By not activating the `derive` feature on `serde`, the compilation speed
can be improved by a lot. This is because `serde` can then compile in
parallel to `serde_derive`, allowing it to finish compilation possibly
even before `serde_derive`, unblocking all the crates waiting for
`serde` to start compiling much sooner.
As it turns out the main deciding factor for how long the compile time of a
project is, is primarly determined by the depth of dependencies rather
than the width. In other words, a crate's compile times aren't affected
by how many crates it depends on, but rather by the longest chain of
dependencies that it needs to wait on. In many cases `serde` is part of
that long chain, as it is part of a long chain if the `derive` feature
is active:
`proc-macro2` compile build script > `proc-macro2` run build script >
`proc-macro2` > `quote` > `syn` > `serde_derive` > `serde` >
`serde_json` (or any crate that depends on serde)
By decoupling it from `serde_derive`, the chain is shortened and compile
times get much better.
Check this issue for a deeper elaboration:
https://github.com/serde-rs/serde/issues/2584
For `wasmtime` I'm seeing a reduction from 24.75s to 22.45s when
compiling in `release` mode. This is because wasmtime through `gimli`
has a dependency on `indexmap` which can only start compiling when
`serde` is finished, which you want to happen as early as possible so
some of wasmtime's dependencies can start compiling.
To measure the full effect, the dependencies can't by themselves
activate the `derive` feature. I've upstreamed a patch for
`fxprof-processed-profile` which was the only dependency that activated
it for `wasmtime` (not yet published to crates.io). `wasmtime-cli` and
co. may need patches for their dependencies to see a similar
improvement.
* Implement component-to-component calls with resources
This fills out support in FACT in Wasmtime to support
component-to-component calls that use resources. This ended up being
relatively simple as it's "just" a matter of moving resources between
tables which at this time bottoms out in calls to the host. These new
trampolines are are relatively easy to add after #6751 which helps keep
this change contained.
Closes#6696
* Review comments
* Update Wasmtime for upcoming WIT changes
This PR integrates bytecodealliance/wasm-tools#1027 into Wasmtime. The
main changes here are:
* WIT syntax is updated with WebAssembly/component-model#193
* Generated bindings in the `bindgen!` macro have been updated to
reflect the new structure of WIT.
* The accepted component model binary format has been updated to account
for changes.
This PR disables wasi-http tests and the on-by-default feature because
the WIT syntax has been updated but the submodule containing the WITs
has not been updated yet so there's no way to get that building
temporarily. Once that's updated then this can be reenabled.
* Update wasmtime-wasi crate with new WIT
* Add wit-bindgen override for the updated version
* Officially disable wasi-http tests/building
* Move test-reactor WIT into the main WIT files
Don't store duplicates with the rest of the WASI WIT files we have.
* Remove adapter's copy of WIT files
* Disable default features for wit-bindgen
* Plumb disabling wasi-http tests a bit more
* Fix reactor tests and adapter build
* Remove no-longer-needed feature
* Update adapter verification script
* Back out some wasi-http hacks
* Update vet and some dependency sources
* Move where wit-bindgen comes from
Make it a more "official" location which is also less likely to be
accidentally deleted in the future.
* Don't document wasi-http-tests
* Make wasmtime-types type check
* Make wasmtime-environ type check.
* Make wasmtime-runtime type check
* Make cranelift-wasm type check
* Make wasmtime-cranelift type check
* Make wasmtime type check
* Make wasmtime-wast type check
* Make testsuite compile
* Address Luna's comments
* Restore compatibility with effect-handlers/wasm-tools#func-ref-2
* Add function refs feature flag; support testing
* Provide function references support in helpers
- Always support Index in blocktypes
- Support Index as table type by pretending to be Func
- Etc
* Implement ref.as_non_null
* Add br_on_null
* Update Cargo.lock to use wasm-tools with peek
This will ultimately be reverted when we refer to
wasm-tools#function-references, which doesn't have peek, but does have type
annotations on CallRef
* Add call_ref
* Support typed function references in ref.null
* Implement br_on_non_null
* Remove extraneous flag; default func refs false
* Use IndirectCallToNull trap code for call_ref
* Factor common call_indirect / call_ref into a fn
* Remove copypasta clippy attribute / format
* Add a some more tests for typed table instructions
There certainly need to be many more, but this at least catches the bugs fixed
in the next commit
* Fix missing typed cases for table_grow, table_fill
* Document trap code; remove answered question
* Mark wasm-tools to wasmtime reftype infallible
* Fix reversed conditional
* Scope externref/funcref shorthands within WasmRefType
* Merge with upstream
* Make wasmtime compile again
* Fix warnings
* Remove Bot from the type algebra
* Fix table tests.
`wast::Cranelift::spec::function_references::table`
`wast::Cranelift::spec::function_references::table_pooling`
* Fix table{get,set} tests.
```
wast::Cranelift::misc::function_references::table_get
wast::Cranelift::misc::function_references::table_get_pooling
wast::Cranelift::misc::function_references::table_set
wast::Cranelift::misc::function_references::table_set_pooling
```
* Insert subtype check to fix local_get tests.
```
wast::Cranelift::spec::function_references::local_get
wast::Cranelift::spec::function_references::local_get_pooling
```
* Fix compilation of `br_on_non_null`.
The branch destinations were the other way round... :-)
Fixes the following test failures:
```
wast::Cranelift::spec::function_references::br_on_non_null
wast::Cranelift::spec::function_references::br_on_non_null_pooling
```
* Fix ref_as_non_null tests.
The test was failing due to the wrong error message being printed. As
per upstream folks' suggest we were using the trap code
`IndirectCallToNull`, but it produces an unexpected error message.
This commit reinstates the `NullReference` trap code. It produces the
expected error message. We will have to chat with the maintainers
upstream about how to handle these "test failures".
Fixes the following test failures:
```
wast::Cranelift::spec::function_references::ref_as_non_null
wast::Cranelift::spec::function_references::ref_as_non_null_pooling
```
* Fix a call_ref regression.
* Fix global tests.
Extend `is_matching_assert_invalid_error_message` to circumvent the textual error message failure.
Fixes the following test failures:
```
wast::Cranelift::spec::function_references::global
wast::Cranelift::spec::function_references::global_pooling
```
* Cargo update
* Update
* Spell out some cases in match_val
* Disgusting hack to subvert limitations of type reconstruction.
In the function `wasmtime::values::Val::ty()` attempts to reconstruct
the type of its underlying value purely based on the shape of the
value. With function references proposal this sort of reconstruction
is no longer complete as a source reference type may have been
nullable. Nullability is not inferrable by looking at the shape of the
runtime object alone.
Consequently, the runtime cannot reconstruct the type for
`Val::FuncRef` and `Val::ExternRef` by looking at their respective
shapes.
* Address workflows comments.
* null reference => null_reference for CLIF parsing compliance.
* Delete duplicate-loads-dynamic-memory-egraph (again)
* Idiomatic code change.
* Nullability subtyping + fix non-null storage check.
This commit removes the `hacky_eq` check in `func.rs`. Instead it is
replaced by a subtype check. This subtype check occurs in
`externals.rs` too.
This commit also fixes a bug. Previously, it was possible to store a
null reference into a non-null table cell. I have added to new test
cases for this bug: one for funcrefs and another for externrefs.
* Trigger unimplemented for typed function references. Format values.rs
* run cargo fmt
* Explicitly match on HeapType::Extern.
* Address cranelift-related feedback
* Remove PartialEq,Eq from ValType, RefType, HeapType.
* Pin wasmparser to a fairly recent commit.
* Run cargo fmt
* Ignore tail call tests.
* Remove garbage
* Revert changes to wasmtime public API.
* Run cargo fmt
* Get more CI passing (#19)
* Undo Cargo.lock changes
* Fix build of cranelift tests
* Implement link-time matches relation. Disable tests failing due to lack of public API support.
* Run cargo fmt
* Run cargo fmt
* Initial implementation of eager table initialization
* Tidy up eager table initialisation
* Cargo fmt
* Ignore type-equivalence test
* Replace TODOs with descriptive comments.
* Various changes found during review (#21)
* Clarify a comment
This isn't only used for null references
* Resolve a TODO in local init
Don't initialize non-nullable locals to null, instead skip
initialization entirely and wasm validation will ensure it's always
initialized in the scope where it's used.
* Clarify a comment and skipping the null check.
* Remove a stray comment
* Change representation of `WasmHeapType`
Use a `SignatureIndex` instead of a `u32` which while not 100% correct
should be more correct. This additionally renames the `Index` variant to
`TypedFunc` to leave space for future types which aren't functions to
not all go into an `Index` variant.
This required updates to Winch because `wasmtime_environ` types can no
longer be converted back to their `wasmparser` equivalents. Additionally
this means that all type translation needs to go through some form of
context to resolve indices which is now encapsulated in a `TypeConvert`
trait implemented in various locations.
* Refactor table initialization
Reduce some duplication and simplify some data structures to have a more
direct form of table initialization and a bit more graceful handling of
element-initialized tables. Additionally element-initialize tables are
now treated the same as if there's a large element segment initializing
them.
* Clean up some unrelated chagnes
* Simplify Table bindings slightly
* Remove a no-longer-needed TODO
* Add a FIXME for `SignatureIndex` in `WasmHeapType`
* Add a FIXME for panicking on exposing function-references types
* Fix a warning on nightly
* Fix tests for winch and cranelift
* Cargo fmt
* Fix arity mismatch in aarch64/abi
---------
Co-authored-by: Daniel Hillerström <daniel.hillerstrom@ed.ac.uk>
Co-authored-by: Daniel Hillerström <daniel.hillerstrom@huawei.com>
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
* wasmtime: Refactor compilation orchestration
Before, the acts of discovering what we need to compile and actually compiling
those things was intertwined. This meant that we weren't fanning out as wide as
we could in parallel compilation because we would do things like compile all
Wasm functions in parallel, and all wasm-to-native trampolines in parallel, but
not compile those two groups in parallel with each other.
Now we split discovery and compilation into separate phases: first we discover
all the work we need to do, then we do it all in parallel at once.
* Address review comments
* Remove the initializer from a global's type information
This commit removes the `Global::initializer` field to instead only
store type information about the global rather than its initialization
state. Instead now the initializer is stored separately from the type of
the global, and only for defined globals. This removes the need in a few
locations to synthesize dummy initializers.
* Actually delete what I intended to delete
* Simplify global initializer loop
This notably updates `wasmparser` for updates to the relaxed-simd
proposal and an implementation of the function-references proposal.
Additionally there are some minor bug fixes being picked up for WIT and
the component model.
* Update wasm-tools dependencies
This update brings in a number of features such as:
* The component model binary format and AST has been slightly adjusted
in a few locations. Names are dropped from parameters/results now in
the internal representation since they were not used anyway. At this
time the ability to bind a multi-return function has not been exposed.
* The `wasmparser` validator pass will now share allocations with prior
functions, providing what's probably a very minor speedup for Wasmtime
itself.
* The text format for many component-related tests now requires named
parameters.
* Some new relaxed-simd instructions are updated to be ignored.
I hope to have a follow-up to expose the multi-return ability to the
embedding API of components.
* Update audit information for new crates
* Leverage Cargo's workspace inheritance feature
This commit is an attempt to reduce the complexity of the Cargo
manifests in this repository with Cargo's workspace-inheritance feature
becoming stable in Rust 1.64.0. This feature allows specifying fields in
the root workspace `Cargo.toml` which are then reused throughout the
workspace. For example this PR shares definitions such as:
* All of the Wasmtime-family of crates now use `version.workspace =
true` to have a single location which defines the version number.
* All crates use `edition.workspace = true` to have one default edition
for the entire workspace.
* Common dependencies are listed in `[workspace.dependencies]` to avoid
typing the same version number in a lot of different places (e.g. the
`wasmparser = "0.89.0"` is now in just one spot.
Currently the workspace-inheritance feature doesn't allow having two
different versions to inherit, so all of the Cranelift-family of crates
still manually specify their version. The inter-crate dependencies,
however, are shared amongst the root workspace.
This feature can be seen as a method of "preprocessing" of sorts for
Cargo manifests. This will help us develop Wasmtime but shouldn't have
any actual impact on the published artifacts -- everything's dependency
lists are still the same.
* Fix wasi-crypto tests
This commit replaces #4869 and represents the actual version bump that
should have happened had I remembered to bump the in-tree version of
Wasmtime to 1.0.0 prior to the branch-cut date. Alas!
* Upgrade wasm-tools crates, namely the component model
This commit pulls in the latest versions of all of the `wasm-tools`
family of crates. There were two major changes that happened in
`wasm-tools` in the meantime:
* bytecodealliance/wasm-tools#697 - this commit introduced a new API for
more efficiently reading binary operators from a wasm binary. The old
`Operator`-based reading was left in place, however, and continues to
be what Wasmtime uses. I hope to update Wasmtime in a future PR to use
this new API, but for now the biggest change is...
* bytecodealliance/wasm-tools#703 - this commit was a major update to
the component model AST. This commit almost entirely deals with the
fallout of this change.
The changes made to the component model were:
1. The `unit` type no longer exists. This was generally a simple change
where the `Unit` case in a few different locations were all removed.
2. The `expected` type was renamed to `result`. This similarly was
relatively lightweight and mostly just a renaming on the surface. I
took this opportunity to rename `val::Result` to `val::ResultVal` and
`types::Result` to `types::ResultType` to avoid clashing with the
standard library types. The `Option`-based types were handled with
this as well.
3. The payload type of `variant` and `result` types are now optional.
This affected many locations that calculate flat type
representations, ABI information, etc. The `#[derive(ComponentType)]`
macro now specifically handles Rust-defined `enum` types which have
no payload to the equivalent in the component model.
4. Functions can now return multiple parameters. This changed the
signature of invoking component functions because the return value is
now bound by `ComponentNamedList` (renamed from `ComponentParams`).
This had a large effect in the tests, fuzz test case generation, etc.
5. Function types with 2-or-more parameters/results must uniquely name
all parameters/results. This mostly affected the text format used
throughout the tests.
I haven't added specifically new tests for multi-return but I changed a
number of tests to use it. Additionally I've updated the fuzzers to all
exercise multi-return as well so I think we should get some good
coverage with that.
* Update version numbers
* Use crates.io
This commit builds on bytecodealliance/wasm-tools#690 to add support to
testing of the component model to execute functions when running
`*.wast` files. This support is all built on #4442 as functions are
invoked through a "dynamic" API. Right now the testing and integration
is fairly crude but I'm hoping that we can try to improve it over time
as necessary. For now this should provide a hopefully more convenient
syntax for unit tests and the like.
* Bump versions of wasm-tools crates
Note that this leaves new features in the component model, outer type
aliases for core wasm types, unimplemented for now.
* Move to crates.io-based versions of tools
This commit updates the wasm-tools family of crates, notably pulling in
the refactorings and updates from bytecodealliance/wasm-tools#621 for
the latest iteration of the component model. This commit additionally
updates all support for the component model for these changes, notably:
* Many bits and pieces of type information was refactored. Many
`FooTypeIndex` namings are now `TypeFooIndex`. Additionally there is
now `TypeIndex` as well as `ComponentTypeIndex` for the two type index
spaces in a component.
* A number of new sections are now processed to handle the core and
component variants.
* Internal maps were split such as the `funcs` map into
`component_funcs` and `funcs` (same for `instances`).
* Canonical options are now processed individually instead of one bulk
`into` definition.
Overall this was not a major update to the internals of handling the
component model in Wasmtime. Instead this was mostly a surface-level
refactoring to make sure that everything lines up with the new binary
format for components.
* All text syntax used in tests was updated to the new syntax.
* Add shared memories
This change adds the ability to use shared memories in Wasmtime when the
[threads proposal] is enabled. Shared memories are annotated as `shared`
in the WebAssembly syntax, e.g., `(memory 1 1 shared)`, and are
protected from concurrent access during `memory.size` and `memory.grow`.
[threads proposal]: https://github.com/WebAssembly/threads/blob/master/proposals/threads/Overview.md
In order to implement this in Wasmtime, there are two main cases to
cover:
- a program may simply create a shared memory and possibly export it;
this means that Wasmtime itself must be able to create shared
memories
- a user may create a shared memory externally and pass it in as an
import during instantiation; this is the case when the program
contains code like `(import "env" "memory" (memory 1 1
shared))`--this case is handled by a new Wasmtime API
type--`SharedMemory`
Because of the first case, this change allows any of the current
memory-creation mechanisms to work as-is. Wasmtime can still create
either static or dynamic memories in either on-demand or pooling modes,
and any of these memories can be considered shared. When shared, the
`Memory` runtime container will lock appropriately during `memory.size`
and `memory.grow` operations; since all memories use this container, it
is an ideal place for implementing the locking once and once only.
The second case is covered by the new `SharedMemory` structure. It uses
the same `Mmap` allocation under the hood as non-shared memories, but
allows the user to perform the allocation externally to Wasmtime and
share the memory across threads (via an `Arc`). The pointer address to
the actual memory is carefully wired through and owned by the
`SharedMemory` structure itself. This means that there are differing
views of where to access the pointer (i.e., `VMMemoryDefinition`): for
owned memories (the default), the `VMMemoryDefinition` is stored
directly by the `VMContext`; in the `SharedMemory` case, however, this
`VMContext` must point to this separate structure.
To ensure that the `VMContext` can always point to the correct
`VMMemoryDefinition`, this change alters the `VMContext` structure.
Since a `SharedMemory` owns its own `VMMemoryDefinition`, the
`defined_memories` table in the `VMContext` becomes a sequence of
pointers--in the shared memory case, they point to the
`VMMemoryDefinition` owned by the `SharedMemory` and in the owned memory
case (i.e., not shared) they point to `VMMemoryDefinition`s stored in a
new table, `owned_memories`.
This change adds an additional indirection (through the `*mut
VMMemoryDefinition` pointer) that could add overhead. Using an imported
memory as a proxy, we measured a 1-3% overhead of this approach on the
`pulldown-cmark` benchmark. To avoid this, Cranelift-generated code will
special-case the owned memory access (i.e., load a pointer directly to
the `owned_memories` entry) for `memory.size` so that only
shared memories (and imported memories, as before) incur the indirection
cost.
* review: remove thread feature check
* review: swap wasmtime-types dependency for existing wasmtime-environ use
* review: remove unused VMMemoryUnion
* review: reword cross-engine error message
* review: improve tests
* review: refactor to separate prevent Memory <-> SharedMemory conversion
* review: into_shared_memory -> as_shared_memory
* review: remove commented out code
* review: limit shared min/max to 32 bits
* review: skip imported memories
* review: imported memories are not owned
* review: remove TODO
* review: document unsafe send + sync
* review: add limiter assertion
* review: remove TODO
* review: improve tests
* review: fix doc test
* fix: fixes based on discussion with Alex
This changes several key parts:
- adds memory indexes to imports and exports
- makes `VMMemoryDefinition::current_length` an atomic usize
* review: add `Extern::SharedMemory`
* review: remove TODO
* review: atomically load from VMMemoryDescription in JIT-generated code
* review: add test probing the last available memory slot across threads
* fix: move assertion to new location due to rebase
* fix: doc link
* fix: add TODOs to c-api
* fix: broken doc link
* fix: modify pooling allocator messages in tests
* review: make owned_memory_index panic instead of returning an option
* review: clarify calculation of num_owned_memories
* review: move 'use' to top of file
* review: change '*const [u8]' to '*mut [u8]'
* review: remove TODO
* review: avoid hard-coding memory index
* review: remove 'preallocation' parameter from 'Memory::_new'
* fix: component model memory length
* review: check that shared memory plans are static
* review: ignore growth limits for shared memory
* review: improve atomic store comment
* review: add FIXME for memory growth failure
* review: add comment about absence of bounds-checked 'memory.size'
* review: make 'current_length()' doc comment more precise
* review: more comments related to memory.size non-determinism
* review: make 'vmmemory' unreachable for shared memory
* review: move code around
* review: thread plan through to 'wrap()'
* review: disallow shared memory allocation with the pooling allocator
* Initial skeleton of some component model processing
This commit is the first of what will likely be many to implement the
component model proposal in Wasmtime. This will be structured as a
series of incremental commits, most of which haven't been written yet.
My hope is to make this incremental and over time to make this easier to
review and easier to test each step in isolation.
Here much of the skeleton of how components are going to work in
Wasmtime is sketched out. This is not a complete implementation of the
component model so it's not all that useful yet, but some things you can
do are:
* Process the type section into a representation amenable for working
with in Wasmtime.
* Process the module section and register core wasm modules.
* Process the instance section for core wasm modules.
* Process core wasm module imports.
* Process core wasm instance aliasing.
* Ability to compile a component with core wasm embedded.
* Ability to instantiate a component with no imports.
* Ability to get functions from this component.
This is already starting to diverge from the previous module linking
representation where a `Component` will try to avoid unnecessary
metadata about the component and instead internally only have the bare
minimum necessary to instantiate the module. My hope is we can avoid
constructing most of the index spaces during instantiation only for it
to all ge thrown away. Additionally I'm predicting that we'll need to
see through processing where possible to know how to generate adapters
and where they are fused.
At this time you can't actually call a component's functions, and that's
the next PR that I would like to make.
* Add tests for the component model support
This commit uses the recently updated wasm-tools crates to add tests for
the component model added in the previous commit. This involved updating
the `wasmtime-wast` crate for component-model changes. Currently the
component support there is quite primitive, but enough to at least
instantiate components and verify the internals of Wasmtime are all
working correctly. Additionally some simple tests for the embedding API
have also been added.
* Update the wasm-tools family of crates
This commit updates these crates as used by Wasmtime for the recently
published versions to pull in changes necessary to support the component
model. I've split this out from #4005 to make it clear what's impacted
here and #4005 can simply rebase on top of this to pick up the necessary
changes.
* More test fixes
* Update wasm-tools crates
This commit updates the wasm-tools family of crates as used in Wasmtime.
Notably this brings in the update which removes module linking support
as well as a number of internal refactorings around names and such
within wasmparser itself. This updates all of the wasm translation
support which binds to wasmparser as appropriate.
Other crates all had API-compatible changes for at least what Wasmtime
used so no further changes were necessary beyond updating version
requirements.
* Update a test expectation
* Upgrade all crates to the Rust 2021 edition
I've personally started using the new format strings for things like
`panic!("some message {foo}")` or similar and have been upgrading crates
on a case-by-case basis, but I think it probably makes more sense to go
ahead and blanket upgrade everything so 2021 features are always
available.
* Fix compile of the C API
* Fix a warning
* Fix another warning
* Bump to 0.36.0
* Add a two-week delay to Wasmtime's release process
This commit is a proposal to update Wasmtime's release process with a
two-week delay from branching a release until it's actually officially
released. We've had two issues lately that came up which led to this proposal:
* In #3915 it was realized that changes just before the 0.35.0 release
weren't enough for an embedding use case, but the PR didn't meet the
expectations for a full patch release.
* At Fastly we were about to start rolling out a new version of Wasmtime
when over the weekend the fuzz bug #3951 was found. This led to the
desire internally to have a "must have been fuzzed for this long"
period of time for Wasmtime changes which we felt were better
reflected in the release process itself rather than something about
Fastly's own integration with Wasmtime.
This commit updates the automation for releases to unconditionally
create a `release-X.Y.Z` branch on the 5th of every month. The actual
release from this branch is then performed on the 20th of every month,
roughly two weeks later. This should provide a period of time to ensure
that all changes in a release are fuzzed for at least two weeks and
avoid any further surprises. This should also help with any last-minute
changes made just before a release if they need tweaking since
backporting to a not-yet-released branch is much easier.
Overall there are some new properties about Wasmtime with this proposal
as well:
* The `main` branch will always have a section in `RELEASES.md` which is
listed as "Unreleased" for us to fill out.
* The `main` branch will always be a version ahead of the latest
release. For example it will be bump pre-emptively as part of the
release process on the 5th where if `release-2.0.0` was created then
the `main` branch will have 3.0.0 Wasmtime.
* Dates for major versions are automatically updated in the
`RELEASES.md` notes.
The associated documentation for our release process is updated and the
various scripts should all be updated now as well with this commit.
* Add notes on a security patch
* Clarify security fixes shouldn't be previewed early on CI
* Remove the module linking implementation in Wasmtime
This commit removes the experimental implementation of the module
linking WebAssembly proposal from Wasmtime. The module linking is no
longer intended for core WebAssembly but is instead incorporated into
the component model now at this point. This means that very large parts
of Wasmtime's implementation of module linking are no longer applicable
and would change greatly with an implementation of the component model.
The main purpose of this is to remove Wasmtime's reliance on the support
for module-linking in `wasmparser` and tooling crates. With this
reliance removed we can move over to the `component-model` branch of
`wasmparser` and use the updated support for the component model.
Additionally given the trajectory of the component model proposal the
embedding API of Wasmtime will not look like what it looks like today
for WebAssembly. For example the core wasm `Instance` will not change
and instead a `Component` is likely to be added instead.
Some more rationale for this is in #3941, but the basic idea is that I
feel that it's not going to be viable to develop support for the
component model on a non-`main` branch of Wasmtime. Additionaly I don't
think it's viable, for the same reasons as `wasm-tools`, to support the
old module linking proposal and the new component model at the same
time.
This commit takes a moment to not only delete the existing module
linking implementation but some abstractions are also simplified. For
example module serialization is a bit simpler that there's only one
module. Additionally instantiation is much simpler since the only
initializer we have to deal with are imports and nothing else.
Closes#3941
* Fix doc link
* Update comments
* fuzzing: Add a custom mutator based on `wasm-mutate`
* fuzz: Add a version of the `compile` fuzz target that uses `wasm-mutate`
* Update `wasmparser` dependencies
* Update the spec reference testsuite submodule
This commit brings in recent updates to the spec test suite. Most of the
changes here were already fixed in `wasmparser` with some tweaks to
esoteric modules, but Wasmtime also gets a bug fix where where import
matching for the size of tables/memories is based on the current runtime
size of the table/memory rather than the original type of the
table/memory. This means that during type matching the actual value is
consulted for its size rather than using the minimum size listed in its
type.
* Fix now-missing directories in build script
The LICENSE file is missing in wasmtime-types crate.
As per the Apache 2.0 license, the license file itself
should be redistributed with the source code.
We _must not_ trigger a GC when moving refs from host code into
Wasm (e.g. returned from a host function or passed as arguments to a Wasm
function). After insertion into the table, this reference is no longer
rooted. If multiple references are being sent from the host into Wasm and we
allowed GCs during insertion, then the following events could happen:
* Reference A is inserted into the activations table. This does not trigger a
GC, but does fill the table to capacity.
* The caller's reference to A is removed. Now the only reference to A is from
the activations table.
* Reference B is inserted into the activations table. Because the table is at
capacity, a GC is triggered.
* A is reclaimed because the only reference keeping it alive was the activation
table's reference (it isn't inside any Wasm frames on the stack yet, so stack
scanning and stack maps don't increment its reference count).
* We transfer control to Wasm, giving it A and B. Wasm uses A. That's a use
after free.
To prevent uses after free, we cannot GC when moving refs into the
`VMExternRefActivationsTable` because we are passing them from the host to Wasm.
On the other hand, when we are *cloning* -- as opposed to moving -- refs from
the host to Wasm, then it is fine to GC while inserting into the activations
table, because the original referent that we are cloning from is still alive and
rooting the ref.
* Move `CompiledFunction` into wasmtime-cranelift
This commit moves the `wasmtime_environ::CompiledFunction` type into the
`wasmtime-cranelift` crate. This type has lots of Cranelift-specific
pieces of compilation and doesn't need to be generated by all Wasmtime
compilers. This replaces the usage in the `Compiler` trait with a
`Box<Any>` type that each compiler can select. Each compiler must still
produce a `FunctionInfo`, however, which is shared information we'll
deserialize for each module.
The `wasmtime-debug` crate is also folded into the `wasmtime-cranelift`
crate as a result of this commit. One possibility was to move the
`CompiledFunction` commit into its own crate and have `wasmtime-debug`
depend on that, but since `wasmtime-debug` is Cranelift-specific at this
time it didn't seem like it was too too necessary to keep it separate.
If `wasmtime-debug` supports other backends in the future we can
recreate a new crate, perhaps with it refactored to not depend on
Cranelift.
* Move wasmtime_environ::reference_type
This now belongs in wasmtime-cranelift and nowhere else
* Remove `Type` reexport in wasmtime-environ
One less dependency on `cranelift-codegen`!
* Remove `types` reexport from `wasmtime-environ`
Less cranelift!
* Remove `SourceLoc` from wasmtime-environ
Change the `srcloc`, `start_srcloc`, and `end_srcloc` fields to a custom
`FilePos` type instead of `ir::SourceLoc`. These are only used in a few
places so there's not much to lose from an extra abstraction for these
leaf use cases outside of cranelift.
* Remove wasmtime-environ's dep on cranelift's `StackMap`
This commit "clones" the `StackMap` data structure in to
`wasmtime-environ` to have an independent representation that that
chosen by Cranelift. This allows Wasmtime to decouple this runtime
dependency of stack map information and let the two evolve
independently, if necessary.
An alternative would be to refactor cranelift's implementation into a
separate crate and have wasmtime depend on that but it seemed a bit like
overkill to do so and easier to clone just a few lines for this.
* Define code offsets in wasmtime-environ with `u32`
Don't use Cranelift's `binemit::CodeOffset` alias to define this field
type since the `wasmtime-environ` crate will be losing the
`cranelift-codegen` dependency soon.
* Commit to using `cranelift-entity` in Wasmtime
This commit removes the reexport of `cranelift-entity` from the
`wasmtime-environ` crate and instead directly depends on the
`cranelift-entity` crate in all referencing crates. The original reason
for the reexport was to make cranelift version bumps easier since it's
less versions to change, but nowadays we have a script to do that.
Otherwise this encourages crates to use whatever they want from
`cranelift-entity` since we'll always depend on the whole crate.
It's expected that the `cranelift-entity` crate will continue to be a
lean crate in dependencies and suitable for use at both runtime and
compile time. Consequently there's no need to avoid its usage in
Wasmtime at runtime, since "remove Cranelift at compile time" is
primarily about the `cranelift-codegen` crate.
* Remove most uses of `cranelift-codegen` in `wasmtime-environ`
There's only one final use remaining, which is the reexport of
`TrapCode`, which will get handled later.
* Limit the glob-reexport of `cranelift_wasm`
This commit removes the glob reexport of `cranelift-wasm` from the
`wasmtime-environ` crate. This is intended to explicitly define what
we're reexporting and is a transitionary step to curtail the amount of
dependencies taken on `cranelift-wasm` throughout the codebase. For
example some functions used by debuginfo mapping are better imported
directly from the crate since they're Cranelift-specific. Note that
this is intended to be a temporary state affairs, soon this reexport
will be gone entirely.
Additionally this commit reduces imports from `cranelift_wasm` and also
primarily imports from `crate::wasm` within `wasmtime-environ` to get a
better sense of what's imported from where and what will need to be
shared.
* Extract types from cranelift-wasm to cranelift-wasm-types
This commit creates a new crate called `cranelift-wasm-types` and
extracts type definitions from the `cranelift-wasm` crate into this new
crate. The purpose of this crate is to be a shared definition of wasm
types that can be shared both by compilers (like Cranelift) as well as
wasm runtimes (e.g. Wasmtime). This new `cranelift-wasm-types` crate
doesn't depend on `cranelift-codegen` and is the final step in severing
the unconditional dependency from Wasmtime to `cranelift-codegen`.
The final refactoring in this commit is to then reexport this crate from
`wasmtime-environ`, delete the `cranelift-codegen` dependency, and then
update all `use` paths to point to these new types.
The main change of substance here is that the `TrapCode` enum is
mirrored from Cranelift into this `cranelift-wasm-types` crate. While
this unfortunately results in three definitions (one more which is
non-exhaustive in Wasmtime itself) it's hopefully not too onerous and
ideally something we can patch up in the future.
* Get lightbeam compiling
* Remove unnecessary dependency
* Fix compile with uffd
* Update publish script
* Fix more uffd tests
* Rename cranelift-wasm-types to wasmtime-types
This reflects the purpose a bit more where it's types specifically
intended for Wasmtime and its support.
* Fix publish script
Christopher Serr
Alex Crichton
Luna P-C
Nick Fitzgerald
wasmtime-publish
Andrew Brown
Pat Hickey
Olivier Lemasle