While bringing in no major updates for Wasmtime I've taken this
opportunity to list myself for `cargo vet` with wildcard audits of this
family of crates. That means I shouldn't need to further add any more
entries in the future for updating these crates and additionally any
other organizations using these audits will automatically be able to
have audits for version that I publish.
While here I also ran `cargo vet prune` which was able to remove a
number of our exemptions.
* Integrate experimental HTTP into wasmtime.
* Reset Cargo.lock
* Switch to bail!, plumb options partially.
* Implement timeouts.
* Remove generated files & wasm, add Makefile
* Remove generated code textfile
* Update crates/wasi-http/Cargo.toml
Co-authored-by: Eduardo de Moura Rodrigues <16357187+eduardomourar@users.noreply.github.com>
* Update crates/wasi-http/Cargo.toml
Co-authored-by: Eduardo de Moura Rodrigues <16357187+eduardomourar@users.noreply.github.com>
* Extract streams from request/response.
* Fix read for len < buffer length.
* Formatting.
* types impl: swap todos for traps
* streams_impl: idioms, and swap todos for traps
* component impl: idioms, swap all unwraps for traps, swap all todos for traps
* http impl: idiom
* Remove an unnecessary mut.
* Remove an unsupported function.
* Switch to the tokio runtime for the HTTP request.
* Add a rust example.
* Update to latest wit definition
* Remove example code.
* wip: start writing a http test...
* finish writing the outbound request example
havent executed it yet
* better debug output
* wasi-http: some stubs required for rust rewrite of the example
* add wasi_http tests to test-programs
* CI: run the http tests
* Fix some warnings.
* bump new deps to latest releases (#3)
* Add tests for wasi-http to test-programs (#2)
* wip: start writing a http test...
* finish writing the outbound request example
havent executed it yet
* better debug output
* wasi-http: some stubs required for rust rewrite of the example
* add wasi_http tests to test-programs
* CI: run the http tests
* bump new deps to latest releases
h2 0.3.16
http 0.2.9
mio 0.8.6
openssl 0.10.48
openssl-sys 0.9.83
tokio 1.26.0
---------
Co-authored-by: Brendan Burns <bburns@microsoft.com>
* Update crates/test-programs/tests/http_tests/runtime/wasi_http_tests.rs
* Update crates/test-programs/tests/http_tests/runtime/wasi_http_tests.rs
* Update crates/test-programs/tests/http_tests/runtime/wasi_http_tests.rs
* wasi-http: fix cargo.toml file and publish script to work together (#4)
unfortunately, the publish script doesn't use a proper toml parser (in
order to not have any dependencies), so the whitespace has to be the
trivial expected case.
then, add wasi-http to the list of crates to publish.
* Update crates/test-programs/build.rs
* Switch to rustls
* Cleanups.
* Merge switch to rustls.
* Formatting
* Remove libssl install
* Fix tests.
* Rename wasi-http -> wasmtime-wasi-http
* prtest:full
Conditionalize TLS on riscv64gc.
* prtest:full
Fix formatting, also disable tls on s390x
* prtest:full
Add a path parameter to wit-bindgen, remove symlink.
* prtest:full
Fix tests for places where SSL isn't supported.
* Update crates/wasi-http/Cargo.toml
---------
Co-authored-by: Eduardo de Moura Rodrigues <16357187+eduardomourar@users.noreply.github.com>
Co-authored-by: Pat Hickey <phickey@fastly.com>
Co-authored-by: Pat Hickey <pat@moreproductive.org>
* Adding in trampoline compiling method for ISA
* Adding support for indirect call to memory address
* Refactoring frame to externalize defined locals, so it removes WASM depedencies in trampoline case
* Adding initial version of trampoline for testing
* Refactoring trampoline to be re-used by other architectures
* Initial wiring for winch with wasmtime
* Add a Wasmtime CLI option to select `winch`
This is effectively an option to select the `Strategy` enumeration.
* Implement `Compiler::compile_function` for Winch
Hook this into the `TargetIsa::compile_function` hook as well. Currently
this doesn't take into account `Tunables`, but that's left as a TODO for
later.
* Filling out Winch append_code method
* Adding back in changes from previous branch
Most of these are a WIP. It's missing trampolines for x64, but a basic
one exists for aarch64. It's missing the handling of arguments that
exist on the stack.
It currently imports `cranelift_wasm::WasmFuncType` since it's what's
passed to the `Compiler` trait. It's a bit awkward to use in the
`winch_codegen` crate since it mostly operates on `wasmparser` types.
I've had to hack in a conversion to get things working. Long term, I'm
not sure it's wise to rely on this type but it seems like it's easier on
the Cranelift side when creating the stub IR.
* Small API changes to make integration easier
* Adding in new FuncEnv, only a stub for now
* Removing unneeded parts of the old PoC, and refactoring trampoline code
* Moving FuncEnv into a separate file
* More comments for trampolines
* Adding in winch integration tests for first pass
* Using new addressing method to fix stack pointer error
* Adding test for stack arguments
* Only run tests on x86 for now, it's more complete for winch
* Add in missing documentation after rebase
* Updating based on feedback in draft PR
* Fixing formatting on doc comment for argv register
* Running formatting
* Lock updates, and turning on winch feature flags during tests
* Updating configuration with comments to no longer gate Strategy enum
* Using the winch-environ FuncEnv, but it required changing the sig
* Proper comment formatting
* Removing wasmtime-winch from dev-dependencies, adding the winch feature makes this not necessary
* Update doc attr to include winch check
* Adding winch feature to doc generation, which seems to fix the feature error in CI
* Add the `component-model` feature to the cargo doc invocation in CI
To match the metadata used by the docs.rs invocation when building docs.
* Add a comment clarifying the usage of `component-model` for docs.rs
* Correctly order wasmtime-winch and winch-environ in the publish script
* Ensure x86 test dependencies are included in cfg(target_arch)
* Further constrain Winch tests to x86_64 _and_ unix
---------
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
Co-authored-by: Saúl Cabrera <saulecabrera@gmail.com>
This commit introduces the `winch-environ` crate. This crate's responsibility is
to provide a shared implementatation of the `winch_codegen::FuncEnv` trait,
which is Winch's function compilation environment, used to resolve module and
runtime specific information needed by the code generation, such as resolving
all the details about a callee in a WebAssembly module, or resolving specific
information from the `VMContext`.
As of this change, the implementation only includes the necessary pieces to
resolve a function callee in a WebAssembly module. The idea is to evolve the
`winch_codegen::FuncEnv` trait as we evolve Winch's code generation.
This implements Godbolt Compiler Explorer-like functionality for Wasmtime and
Cranelift. Given a Wasm module, it compiles the module to native code and then
writes a standalone HTML file that gives a split pane view between the WAT and
ASM disassemblies.
* Enable the native target by default in winch
Match cranelift-codegen's build script where if no architecture is
explicitly enabled then the host architecture is implicitly enabled.
* Refactor Cranelift's ISA builder to share more with Winch
This commit refactors the `Builder` type to have a type parameter
representing the finished ISA with Cranelift and Winch having their own
typedefs for `Builder` to represent their own builders. The intention is
to use this shared functionality to produce more shared code between the
two codegen backends.
* Moving compiler shared components to a separate crate
* Restore native flag inference in compiler building
This fixes an oversight from the previous commits to use
`cranelift-native` to infer flags for the native host when using default
settings with Wasmtime.
* Move `Compiler::page_size_align` into wasmtime-environ
The `cranelift-codegen` crate doesn't need this and winch wants the same
implementation, so shuffle it around so everyone has access to it.
* Fill out `Compiler::{flags, isa_flags}` for Winch
These are easy enough to plumb through with some shared code for
Wasmtime.
* Plumb the `is_branch_protection_enabled` flag for Winch
Just forwarding an isa-specific setting accessor.
* Moving executable creation to shared compiler crate
* Adding builder back in and removing from shared crate
* Refactoring the shared pieces for the `CompilerBuilder`
I decided to move a couple things around from Alex's initial changes.
Instead of having the shared builder do everything, I went back to
having each compiler have a distinct builder implementation. I
refactored most of the flag setting logic into a single shared location,
so we can still reduce the amount of code duplication.
With them being separate, we don't need to maintain things like
`LinkOpts` which Winch doesn't currently use. We also have an avenue to
error when certain flags are sent to Winch if we don't support them. I'm
hoping this will make things more maintainable as we build out Winch.
I'm still unsure about keeping everything shared in a single crate
(`cranelift_shared`). It's starting to feel like this crate is doing too
much, which makes it difficult to name. There does seem to be a need for
two distinct abstraction: creating the final executable and the handling
of shared/ISA flags when building the compiler. I could make them into
two separate crates, but there doesn't seem to be enough there yet to
justify it.
* Documentation updates, and renaming the finish method
* Adding back in a default temporarily to pass tests, and removing some unused imports
* Fixing winch tests with wrong method name
* Removing unused imports from codegen shared crate
* Apply documentation formatting updates
Co-authored-by: Saúl Cabrera <saulecabrera@gmail.com>
* Adding back in cranelift_native flag inferring
* Adding new shared crate to publish list
* Adding write feature to pass cargo check
---------
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
Co-authored-by: Saúl Cabrera <saulecabrera@gmail.com>
This notably updates `wasmparser` for updates to the relaxed-simd
proposal and an implementation of the function-references proposal.
Additionally there are some minor bug fixes being picked up for WIT and
the component model.
* wasi-threads: run test suite
This change enables the running of the wasi-threads [test suite]. It
relies on a Wasmtime CLI binary being available and runs all `*.wasm`
and `*.wat` files present in the test suite directory. The results of
each execution are compared against a JSON spec file with the same base
name as the WebAssembly module. The spec file defines the expected exit
code, e.g.
This commit does not yet build any `*.c` or `*.s` files from the test
suite. That could be done later, perhaps upstream; in the meantime, this
work is still valuable as it lays the foundation for running other WASI
tests from the in-progress [wasi-testsuite] which share the same JSON
spec infrastructure.
[test suite]: https://github.com/WebAssembly/wasi-threads/tree/main/test/testsuite
[wasi-testsuite]: https://github.com/WebAssembly/wasi-testsuite
* review: move testsuite to top-level tests
* fix: remove now-unnecessary wasi-threads test
* fix: update testsuite submodule name
* fix: ignore tests on Windows
prtest:full
* fix: `cfg_attr` syntax
prtest:full
This change adds a basic coredump generation after a WebAssembly trap
was entered. The coredump includes rudimentary stack / process debugging
information.
A new CLI argument is added to enable coredump generation:
```
wasmtime --coredump-on-trap=/path/to/coredump/file module.wasm
```
See ./docs/examples-coredump.md for a working example.
Refs https://github.com/bytecodealliance/wasmtime/issues/5732
This audit is needed for #5619. I'm going ahead and updating Cargo.toml
and Cargo.lock at the same time because no source code changes are
required for this update.
This change adds the `wasmtime-wasi-threads` crate as a default crate
for the CLI application. This is no change for embedders of Wasmtime:
they would still have to include `wasmtime-wasi-threads` manually.
Enabling the crate by default in the CLI application has several
benefits, e.g., that it is simpler to experiment with and that it will
be part of more test runs (and thus bugs can be discovered more
quickly). Users will still have to add
`--wasi-modules=experimental-wasi-threads` to enable wasi-threads on the
command line.
* Update world-selection in `bindgen!` macro
Inspired by bytecodealliance/wit-bindgen#494 specifying a world or
document to bindgen is now optional as it's inferred if there's only one
`default world` in a package's documents.
* Add cargo-vet entry
* Update wasm-tools crates
Pulls in a new component binary format which should hopefully be the
last update for awhile.
* Update cargo vet configuration
This commit includes a set of changes that add initial support for `wasi-threads` to Wasmtime:
* feat: remove mutability from the WasiCtx Table
This patch adds interior mutability to the WasiCtx Table and the Table elements.
Major pain points:
* `File` only needs `RwLock<cap_std::fs::File>` to implement
`File::set_fdflags()` on Windows, because of [1]
* Because `File` needs a `RwLock` and `RwLock*Guard` cannot
be hold across an `.await`, The `async` from
`async fn num_ready_bytes(&self)` had to be removed
* Because `File` needs a `RwLock` and `RwLock*Guard` cannot
be dereferenced in `pollable`, the signature of
`fn pollable(&self) -> Option<rustix::fd::BorrowedFd>`
changed to `fn pollable(&self) -> Option<Arc<dyn AsFd + '_>>`
[1] da238e324e/src/fs/fd_flags.rs (L210-L217)
* wasi-threads: add an initial implementation
This change is a first step toward implementing `wasi-threads` in
Wasmtime. We may find that it has some missing pieces, but the core
functionality is there: when `wasi::thread_spawn` is called by a running
WebAssembly module, a function named `wasi_thread_start` is found in the
module's exports and called in a new instance. The shared memory of the
original instance is reused in the new instance.
This new WASI proposal is in its early stages and details are still
being hashed out in the [spec] and [wasi-libc] repositories. Due to its
experimental state, the `wasi-threads` functionality is hidden behind
both a compile-time and runtime flag: one must build with `--features
wasi-threads` but also run the Wasmtime CLI with `--wasm-features
threads` and `--wasi-modules experimental-wasi-threads`. One can
experiment with `wasi-threads` by running:
```console
$ cargo run --features wasi-threads -- \
--wasm-features threads --wasi-modules experimental-wasi-threads \
<a threads-enabled module>
```
Threads-enabled Wasm modules are not yet easy to build. Hopefully this
is resolved soon, but in the meantime see the use of
`THREAD_MODEL=posix` in the [wasi-libc] repository for some clues on
what is necessary. Wiggle complicates things by requiring the Wasm
memory to be exported with a certain name and `wasi-threads` also
expects that memory to be imported; this build-time obstacle can be
overcome with the `--import-memory --export-memory` flags only available
in the latest Clang tree. Due to all of this, the included tests are
written directly in WAT--run these with:
```console
$ cargo test --features wasi-threads -p wasmtime-cli -- cli_tests
```
[spec]: https://github.com/WebAssembly/wasi-threads
[wasi-libc]: https://github.com/WebAssembly/wasi-libc
This change does not protect the WASI implementations themselves from
concurrent access. This is already complete in previous commits or left
for future commits in certain cases (e.g., wasi-nn).
* wasi-threads: factor out process exit logic
As is being discussed [elsewhere], either calling `proc_exit` or
trapping in any thread should halt execution of all threads. The
Wasmtime CLI already has logic for adapting a WebAssembly error code to
a code expected in each OS. This change factors out this logic to a new
function, `maybe_exit_on_error`, for use within the `wasi-threads`
implementation.
This will work reasonably well for CLI users of Wasmtime +
`wasi-threads`, but embedders will want something better in the future:
when a `wasi-threads` threads fails, they may not want their application
to exit. Handling this is tricky, because it will require cancelling the
threads spawned by the `wasi-threads` implementation, something that is
not trivial to do in Rust. With this change, we defer that work until
later in order to provide a working implementation of `wasi-threads` for
experimentation.
[elsewhere]: https://github.com/WebAssembly/wasi-threads/pull/17
* review: work around `fd_fdstat_set_flags`
In order to make progress with wasi-threads, this change temporarily
works around limitations induced by `wasi-common`'s
`fd_fdstat_set_flags` to allow `&mut self` use in the implementation.
Eventual resolution is tracked in
https://github.com/bytecodealliance/wasmtime/issues/5643. This change
makes several related helper functions (e.g., `set_fdflags`) take `&mut
self` as well.
* test: use `wait`/`notify` to improve `threads.wat` test
Previously, the test simply executed in a loop for some hardcoded number
of iterations. This changes uses `wait` and `notify` and atomic
operations to keep track of when the spawned threads are done and join
on the main thread appropriately.
* various fixes and tweaks due to the PR review
---------
Signed-off-by: Harald Hoyer <harald@profian.com>
Co-authored-by: Harald Hoyer <harald@profian.com>
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
* update cap-std family and its deps, and audit them
* audit base64: append a safe-to-deploy entry
I mistakenly marked it safe-to-run not understanding that safe-to-deploy was required.
* update to fd-lock 3.0.10
eliminates duplicate dep on windows-sys
Most of these optimizations are in the egraph `cprop.isle` rules now,
making a separate crate unnecessary.
Also I think the `udiv` optimizations here are straight-up wrong (doing
signed instead of unsigned division, and panicking instead of preserving
traps on division by zero) so I'm guessing this crate isn't seriously
used anywhere.
At the least, bjorn3 confirms that cg_clif doesn't use this, and I've
verified that Wasmtime doesn't either.
Closes#1090.
Nothing major pulled in here, but wanted to update to the latest
versions which enable tail calls by default. When used in Wasmtime,
however, the feature is disabled without the possibility of being
enabled since it's not implemented.
* Adding in the foundations for Winch `filetests`
This commit adds two new crates into the Winch workspace:
`filetests` and `test-macros`. The intent is to mimic the
structure of Cranelift `filetests`, but in a simpler way.
* Updates to documentation
This commits adds a high level document to outline how to test Winch
through the `winch-tools` utility. It also updates some inline
documentation which gets propagated to the CLI.
* Updating test-macro to use a glob instead of only a flat directory
* Update WIT tooling used by Wasmtime
This commit updates the WIT tooling, namely the wasm-tools family of
crates, with recent updates. Notably:
* bytecodealliance/wasm-tools#867
* bytecodealliance/wasm-tools#871
This updates index spaces in components and additionally bumps the
minimum required version of the component binary format to be consumed
by Wasmtime (because of the index space changes). Additionally WIT
tooling now fully supports `use`.
Note that WIT tooling doesn't, at this time, fully support packages and
depending on remotely defined WIT packages. Currently WIT still needs to
be vendored in the project. It's hoped that future work with `cargo
component` and possible integration here could make the story about
depending on remotely-defined WIT more ergonomic and streamlined.
* Fix `bindgen!` codegen tests
* Add a test for `use` paths an implement support
* Update to crates.io versions of wasm-tools
* Uncomment codegen tests
* Use the `sym` operator for inline assembly
Avoids extra `#[no_mangle]` functions and undue symbols being exposed
from Wasmtime. This is a newly stabilized feature in Rust 1.66.0. I've
also added a `rust-version` entry to the `wasmtime` crate to try to head
off possible reports in the future about odd error messages or usage of
unstable features if the rustc version is too old.
* Fix a s390x warning
* Add `rust-version` annotation to Wasmtime crate
As the other main entrypoint for embedders.
This adds support for `.wat` tests in `cranelift-filetest`. The test runner
translates the WAT to Wasm and then uses `cranelift-wasm` to translate the Wasm
to CLIF.
These tests are always precise output tests. The test expectations can be
updated by running tests with the `CRANELIFT_TEST_BLESS=1` environment variable
set, similar to our compile precise output tests. The test's expected output is
contained in the last comment in the test file.
The tests allow for configuring the kinds of heaps used to implement Wasm linear
memory via TOML in a `;;!` comment at the start of the test.
To get ISA and Cranelift flags parsing available in the filetests crate, I had
to move the `parse_sets_and_triple` helper from the `cranelift-tools` binary
crate to the `cranelift-reader` crate, where I think it logically
fits.
Additionally, I had to make some more bits of `cranelift-wasm`'s dummy
environment `pub` so that I could properly wrap and compose it with the
environment used for the `.wat` tests. I don't think this is a big deal, but if
we eventually want to clean this stuff up, we can probably remove the dummy
environments completely, remove `translate_module`, and fold them into these new
test environments and test runner (since Wasmtime isn't using those things
anyways).
* - Added `--json` flag to settings command
- Refactored gathering of data into a `Settings` struct which can be used in both human/machine readable paths
- Split out human readable output to another function, it produces exactly the same result as before
* Outputting JSON by hand formatting it. This approach has the advantage of not needing any extra dependencies (i.e.serde), but is obviously a bit ugly.
* Rewritten JSON serialization to use serde
* Commenting and formatting
* Applied rustfmt
* Reduced version of serde and serde_json to fix cargo vet errors
* Updated cargo.lock to fix cargo vet errors
* egraph support: rewrite to work in terms of CLIF data structures.
This work rewrites the "egraph"-based optimization framework in
Cranelift to operate on aegraphs (acyclic egraphs) represented in the
CLIF itself rather than as a separate data structure to which and from
which we translate the CLIF.
The basic idea is to add a new kind of value, a "union", that is like an
alias but refers to two other values rather than one. This allows us to
represent an eclass of enodes (values) as a tree. The union node allows
for a value to have *multiple representations*: either constituent value
could be used, and (in well-formed CLIF produced by correct
optimization rules) they must be equivalent.
Like the old egraph infrastructure, we take advantage of acyclicity and
eager rule application to do optimization in a single pass. Like before,
we integrate GVN (during the optimization pass) and LICM (during
elaboration).
Unlike the old egraph infrastructure, everything stays in the
DataFlowGraph. "Pure" enodes are represented as instructions that have
values attached, but that are not placed into the function layout. When
entering "egraph" form, we remove them from the layout while optimizing.
When leaving "egraph" form, during elaboration, we can place an
instruction back into the layout the first time we elaborate the enode;
if we elaborate it more than once, we clone the instruction.
The implementation performs two passes overall:
- One, a forward pass in RPO (to see defs before uses), that (i) removes
"pure" instructions from the layout and (ii) optimizes as it goes. As
before, we eagerly optimize, so we form the entire union of optimized
forms of a value before we see any uses of that value. This lets us
rewrite uses to use the most "up-to-date" form of the value and
canonicalize and optimize that form.
The eager rewriting and acyclic representation make each other work
(we could not eagerly rewrite if there were cycles; and acyclicity
does not miss optimization opportunities only because the first time
we introduce a value, we immediately produce its "best" form). This
design choice is also what allows us to avoid the "parent pointers"
and fixpoint loop of traditional egraphs.
This forward optimization pass keeps a scoped hashmap to "intern"
nodes (thus performing GVN), and also interleaves on a per-instruction
level with alias analysis. The interleaving with alias analysis allows
alias analysis to see the most optimized form of each address (so it
can see equivalences), and allows the next value to see any
equivalences (reuses of loads or stored values) that alias analysis
uncovers.
- Two, a forward pass in domtree preorder, that "elaborates" pure enodes
back into the layout, possibly in multiple places if needed. This
tracks the loop nest and hoists nodes as needed, performing LICM as it
goes. Note that by doing this in forward order, we avoid the
"fixpoint" that traditional LICM needs: we hoist a def before its
uses, so when we place a node, we place it in the right place the
first time rather than moving later.
This PR replaces the old (a)egraph implementation. It removes both the
cranelift-egraph crate and the logic in cranelift-codegen that uses it.
On `spidermonkey.wasm` running a simple recursive Fibonacci
microbenchmark, this work shows 5.5% compile-time reduction and 7.7%
runtime improvement (speedup).
Most of this implementation was done in (very productive) pair
programming sessions with Jamey Sharp, thus:
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
* Review feedback.
* Review feedback.
* Review feedback.
* Bugfix: cprop rule: `(x + k1) - k2` becomes `x - (k2 - k1)`, not `x - (k1 - k2)`.
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
* Import Wasmtime support from the `wit-bindgen` repo
This commit imports the `wit-bindgen-gen-host-wasmtime-rust` crate from
the `wit-bindgen` repository into the upstream Wasmtime repository. I've
chosen to not import the full history here since the crate is relatively
small and doesn't have a ton of complexity. While the history of the
crate is quite long the current iteration of the crate's history is
relatively short so there's not a ton of import there anyway. The
thinking is that this can now continue to evolve in-tree.
* Refactor `wasmtime-component-macro` a bit
Make room for a `wit_bindgen` macro to slot in.
* Add initial support for a `bindgen` macro
* Add tests for `wasmtime::component::bindgen!`
* Improve error forgetting `async` feature
* Add end-to-end tests for bindgen
* Add an audit of `unicase`
* Add a license to the test-helpers crate
* Add vet entry for `pulldown-cmark`
* Update publish script with new crate
* Try to fix publish script
* Update audits
* Update lock file
* Add release notes for 3.0.1
* Update some version directives for crates in Wasmtime
* Mark anything with `publish = false` as version 0.0.0
* Mark the icache coherence crate with the same version as Wasmtime
* Fix manifest directives
The main change here is that io-lifetimes 1.0 switches to use the I/O safety
feature in the standard library rather than providing its own copy.
This also updates to windows-sys 0.42.0 and rustix 0.36.
* feat: implement memory.atomic.notify,wait32,wait64
Added the parking_spot crate, which provides the needed registry for the
operations.
Signed-off-by: Harald Hoyer <harald@profian.com>
* fix: change trap message for HeapMisaligned
The threads spec test wants "unaligned atomic"
instead of "misaligned memory access".
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add test for atomic wait on non-shared memory
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add tests/spec_testsuite/proposals/threads
without pooling and reference types.
Also "shared_memory" is added to the "spectest" interface.
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add atomics_notify.wast
checking that notify with 0 waiters returns 0 on shared and non-shared
memory.
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add tests for atomic wait on shared memory
- return 2 - timeout for 0
- return 2 - timeout for 1000ns
- return 1 - invalid value
Signed-off-by: Harald Hoyer <harald@profian.com>
* fixup! feat: implement memory.atomic.notify,wait32,wait64
Signed-off-by: Harald Hoyer <harald@profian.com>
* fixup! feat: implement memory.atomic.notify,wait32,wait64
Signed-off-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Harald Hoyer <harald@profian.com>
In order to properly understand the impact of providing thread-safe
implmentations of WASI contexts (#5235), we need benchmarks that measure
the current performance of WASI calls using Wiggle. This change adds
several common WASI scenarios as WAT files (see `benches/wasi/*.wat`)
and benchmarks them with `criterion`. Using `criterion`'s `iter_custom`,
the WAT file runs the desired number of benchmark iterations internally
and the total duration of the runs is divided to get the average time
for each loop iteration.
Why WAT? When compiling these benchmarks from Rust to `wasm32-wasi`, the
output files are large, contain other WASI imports than the desired
ones, and overall it is difficult to tell if we are measuring what we
expect. By hand-writing the WAT, it is (slightly) more clear what each
benchmark is doing.
* Unconditionally use `MemoryImageSlot`
This commit removes the internal branching within the pooling instance
allocator to sometimes use a `MemoryImageSlot` and sometimes now.
Instead this is now unconditionally used in all situations on all
platforms. This fixes an issue where the state of a slot could get
corrupted if modules being instantiated switched from having images to
not having an image or vice versa.
The bulk of this commit is the removal of the `memory-init-cow`
compile-time feature in addition to adding Windows support to the
`cow.rs` file.
* Fix compile on Unix
* Add a stricter assertion for static memory bounds
Double-check that when a memory is allocated the configuration required
is satisfied by the pooling allocator.
* Pull `Module` out of `ModuleTextBuilder`
This commit is the first in what will likely be a number towards
preparing for serializing a compiled component to bytes, a precompiled
artifact. To that end my rough plan is to merge all of the compiled
artifacts for a component into one large object file instead of having
lots of separate object files and lots of separate mmaps to manage. To
that end I plan on eventually using `ModuleTextBuilder` to build one
large text section for all core wasm modules and trampolines, meaning
that `ModuleTextBuilder` is no longer specific to one module. I've
extracted out functionality such as function name calculation as well as
relocation resolving (now a closure passed in) in preparation for this.
For now this just keeps tests passing, and the trajectory for this
should become more clear over the following commits.
* Remove component-specific object emission
This commit removes the `ComponentCompiler::emit_obj` function in favor
of `Compiler::emit_obj`, now renamed `append_code`. This involved
significantly refactoring code emission to take a flat list of functions
into `append_code` and the caller is responsible for weaving together
various "families" of functions and un-weaving them afterwards.
* Consolidate ELF parsing in `CodeMemory`
This commit moves the ELF file parsing and section iteration from
`CompiledModule` into `CodeMemory` so one location keeps track of
section ranges and such. This is in preparation for sharing much of this
code with components which needs all the same sections to get tracked
but won't be using `CompiledModule`. A small side benefit from this is
that the section parsing done in `CodeMemory` and `CompiledModule` is no
longer duplicated.
* Remove separately tracked traps in components
Previously components would generate an "always trapping" function
and the metadata around which pc was allowed to trap was handled
manually for components. With recent refactorings the Wasmtime-standard
trap section in object files is now being generated for components as
well which means that can be reused instead of custom-tracking this
metadata. This commit removes the manual tracking for the `always_trap`
functions and plumbs the necessary bits around to make components look
more like modules.
* Remove a now-unnecessary `Arc` in `Module`
Not expected to have any measurable impact on performance, but
complexity-wise this should make it a bit easier to understand the
internals since there's no longer any need to store this somewhere else
than its owner's location.
* Merge compilation artifacts of components
This commit is a large refactoring of the component compilation process
to produce a single artifact instead of multiple binary artifacts. The
core wasm compilation process is refactored as well to share as much
code as necessary with the component compilation process.
This method of representing a compiled component necessitated a few
medium-sized changes internally within Wasmtime:
* A new data structure was created, `CodeObject`, which represents
metadata about a single compiled artifact. This is then stored as an
`Arc` within a component and a module. For `Module` this is always
uniquely owned and represents a shuffling around of data from one
owner to another. For a `Component`, however, this is shared amongst
all loaded modules and the top-level component.
* The "module registry" which is used for symbolicating backtraces and
for trap information has been updated to account for a single region
of loaded code holding possibly multiple modules. This involved adding
a second-level `BTreeMap` for now. This will likely slow down
instantiation slightly but if it poses an issue in the future this
should be able to be represented with a more clever data structure.
This commit additionally solves a number of longstanding issues with
components such as compiling only one host-to-wasm trampoline per
signature instead of possibly once-per-module. Additionally the
`SignatureCollection` registration now happens once-per-component
instead of once-per-module-within-a-component.
* Fix compile errors from prior commits
* Support AOT-compiling components
This commit adds support for AOT-compiled components in the same manner
as `Module`, specifically adding:
* `Engine::precompile_component`
* `Component::serialize`
* `Component::deserialize`
* `Component::deserialize_file`
Internally the support for components looks quite similar to `Module`.
All the prior commits to this made adding the support here
(unsurprisingly) easy. Components are represented as a single object
file as are modules, and the functions for each module are all piled
into the same object file next to each other (as are areas such as data
sections). Support was also added here to quickly differentiate compiled
components vs compiled modules via the `e_flags` field in the ELF
header.
* Prevent serializing exported modules on components
The current representation of a module within a component means that the
implementation of `Module::serialize` will not work if the module is
exported from a component. The reason for this is that `serialize`
doesn't actually do anything and simply returns the underlying mmap as a
list of bytes. The mmap, however, has `.wasmtime.info` describing
component metadata as opposed to this module's metadata. While rewriting
this section could be implemented it's not so easy to do so and is
otherwise seen as not super important of a feature right now anyway.
* Fix windows build
* Fix an unused function warning
* Update crates/environ/src/compilation.rs
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Initial skeleton for Winch
This commit introduces the initial skeleton for Winch, the "baseline"
compiler.
This skeleton contains mostly setup code for the ISA, ABI, registers,
and compilation environment abstractions. It also includes the
calculation of function local slots.
As of this commit, the structure of these abstractions looks like the
following:
+------------------------+
| v
+----------+ +-----+ +-----------+-----+-----------------+
| Compiler | --> | ISA | --> | Registers | ABI | Compilation Env |
+----------+ +-----+ +-----------+-----+-----------------+
| ^
+------------------------------+
* Compilation environment will hold a reference to the function data
* Add basic documentation to the ABI trait
* Enable x86 and arm64 in cranelift-codegen
* Add reg_name function for x64
* Introduce the concept of a MacroAssembler and Assembler
This commit introduces the concept of a MacroAsesembler and
Assembler. The MacroAssembler trait will provide a high enough
interface across architectures so that each ISA implementation can use their own low-level
Assembler implementation to fulfill the interface. Each Assembler will
provide a 1-1 mapping to each ISA instruction.
As of this commit, only a partial debug implementation is provided for
the x64 Assembler.
* Add a newtype over PReg
Adds a newtype `Reg` over regalloc2::PReg; this ensures that Winch
will operate only on the concept of `Reg`. This change is temporary
until we have the necessary machinery to share a common Reg
abstraction via `cranelift_asm`
* Improvements to local calcuation
- Add `LocalSlot::addressed_from_sp`
- Use `u32` for local slot and local sizes calculation
* Add helper methods to ABIArg
Adds helper methods to retrieve register and type information from the argument
* Make locals_size public in frame
* Improve x64 register naming depending on size
* Add new methods to the masm interface
This commit introduces the ability for the MacroAssembler to reserve
stack space, get the address of a given local and perform a stack
store based on the concept of `Operand`s.
There are several motivating factors to introduce the concept of an
Operand:
- Make the translation between Winch and Cranelift easier;
- Make dispatching from the MacroAssembler to the underlying Assembler
- easier by minimizing the amount of functions that we need to define
- in order to satisfy the store/load combinations
This commit also introduces the concept of a memory address, which
essentially describes the addressing modes; as of this commit only one
addressing mode is supported. We'll also need to verify that this
structure will play nicely with arm64.
* Blank masm implementation for arm64
* Implementation of reserve_stack, local_address, store and fp_offset
for x64
* Implement function prologue and argument register spilling
* Add structopt and wat
* Fix debug instruction formatting
* Make TargetISA trait publicly accessible
* Modify the MacroAssembler finalize siganture to return a slice of strings
* Introduce a simple CLI for Winch
To be able to compile Wasm programs with Winch independently. Mostly
meant for testing / debugging
* Fix bug in x64 assembler mov_rm
* Remove unused import
* Move the stack slot calculation to the Frame
This commit moves the calculation of the stack slots to the frame
handler abstraction and also includes the calculation of the limits
for the function defined locals, which will be used to zero the locals
that are not associated to function arguments
* Add i32 and i64 constructors to local slots
* Introduce the concept of DefinedLocalsRange
This commit introduces `DefinedLocalsRange` to track the stack offset
at which the function-defined locals start and end; this is later used
to zero-out that stack region
* Add constructors for int and float registers
* Add a placeholder stack implementation
* Add a regset abstraction to track register availability
Adds a bit set abstraction to track register availability for register
allocation.
The bit set has no specific knowledge about physical registers, it
works on the register's hardware encoding as the source of truth.
Each RegSet is expected to be created with the universe of allocatable
registers per ISA when starting the compilation of a particular function.
* Add an abstraction over register and immediate
This is meant to be used as the source for stores.
* Add a way to zero local slots and an initial skeletion of regalloc
This commit introduces `zero_local_slots` to the MacroAssembler; which
ensures that function defined locals are zeroed out when starting the
function body.
The algorithm divides the defined function locals stack range
into 8 byte slots and stores a zero at each address. This process
relies on register allocation if the amount of slots that need to be
initialized is greater than 1. In such case, the next available
register is requested to the register set and it's used to store a 0,
which is then stored at every local slot
* Update to wasmparser 0.92
* Correctly track if the regset has registers available
* Add a result entry to the ABI signature
This commuit introduces ABIResult as part of the ABISignature;
this struct will track how function results are stored; initially it
will consiste of a single register that will be requested to the
register allocator at the end of the function; potentially causing a spill
* Move zero local slots and add more granular methods to the masm
This commit removes zeroing local slots from the MacroAssembler and
instead adds more granular methods to it (e.g `zero`, `add`).
This allows for better code sharing since most of the work done by the
algorithm for zeroing slots will be the same in all targets, except
for the binary emissions pieces, which is what gets delegated to the masm
* Use wasmparser's visitor API and add initial support for const and add
This commit adds initial support for the I32Const and I32
instructions; this involves adding a minimum for register
allocation. Note that some regalloc pieces are still incomplete, since
for the current set of supported instructions they are not needed.
* Make the ty field public in Local
* Add scratch_reg to the abi
* Add a method to get a particular local from the Frame
* Split the compilation environment abstraction
This commit splits the compilation environment into two more concise
abstractions:
1. CodeGen: the main abstraction for code generation
2. CodeGenContext: abstraction that shares the common pieces for
compilation; these pieces are shared between the code generator and
the register allocator
* Add `push` and `load` to the MacroAssembler
* Remove dead code warnings for unused paths
* Map ISA features to cranelift-codegen ISA features
* Apply formatting
* Fix Cargo.toml after a bad rebase
* Add component-compiler feature
* Use clap instead of structopt
* Add winch to publish.rs script
* Minor formatting
* Add tests to RegSet and fix two bugs when freeing and checking for
register availability
* Add tests to Stack
* Free source register after a non-constant i32 add
* Improve comments
- Remove unneeded comments
- And improve some of the TODO items
* Update default features
* Drop the ABI generic param and pass the word_size information directly
To avoid dealing with dead code warnings this commit passes the word
size information directly, since it's the only piece of information
needed from the ABI by Codegen until now
* Remove dead code
This piece of code will be put back once we start integrating Winch
with Wasmtime
* Remove unused enum variant
This variant doesn't get constructed; it should be added back once a
backend is added and not enabled by default or when Winch gets
integrated into Wasmtime
* Fix unused code in regset tests
* Update spec testsuite
* Switch the visitor pattern for a simpler operator match
This commit removes the usage of wasmparser's visitor pattern and
instead defaults to a simpler operator matching approach. This removes
the complexity of having to define all the visitor trait functions at once.
* Use wasmparser's Visitor trait with a different macro strategy
This commit puts back wasmparser's Visitor trait, with a sigle;
simpler macro, only used for unsupported operators.
* Restructure Winch
This commit restuructures Winch's parts. It divides the initial
approach into three main crates: `winch-codegen`,`wasmtime-winch` and `winch-tools`.
`wasmtime-winch` is reponsible for the Wasmtime-Winch integration.
`winch-codegen` is solely responsible for code generation.
`winch-tools` is CLI tool to compile Wasm programs, mainly for testing purposes.
* Refactor zero local slots
This commit moves the logic of zeroing local slots from the codegen
module into a method with a default implementation in the
MacroAssembler trait: `zero_mem_range`.
The refactored implementation is very similar to the previous
implementation with the only difference
that it doesn't allocates a general-purpose register; it instead uses
the register allocator to retrieve the scratch register and uses this
register to unroll the series of zero stores.
* Tie the codegen creation to the ISA ABI
This commit makes the relationship between the ISA ABI and the codegen
explicit. This allows us to pass down ABI-specific bit and pieces to
the codegeneration. In this case the only concrete piece that we need
is the ABI word size.
* Mark winch as publishable directory
* Revamp winch docs
This commit ensures that all the code comments in Winch are compliant
with the syle used in the rest of Wasmtime's codebase.
It also imptoves, generally the quality of the comments in some modules.
* Panic when using multi-value when the target is aarch64
Similar to x64, this commit ensures that the abi signature of the
current function doesn't use multi-value returns
* Document the usage of directives
* Use endianness instead of endianess in the ISA trait
* Introduce a three-argument form in the MacroAssembler
This commit introduces the usage of three-argument form for the
MacroAssembler interface. This allows for a natural mapping for
architectures like aarch64. In the case of x64, the implementation can
simply restrict the implementation asserting for equality in two of
the arguments of defaulting to a differnt set of instructions.
As of this commit, the implementation of `add` panics if the
destination and the first source arguments are not equal; internally
the x64 assembler implementation will ensure that all the allowed
combinations of `add` are satisfied. The reason for panicking and not
emitting a `mov` followed by an `add` for example is simply because register
allocation happens right before calling `add`, which ensures any
register-to-register moves, if needed.
This implementation will evolve in the future and this panic will be
lifted if needed.
* Improve the documentation for the MacroAssembler.
Documents the usage of three-arg form and the intention around the
high-level interface.
* Format comments in remaining modules
* Clean up Cargo.toml for winch pieces
This commit adds missing fields to each of Winch's Cargo.toml.
* Use `ModuleTranslation::get_types()` to derive the function type
* Assert that start range is always word-size aligned
Alex Crichton
Brendan Burns
Remo Senekowitsch
wasmtime-publish
Kevin Rizzo
Saúl Cabrera
Nick Fitzgerald
Qinxuan Chen
Andrew Brown
Sven Sauleau
Jamey Sharp
Alphyr
Pat Hickey
Dan Gohman
Martin Evans
Chris Fallin
Harald Hoyer