into a general analysis framework in cranelift-egraph.
* Apply static recursion limit to rule application.
* Fix aarch64 wrt dynamic-vector support -- broken rebase.
* Topo-sort cranelift-egraph before cranelift-codegen in publish script, like the comment instructs me to!
* Fix multi-result call testcase.
* Include `cranelift-egraph` in `PUBLISHED_CRATES`.
* Fix atomic_rmw: not really a load.
* Remove now-unnecessary PartialOrd/Ord derivations.
* Address some code-review comments.
* Review feedback.
* Review feedback.
* No overlap in mid-end rules, because we are defining a multi-constructor.
* rustfmt
* Review feedback.
* Review feedback.
* Review feedback.
* Review feedback.
* Remove redundant `mut`.
* Add comment noting what rules can do.
* Review feedback.
* Clarify comment wording.
* Update `has_memory_fence_semantics`.
* Apply @jameysharp's improved loop-level computation.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion commit.
* Fix off-by-one in new loop-nest analysis.
* Review feedback.
* Review feedback.
* Review feedback.
* Use `Default`, not `std::default::Default`, as per @fitzgen
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Apply @fitzgen's comment elaboration to a doc-comment.
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Add stat for hitting the rewrite-depth limit.
* Some code motion in split prelude to make the diff a little clearer wrt `main`.
* Take @jameysharp's suggested `try_into()` usage for blockparam indices.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Take @jameysharp's suggestion to avoid double-match on load op.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion (add import).
* Review feedback.
* Fix stack_load handling.
* Remove redundant can_store case.
* Take @jameysharp's suggested improvement to FuncEGraph::build() logic
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Tweaks to FuncEGraph::build() on top of suggestion.
* Take @jameysharp's suggested clarified condition
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Clean up after suggestion (unused variable).
* Fix loop analysis.
* loop level asserts
* Revert constant-space loop analysis -- edge cases were incorrect, so let's go with the simple thing for now.
* Take @jameysharp's suggestion re: result_tys
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix up after suggestion
* Take @jameysharp's suggestion to use fold rather than reduce
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fixup after suggestion
* Take @jameysharp's suggestion to remove elaborate_eclass_use's return value.
* Clarifying comment in terminator insts.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
A minor update of a few other crates drops `semver` and `rustc_version`
from `Cargo.lock`. I've audited the deltas in versions for the other
crates here as well and they all look good.
* Update wasm-tools dependencies
This update brings in a number of features such as:
* The component model binary format and AST has been slightly adjusted
in a few locations. Names are dropped from parameters/results now in
the internal representation since they were not used anyway. At this
time the ability to bind a multi-return function has not been exposed.
* The `wasmparser` validator pass will now share allocations with prior
functions, providing what's probably a very minor speedup for Wasmtime
itself.
* The text format for many component-related tests now requires named
parameters.
* Some new relaxed-simd instructions are updated to be ignored.
I hope to have a follow-up to expose the multi-return ability to the
embedding API of components.
* Update audit information for new crates
* Leverage Cargo's workspace inheritance feature
This commit is an attempt to reduce the complexity of the Cargo
manifests in this repository with Cargo's workspace-inheritance feature
becoming stable in Rust 1.64.0. This feature allows specifying fields in
the root workspace `Cargo.toml` which are then reused throughout the
workspace. For example this PR shares definitions such as:
* All of the Wasmtime-family of crates now use `version.workspace =
true` to have a single location which defines the version number.
* All crates use `edition.workspace = true` to have one default edition
for the entire workspace.
* Common dependencies are listed in `[workspace.dependencies]` to avoid
typing the same version number in a lot of different places (e.g. the
`wasmparser = "0.89.0"` is now in just one spot.
Currently the workspace-inheritance feature doesn't allow having two
different versions to inherit, so all of the Cranelift-family of crates
still manually specify their version. The inter-crate dependencies,
however, are shared amongst the root workspace.
This feature can be seen as a method of "preprocessing" of sorts for
Cargo manifests. This will help us develop Wasmtime but shouldn't have
any actual impact on the published artifacts -- everything's dependency
lists are still the same.
* Fix wasi-crypto tests
`tracing` crate is already used within the codebase, this change allows
developers to benefit from that functionality when running and debugging
tests
Signed-off-by: Roman Volosatovs <rvolosatovs@riseup.net>
Signed-off-by: Roman Volosatovs <rvolosatovs@riseup.net>
* Upgrade to regalloc2 0.4.1.
Incorporates bytecodealliance/regalloc2#85, which fixes a fuzzbug
related to constraints and liverange splits.
* Add audit of regalloc2 upgrade.
* Update to cap-std 0.26.
This is primarily to pull in bytecodealliance/cap-std#271, the fix for #4936,
compilation on Rust nightly on Windows.
It also updates to rustix 0.35.10, to pull in bytecodealliance/rustix#403,
the fix for bytecodealliance/rustix#402, compilation on newer versions of
the libc crate, which changed a public function from `unsafe` to safe.
Fixes#4936.
* Update the system-interface audit for 0.23.
* Update the libc supply-chain config version.
* Cranelift: use regalloc2 constraints on caller side of ABI code.
This PR updates the shared ABI code and backends to use register-operand
constraints rather than explicit pinned-vreg moves for register
arguments and return values.
The s390x backend was not updated, because it has its own implementation
of ABI code. Ideally we could converge back to the code shared by x64
and aarch64 (which didn't exist when s390x ported calls to ISLE, so the
current situation is underestandable, to be clear!). I'll leave this for
future work.
This PR exposed several places where regalloc2 needed to be a bit more
flexible with constraints; it requires regalloc2#74 to be merged and
pulled in.
* Update to regalloc2 0.3.3.
In addition to version bump, this required removing two asserts as
`SpillSlot`s no longer carry their class (so we can't assert that they
have the correct class).
* Review comments.
* Filetest updates.
* Add cargo-vet audit for regalloc2 0.3.2 -> 0.3.3 upgrade.
* Update to regalloc2 0.4.0.
* Optimize the WASI `random_get` implementation.
Use `StdRng` instead of the `OsRng` in the default implementation of
`random_get`. This uses a userspace CSPRNG, making `random_get` 3x faster
in simple benchmarks.
* Update cargo-vet audits for cap-std 0.25.3.
* Update all cap-std packages to 0.25.3.
This commit replaces #4869 and represents the actual version bump that
should have happened had I remembered to bump the in-tree version of
Wasmtime to 1.0.0 prior to the branch-cut date. Alas!
We were previously implicitly assuming that all Wasm frames in a stack used the
same `VMRuntimeLimits` as the previous frame we walked, but this is not true
when Wasm in store A calls into the host which then calls into Wasm in store B:
| ... |
| Host | |
+-----------------+ | stack
| Wasm in store A | | grows
+-----------------+ | down
| Host | |
+-----------------+ |
| Wasm in store B | V
+-----------------+
Trying to walk this stack would previously result in a runtime panic.
The solution is to push the maintenance of our list of saved Wasm FP/SP/PC
registers that allow us to identify contiguous regions of Wasm frames on the
stack deeper into `CallThreadState`. The saved registers list is now maintained
whenever updating the `CallThreadState` linked list by making the
`CallThreadState::prev` field private and only accessible via a getter and
setter, where the setter always maintains our invariants.
* Implement the remaining socket-related WASI functions.
The original WASI specification included `sock_read`, `sock_write`, and
`shutdown`. Now that we have some sockets support, implement these
additional functions, to make it easier for people porting existing code
to WASI.
It's expected that this will all be subsumed by the wasi-sockets
proposal, but for now, this is a relatively small change which should
hopefully unblock people trying to use the current `accept` support.
* Update to system-interface 0.22, which has fixes for Windows.
* Upgrade wasm-tools crates, namely the component model
This commit pulls in the latest versions of all of the `wasm-tools`
family of crates. There were two major changes that happened in
`wasm-tools` in the meantime:
* bytecodealliance/wasm-tools#697 - this commit introduced a new API for
more efficiently reading binary operators from a wasm binary. The old
`Operator`-based reading was left in place, however, and continues to
be what Wasmtime uses. I hope to update Wasmtime in a future PR to use
this new API, but for now the biggest change is...
* bytecodealliance/wasm-tools#703 - this commit was a major update to
the component model AST. This commit almost entirely deals with the
fallout of this change.
The changes made to the component model were:
1. The `unit` type no longer exists. This was generally a simple change
where the `Unit` case in a few different locations were all removed.
2. The `expected` type was renamed to `result`. This similarly was
relatively lightweight and mostly just a renaming on the surface. I
took this opportunity to rename `val::Result` to `val::ResultVal` and
`types::Result` to `types::ResultType` to avoid clashing with the
standard library types. The `Option`-based types were handled with
this as well.
3. The payload type of `variant` and `result` types are now optional.
This affected many locations that calculate flat type
representations, ABI information, etc. The `#[derive(ComponentType)]`
macro now specifically handles Rust-defined `enum` types which have
no payload to the equivalent in the component model.
4. Functions can now return multiple parameters. This changed the
signature of invoking component functions because the return value is
now bound by `ComponentNamedList` (renamed from `ComponentParams`).
This had a large effect in the tests, fuzz test case generation, etc.
5. Function types with 2-or-more parameters/results must uniquely name
all parameters/results. This mostly affected the text format used
throughout the tests.
I haven't added specifically new tests for multi-return but I changed a
number of tests to use it. Additionally I've updated the fuzzers to all
exercise multi-return as well so I think we should get some good
coverage with that.
* Update version numbers
* Use crates.io
* Cranelift: Use bump allocation in `remove_constant_phis` pass
This makes compilation 2-6% faster for Sightglass's bz2 benchmark:
```
compilation :: cycles :: benchmarks/bz2/benchmark.wasm
Δ = 7290648.36 ± 4245152.07 (confidence = 99%)
bump.so is 1.02x to 1.06x faster than main.so!
[166388177 183238542.98 214732518] bump.so
[172836648 190529191.34 217514271] main.so
compilation :: cycles :: benchmarks/pulldown-cmark/benchmark.wasm
No difference in performance.
[182220055 225793551.12 277857575] bump.so
[193212613 227784078.61 277175335] main.so
compilation :: cycles :: benchmarks/spidermonkey/benchmark.wasm
No difference in performance.
[3848442474 4295214144.37 4665127241] bump.so
[3969505457 4262415290.10 4563869974] main.so
```
* Add audit for `bumpalo`
* Add an audit of `arrayvec` version 0.7.2
* Remove unnecessary `collect` into `Vec`
I wasn't able to measure any perf difference here, but its nice to do anyways.
* Use a `SecondaryMap` for keeping track of summaries
Alex Crichton
Trevor Elliott
Chris Fallin
wasmtime-publish
Dan Gohman
Jamey Sharp
Harald Hoyer
Robin Freyler
May B
Nick Fitzgerald
Saúl Cabrera
Matthew Tamayo-Rios
Pat Hickey
bjorn3
Afonso Bordado
Benjamin Bouvier
Roman Volosatovs