This instruction has a single instruction lowering in AVX512F/VL and a three instruction lowering in AVX but neither is currently supported in the x64 backend. To implement this, we instead subtract the vector from 0 and use a blending instruction to pick the lanes containing the absolute value.
* Update wasm-tools crates
* Update Wasm SIMD spec tests
* Invert 'experimental_x64_should_panic' logic
By doing this, it is easier to see which spec tests currently panic. The new tests correspond to recently-added instructions.
* Fix: ignore new spec tests for all backends
There are occasional timeouts in type checking where Z3 hangs. This is a known
issue[0] with the implementation of type checking in Peepmatic, and getting
these timeouts in the fuzzers is just annoying and adds noise to our fuzzing
results. When we fix [0] we can reintroduce these fuzz targets.
[0]: https://github.com/bytecodealliance/wasmtime/issues/2695
* Implement support for `async` functions in Wasmtime
This is an implementation of [RFC 2] in Wasmtime which is to support
`async`-defined host functions. At a high level support is added by
executing WebAssembly code that might invoke an asynchronous host
function on a separate native stack. When the host function's future is
not ready we switch back to the main native stack to continue execution.
There's a whole bunch of details in this commit, and it's a bit much to
go over them all here in this commit message. The most important changes
here are:
* A new `wasmtime-fiber` crate has been written to manage the low-level
details of stack-switching. Unixes use `mmap` to allocate a stack and
Windows uses the native fibers implementation. We'll surely want to
refactor this to move stack allocation elsewhere in the future. Fibers
are intended to be relatively general with a lot of type paremters to
fling values back and forth across suspension points. The whole crate
is a giant wad of `unsafe` unfortunately and involves handwritten
assembly with custom dwarf CFI directives to boot. Definitely deserves
a close eye in review!
* The `Store` type has two new methods -- `block_on` and `on_fiber`
which bridge between the async and non-async worlds. Lots of unsafe
fiddly bits here as we're trying to communicate context pointers
between disparate portions of the code. Extra eyes and care in review
is greatly appreciated.
* The APIs for binding `async` functions are unfortunately pretty ugly
in `Func`. This is mostly due to language limitations and compiler
bugs (I believe) in Rust. Instead of `Func::wrap` we have a
`Func::wrapN_async` family of methods, and we've also got a whole
bunch of `Func::getN_async` methods now too. It may be worth
rethinking the API of `Func` to try to make the documentation page
actually grok'able.
This isn't super heavily tested but the various test should suffice for
engaging hopefully nearly all the infrastructure in one form or another.
This is just the start though!
[RFC 2]: https://github.com/bytecodealliance/rfcs/pull/2
* Add wasmtime-fiber to publish script
* Save vector/float registers on ARM too.
* Fix a typo
* Update lock file
* Implement periodically yielding with fuel consumption
This commit implements APIs on `Store` to periodically yield execution
of futures through the consumption of fuel. When fuel runs out a
future's execution is yielded back to the caller, and then upon
resumption fuel is re-injected. The goal of this is to allow cooperative
multi-tasking with futures.
* Fix compile without async
* Save/restore the frame pointer in fiber switching
Turns out this is another caller-saved register!
* Simplify x86_64 fiber asm
Take a leaf out of aarch64's playbook and don't have extra memory to
load/store these arguments, instead leverage how `wasmtime_fiber_switch`
already loads a bunch of data into registers which we can then
immediately start using on a fiber's start without any extra memory
accesses.
* Add x86 support to wasmtime-fiber
* Add ARM32 support to fiber crate
* Make fiber build file probing more flexible
* Use CreateFiberEx on Windows
* Remove a stray no-longer-used trait declaration
* Don't reach into `Caller` internals
* Tweak async fuel to eventually run out.
With fuel it's probably best to not provide any way to inject infinite
fuel.
* Fix some typos
* Cleanup asm a bit
* Use a shared header file to deduplicate some directives
* Guarantee hidden visibility for functions
* Enable gc-sections on macOS x86_64
* Add `.type` annotations for ARM
* Update lock file
* Fix compile error
* Review comments
Add a bunch of test vectors that actually expose this (previously the
shift-by-zero test had equal lower and upper halves and hid the bug),
including the most basic of all, 1 << 0 == 1 (thanks @bjorn3 for finding
this).
If an instruction has more than one trap record associated with it (for
example: a divide instruction that has participated in load-op fusion,
so we have both a heap-out-of-bounds trap record due to its load and a
divide-by-zero trap record due to its divide op), the current MachBuffer
code would emit only one of the trap records to the sink.
Separately, divide instructions probably shouldn't merge loads, because
the two separate possible traps at one location might be confusing for
some embedders (certainly in Lucet). Divide seems to be the only case in
our current codegen where such merging might occur. This PR changes the
lowering to always force the divisor into a register.
Finally, while working out why trap records were not appearing, I had
noticed that `isa::x64::emit_std_enc_mem()` was only emitting heap-OOB
trap metadata for loads/stores when it had a srcloc. This PR ensures
that the metadata is emitted even when the srcloc is empty.
Note that none of the above presents a security or correctness problem;
trap metadata only affects the status that we return to the embedder
when a Wasm program terminates with a trap.
When a block is unreachable, the `unreachable_code` pass will remove it,
which is perfectly sensible. Jump tables factor into unreachability in
an expected way: even if a block is listed in a jump table, the block
might be unreachable if the jump table itself is unused (or used in an
unreachable block). Unfortunately, the verifier still expects all
block refs in all jump tables to be valid, even after DCE, which will
not always be the case.
This makes a simple change to the pass: after removing blocks, it scans
jump tables. Any jump table that refers to an unreachable block must
itself be unused, and so we just clear its entries. We do not bother
removing it (and renumbering all later jumptables), and we do not bother
computing full unused-ness of all jumptables, as that would be more
expensive; it's sufficient to clear out the ones that refer to
unreachable blocks, which are a subset of all unused jumptables.
Fixes#2670.
This fixes#2672 and #2679, and also fixes an incorrect instruction
emission (`test` with small immediate) that we had missed earlier.
The shift-related fixes have to do with (i) shifts by 0 bits, as a
special case that must be handled; and (ii) shifts by a 128-bit amount,
which we can handle by just dropping the upper half (we only use 3--7
bits of shift amount).
This adjusts the lowerings appropriately, and also adds run-tests to
ensure that the lowerings actually execute correctly (previously we only
had compile-tests with golden lowerings; I'd like to correct this for
more ops eventually, adding run-tests beyond what the Wasm spec and
frontend covers).
* Fix preservation of the sigaltstack on macOS
This commit fixes an issue discovered in the wasmtime-go bindings when
the Go runtime was crashing on macOS only when running wasm code that
trapped. It turns out that our switch to `siglongjmp` from `longjmp`
actually broke macOS! This breakage happens because all subsequent
signals after the first signal are all delivered on the main stack, not
the sigaltstack, even if the sigaltstack is configured. This causes the
Go runtime to crash since it expects to run on the sigaltstack.
The fix in this commit is to actually return from the signal handler to
trigger the kernel's updating of the sigaltstack no longer being in use.
Before we return, however, we configure the register context to return
to to call some custom code which immediately does the unwind we would
otherwise have done. This works around the issue on macOS hopefully
without adding too many portability problems. Ideally this will all go
away as well with #2632 as well.
* Fix compile warning
This adds the ability to add feature flags (e.g. `--features wasi-nn`) when compiling `wasmtime-bench-api` to allow benchmarking Wasmtime with WASI proposals included. Note that due to https://github.com/rust-lang/cargo/issues/5364, these features are only available:
- in the `crates/bench-api` directory, e.g. `pushd crates/bench-api; cargo build --features wasi-crypto`
- or from the top-level project directory using `-Zpackage-features`, e.g. `OPENVINO_INSTALL_DIR=/opt/intel/openvino cargo +nightly build -p wasmtime-bench-api -Zpackage-features --features wasi-nn`
* Don't use HTML comments, as they are noisy, which makes the templates more
intimidating.
* Use "TODO" to clearly demarcate everywhere the issue reporter should fill in
some information.
* Use headers and white space abundantly, which makes it easier to visually
process the template and its sections at a glance, and less of an intimidating
wall of text.
Fixes#2661
This commit updates to the 0.9 version of the witx crate implemented in
WebAssembly/wasi#395. This new version drastically changes code
generation and how we interface with the crate. The intention is to
abstract the code generation aspects and allow code generators to
implement much more low-level instructions to enable more flexible APIs
in the future. Additionally a bunch of `*.witx` files were updated in
the WASI repository.
It's worth pointing out, however, that `wasi-common` does not change as
a result of this change. The shape of the APIs that we need to implement
are effectively the same and the only difference is that the shim
functions generated by wiggle are a bit different.
This updates the publication script we have for crates to ensure that
the `wasmtime-publish` GitHub team is added to all crates published.
This will fail for most publications because the team is already listed,
but the hope is that whomever is publishing can see the logs and catch
anything that looks awry.
Dan Gohman
Andrew Brown
Nick Fitzgerald
Ivan Enderlin
Chris Fallin
Alex Crichton
Arjun P
Pat Hickey
Pat Hickey
bjorn3
Max de Danschutter