Implement Wasmtime's new API as designed by RFC 11. This is quite a large commit which has had lots of discussion externally, so for more information it's best to read the RFC thread and the PR thread.
* wasmtime-wasi: re-exporting this WasiCtxBuilder was shadowing the right one
wasi-common's WasiCtxBuilder is really only useful wasi_cap_std_sync and
wasi_tokio to implement their own Builder on top of.
This re-export of wasi-common's is 1. not useful and 2. shadow's the
re-export of the right one in sync::*.
* wasi-common: eliminate WasiCtxBuilder, make the builder methods on WasiCtx instead
* delete wasi-common::WasiCtxBuilder altogether
just put those methods directly on &mut WasiCtx.
As a bonus, the sync and tokio WasiCtxBuilder::build functions
are no longer fallible!
* bench fixes
* more test fixes
* Redo the statically typed `Func` API
This commit reimplements the `Func` API with respect to statically typed
dispatch. Previously `Func` had a `getN` and `getN_async` family of
methods which were implemented for 0 to 16 parameters. The return value
of these functions was an `impl Fn(..)` closure with the appropriate
parameters and return values.
There are a number of downsides with this approach that have become
apparent over time:
* The addition of `*_async` doubled the API surface area (which is quite
large here due to one-method-per-number-of-parameters).
* The [documentation of `Func`][old-docs] are quite verbose and feel
"polluted" with all these getters, making it harder to understand the
other methods that can be used to interact with a `Func`.
* These methods unconditionally pay the cost of returning an owned `impl
Fn` with a `'static` lifetime. While cheap, this is still paying the
cost for cloning the `Store` effectively and moving data into the
closed-over environment.
* Storage of the return value into a struct, for example, always
requires `Box`-ing the returned closure since it otherwise cannot be
named.
* Recently I had the desire to implement an "unchecked" path for
invoking wasm where you unsafely assert the type signature of a wasm
function. Doing this with today's scheme would require doubling
(again) the API surface area for both async and synchronous calls,
further polluting the documentation.
The main benefit of the previous scheme is that by returning a `impl Fn`
it was quite easy and ergonomic to actually invoke the function. In
practice, though, examples would often have something akin to
`.get0::<()>()?()?` which is a lot of things to interpret all at once.
Note that `get0` means "0 parameters" yet a type parameter is passed.
There's also a double function invocation which looks like a lot of
characters all lined up in a row.
Overall, I think that the previous design is starting to show too many
cracks and deserves a rewrite. This commit is that rewrite.
The new design in this commit is to delete the `getN{,_async}` family of
functions and instead have a new API:
impl Func {
fn typed<P, R>(&self) -> Result<&Typed<P, R>>;
}
impl Typed<P, R> {
fn call(&self, params: P) -> Result<R, Trap>;
async fn call_async(&self, params: P) -> Result<R, Trap>;
}
This should entirely replace the current scheme, albeit by slightly
losing ergonomics use cases. The idea behind the API is that the
existence of `Typed<P, R>` is a "proof" that the underlying function
takes `P` and returns `R`. The `Func::typed` method peforms a runtime
type-check to ensure that types all match up, and if successful you get
a `Typed` value. Otherwise an error is returned.
Once you have a `Typed` then, like `Func`, you can either `call` or
`call_async`. The difference with a `Typed`, however, is that the
params/results are statically known and hence these calls can be much
more efficient.
This is a much smaller API surface area from before and should greatly
simplify the `Func` documentation. There's still a problem where
`Func::wrapN_async` produces a lot of functions to document, but that's
now the sole offender. It's a nice benefit that the
statically-typed-async verisons are now expressed with an `async`
function rather than a function-returning-a-future which makes it both
more efficient and easier to understand.
The type `P` and `R` are intended to either be bare types (e.g. `i32`)
or tuples of any length (including 0). At this time `R` is only allowed
to be `()` or a bare `i32`-style type because multi-value is not
supported with a native ABI (yet). The `P`, however, can be any size of
tuples of parameters. This is also where some ergonomics are lost
because instead of `f(1, 2)` you now have to write `f.call((1, 2))`
(note the double-parens). Similarly `f()` becomes `f.call(())`.
Overall I feel that this is a better tradeoff than before. While not
universally better due to the loss in ergonomics I feel that this design
is much more flexible in terms of what you can do with the return value
and also understanding the API surface area (just less to take in).
[old-docs]: https://docs.rs/wasmtime/0.24.0/wasmtime/struct.Func.html#method.get0
* Rename Typed to TypedFunc
* Implement multi-value returns through `Func::typed`
* Fix examples in docs
* Fix some more errors
* More test fixes
* Rebasing and adding `get_typed_func`
* Updating tests
* Fix typo
* More doc tweaks
* Tweak visibility on `Func::invoke`
* Fix tests again
* Implement defining host functions at the Config level.
This commit introduces defining host functions at the `Config` rather than with
`Func` tied to a `Store`.
The intention here is to enable a host to define all of the functions once
with a `Config` and then use a `Linker` (or directly with
`Store::get_host_func`) to use the functions when instantiating a module.
This should help improve the performance of use cases where a `Store` is
short-lived and redefining the functions at every module instantiation is a
noticeable performance hit.
This commit adds `add_to_config` to the code generation for Wasmtime's `Wasi`
type.
The new method adds the WASI functions to the given config as host functions.
This commit adds context functions to `Store`: `get` to get a context of a
particular type and `set` to set the context on the store.
For safety, `set` cannot replace an existing context value of the same type.
`Wasi::set_context` was added to set the WASI context for a `Store` when using
`Wasi::add_to_config`.
* Add `Config::define_host_func_async`.
* Make config "async" rather than store.
This commit moves the concept of "async-ness" to `Config` rather than `Store`.
Note: this is a breaking API change for anyone that's already adopted the new
async support in Wasmtime.
Now `Config::new_async` is used to create an "async" config and any `Store`
associated with that config is inherently "async".
This is needed for async shared host functions to have some sanity check during their
execution (async host functions, like "async" `Func`, need to be called with
the "async" variants).
* Update async function tests to smoke async shared host functions.
This commit updates the async function tests to also smoke the shared host
functions, plus `Func::wrap0_async`.
This also changes the "wrap async" method names on `Config` to
`wrap$N_host_func_async` to slightly better match what is on `Func`.
* Move the instance allocator into `Engine`.
This commit moves the instantiated instance allocator from `Config` into
`Engine`.
This makes certain settings in `Config` no longer order-dependent, which is how
`Config` should ideally be.
This also removes the confusing concept of the "default" instance allocator,
instead opting to construct the on-demand instance allocator when needed.
This does alter the semantics of the instance allocator as now each `Engine`
gets its own instance allocator rather than sharing a single one between all
engines created from a configuration.
* Make `Engine::new` return `Result`.
This is a breaking API change for anyone using `Engine::new`.
As creating the pooling instance allocator may fail (likely cause is not enough
memory for the provided limits), instead of panicking when creating an
`Engine`, `Engine::new` now returns a `Result`.
* Remove `Config::new_async`.
This commit removes `Config::new_async` in favor of treating "async support" as
any other setting on `Config`.
The setting is `Config::async_support`.
* Remove order dependency when defining async host functions in `Config`.
This commit removes the order dependency where async support must be enabled on
the `Config` prior to defining async host functions.
The check is now delayed to when an `Engine` is created from the config.
* Update WASI example to use shared `Wasi::add_to_config`.
This commit updates the WASI example to use `Wasi::add_to_config`.
As only a single store and instance are used in the example, it has no semantic
difference from the previous example, but the intention is to steer users
towards defining WASI on the config and only using `Wasi::add_to_linker` when
more explicit scoping of the WASI context is required.
* Update WebAssembly C API submodule to latest commit.
This commit updates the WebAssembly C API submodule (for `wasm.h`) to the
latest commit out of master.
This fixes the behavior of `wasm_name_new_from_string` such that it no longer
copies the null character into the name, which caused unexpected failures when
using the Wasmtime linker as imports wouldn't resolve when the null was
present.
Along with this change were breaking changes to `wasm_func_call`, the host
callback signatures, and `wasm_instance_new` to take a vector type instead of a
pointer to an unsized array.
As a result, Wasmtime language bindings based on the C API will need to be
updated once this change is pulled in.
Fixes#2211.
Fixes#2131.
* Update Doxygen comments for wasm.h changes.
* Moves CodeMemory, VMInterrupts and SignatureRegistry from Compiler
* CompiledModule holds CodeMemory and GdbJitImageRegistration
* Store keeps track of its JIT code
* Makes "jit_int.rs" stuff Send+Sync
* Adds the threads example.
* Reactor support.
This implements the new WASI ABI described here:
https://github.com/WebAssembly/WASI/blob/master/design/application-abi.md
It adds APIs to `Instance` and `Linker` with support for running
WASI programs, and also simplifies the process of instantiating
WASI API modules.
This currently only includes Rust API support.
* Add comments and fix a typo in a comment.
* Fix a rustdoc warning.
* Tidy an unneeded `mut`.
* Factor out instance initialization with `NewInstance`.
This also separates instantiation from initialization in a manner
similar to https://github.com/bytecodealliance/lucet/pull/506.
* Update fuzzing oracles for the API changes.
* Remove `wasi_linker` and clarify that Commands/Reactors aren't connected to WASI.
* Move Command/Reactor semantics into the Linker.
* C API support.
* Fix fuzzer build.
* Update usage syntax from "::" to "=".
* Remove `NewInstance` and `start()`.
* Elaborate on Commands and Reactors and add a spec link.
* Add more comments.
* Fix wat syntax.
* Fix wat.
* Use the `Debug` formatter to format an anyhow::Error.
* Fix wat.
* Compute instance exports on demand.
Instead having instances eagerly compute a Vec of Externs, and bumping
the refcount for each Extern, compute Externs on demand.
This also enables `Instance::get_export` to avoid doing a linear search.
This also means that the closure returned by `get0` and friends now
holds an `InstanceHandle` to dynamically hold the instance live rather
than being scoped to a lifetime.
* Compute module imports and exports on demand too.
And compute Extern::ty on demand too.
* Add a utility function for computing an ExternType.
* Add a utility function for looking up a function's signature.
* Add a utility function for computing the ValType of a Global.
* Rename wasmtime_environ::Export to EntityIndex.
This helps differentiate it from other Export types in the tree, and
describes what it is.
* Fix a typo in a comment.
* Simplify module imports and exports.
* Make `Instance::exports` return the export names.
This significantly simplifies the public API, as it's relatively common
to need the names, and this avoids the need to do a zip with
`Module::exports`.
This also changes `ImportType` and `ExportType` to have public members
instead of private members and accessors, as I find that simplifies the
usage particularly in cases where there are temporary instances.
* Remove `Instance::module`.
This doesn't quite remove `Instance`'s `module` member, it gets a step
closer.
* Use a InstanceHandle utility function.
* Don't consume self in the `Func::get*` methods.
Instead, just create a closure containing the instance handle and the
export for them to call.
* Use `ExactSizeIterator` to avoid needing separate `num_*` methods.
* Rename `Extern::func()` etc. to `into_func()` etc.
* Revise examples to avoid using `nth`.
* Add convenience methods to instance for getting specific extern types.
* Use the convenience functions in more tests and examples.
* Avoid cloning strings for `ImportType` and `ExportType`.
* Remove more obviated clone() calls.
* Simplify `Func`'s closure state.
* Make wasmtime::Export's fields private.
This makes them more consistent with ExportType.
* Fix compilation error.
* Make a lifetime parameter explicit, and use better lifetime names.
Instead of 'me, use 'instance and 'module to make it clear what the
lifetime is.
* More lifetime cleanups.
* Add Wasmtime-specific C API functions to return errors
This commit adds new `wasmtime_*` symbols to the C API, many of which
mirror the existing counterparts in the `wasm.h` header. These APIs are
enhanced in a number of respects:
* Detailed error information is now available through a
`wasmtime_error_t`. Currently this only exposes one function which is
to extract a string version of the error.
* There is a distinction now between traps and errors during
instantiation and function calling. Traps only happen if wasm traps,
and errors can happen for things like runtime type errors when
interacting with the API.
* APIs have improved safety with respect to embedders where the lengths
of arrays are now taken as explicit parameters rather than assumed
from other parameters.
* Handle trap updates
* Update C examples
* Fix memory.c compile on MSVC
* Update test assertions
* Refactor C slightly
* Bare-bones .NET update
* Remove bogus nul handling
* Add examples of linking and WASI
This commit adds two example programs, one for linking two modules
together and one for instantiating WASI. The linkage example
additionally uses WASI to get some meaningful output at this time.
cc #1272
* Add examples to the book as well
* More links!
* Ignore examples from rustdoc testsing
* More example updates
* More ignored
Alex Crichton
Pat Hickey
Pat Hickey
Peter Huene
Joshua Warner
Yury Delendik
Dan Gohman
Peter Huene