This commit extracts the two implementations of `Compiler` into two
separate crates, `wasmtime-cranelfit` and `wasmtime-lightbeam`. The
`wasmtime-jit` crate then depends on these two and instantiates them
appropriately. The goal here is to start reducing the weight of the
`wasmtime-environ` crate, which currently serves as a common set of
types between all `wasmtime-*` crates. Long-term I'd like to remove the
dependency on Cranelift from `wasmtime-environ`, but that's going to
take a lot more work.
In the meantime I figure it's a good way to get started by separating
out the lightbeam/cranelift function compilers from the
`wasmtime-environ` crate. We can continue to iterate on moving things
out in the future, too.
This CI test has been intermittently failing, which is causing issues
with other PRs. We should turn it back off until we can work out why the
intermittent failures are occuring.
As per Carlo Kok on Zulip #cranelift, this breaks builds with stable
Rust pre-1.43, as `core::u8::MAX` was only stabilized then. We'd like to
support older versions if we can easily do so.
This PR also adds `cranelift-tools` to the crates checked on CI with
Rust 1.41.0, which pulls in all backends (including `aarch64`).
This lets us avoid the cost of `cranelift_codegen::ir::Opcode` to
`peepmatic_runtime::Operator` conversion overhead, and paves the way for
allowing Peepmatic to support non-clif optimizations (e.g. vcode optimizations).
Rather than defining our own `peepmatic::Operator` type like we used to, now the
whole `peepmatic` crate is effectively generic over a `TOperator` type
parameter. For the Cranelift integration, we use `cranelift_codegen::ir::Opcode`
as the concrete type for our `TOperator` type parameter. For testing, we also
define a `TestOperator` type, so that we can test Peepmatic code without
building all of Cranelift, and we can keep them somewhat isolated from each
other.
The methods that `peepmatic::Operator` had are now translated into trait bounds
on the `TOperator` type. These traits need to be shared between all of
`peepmatic`, `peepmatic-runtime`, and `cranelift-codegen`'s Peepmatic
integration. Therefore, these new traits live in a new crate:
`peepmatic-traits`. This crate acts as a header file of sorts for shared
trait/type/macro definitions.
Additionally, the `peepmatic-runtime` crate no longer depends on the
`peepmatic-macro` procedural macro crate, which should lead to faster build
times for Cranelift when it is using pre-built peephole optimizers.
Instead, when the `rebuild-peephole-optimizers` feature is enabled, rebuild them
the first time they are used. This allows peepmatic to run when Cranelift's
`Opcode` is defined and available, which paves the way forward for:
* merging `peepmatic_runtime::operator::Operator` and Cranelift's `Opcode` (we
are wasting a bunch of cycles converting between the two of them), and
* supporting vcode optimizations in `peepmatic`.
This commit updates our CI to verify that all crates are publish-able at
all times on every commit. During the 0.19.0 release we found another
case where the crates as they live in this repository weren't
publish-able, so the hope is that this no longer comes up again!
The script added in this commit also takes the time/liberty to remove
the existing bump/publish scripts and instead replace them with one Rust
script originally sourced from wasm-bindgen. The intention of this
script is that it has three modes:
* `./publish bump` - bumps version numbers which are sent as a PR to get
reviewed (probably with a changelog as well)
* `./publish verify` - run on CI on every commit, builds every crate we
publish as if it's being published to crates.io, notably without raw
access to other crates in the repository.
* `./publish publish` - publishes all crates to crates.io, passing the
`--no-verify` flag to make this a much speedier process than it is
today.
* Switch CI back to nightly channel
I think all upstream issues are now fixed so we should be good to switch
back to nightly from our previously pinned version.
* Fix doc warnings
This commit adds a bit of a skeleton of what it might look like to
document the C API. Today the C API has virtually zero documentation
because the upstream documentation does not exist and we haven't put a
ton of effort into documenting our own extensions. Given that this is
one of the main vectors we expect users to use Wasmtime, we should make
sure it's thoroughly documented!
I've never really done much documentation generation of C myself before,
but I did a bit of searching and Doxygen seems reasonable proficient for
doing this. This commit sets up what it might look like for Doxygen to
be used for the C API. One nice feature of DOxygen is that we can
document the items in `wasm.h` without actually modifying `wasm.h`. For
those purposes a `doc-wasm.h` file was added here which is where we can
put Wasmtime-specific documentation about `wasm.h`.
There's quite a few functions in the C API so I didn't want to get them
all done before getting consensus on this. I've started some skeletons
of documentation for global types in `wasm.h` and also confirmed that
documentation works for our own `wasmtime.h` and such header files. If
this looks good to everyone and it runs reasonable well on CI then I can
spend more time filling out the rest of the documentation.
Also add configuration to CI to fail doc generation if any links are
broken. Unfortunately we can't blanket deny all warnings in rustdoc
since some are unconditional warnings, but for now this is hopefully
good enough.
Closes#1947
* This PR is against a branch called `main`
* Internally all docs/CI/etc is updated
* The default branch of the repo is now `main`
* All active PRs have been updated to retarget `main`
Closes#1914
* Enable the spec::simd::simd_align test for AArch64
Copyright (c) 2020, Arm Limited.
* Disable static memory under QEMU on CI
This commit disables the usage of "static" memory on CI and instead
forces all memories to be "dynamic" meaning that they reserve much
smaller chunks of memory. This causes the QEMU process's memory to
drastically drop (10GiB -> 600MiB) and should allow us to keep enabling
tests without hitting the OOM killer on CI.
Closes#1871 (includes that)
Closes#1893
* Fix typo
Co-authored-by: Anton Kirilov <anton.kirilov@arm.com>
* Pin nightlies to previous night
Fixes some upstream breakage in rust-lang/rust which should get fixed
tomorrow.
* fix-0.65
Co-authored-by: Yury Delendik <ydelendik@mozilla.com>
When we vendor Cranelift into Firefox, we need to be able to build with
the Firefox CI setup (unless we carry patches on top of upstream).
Unfortunately, the Firefox CI currently appears to build with a slightly
older version of Rust: I can't work out which version exactly, but one
without stable support for `matches!()`.
A recent attempt to version-bump Cranelift failed with build errors at
the two locations in this patch:
https://treeherder.mozilla.org/logviewer.html#/jobs?job_id=305994046&repo=autoland&lineNumber=24829
I also see a bunch of uses of `matches!()` in Peepmatic, but those
crates are not built by Firefox, so we can leave them be for now, I
think.
* CI: Only build fuzz targets, don't run them over the corpora
We've only ever caught a single potential regression by running the fuzz targets
over a sample of their corpora. However, this is also our slowest CI
job. Running the fuzz targets over their corpora simply isn't paying for itself.
Instead, just ensure that we can build the fuzz targets with `cargo fuzz` and
all of the libFuzzer and sanitizer instrumentation that it enables. This will
ensure that we don't break the fuzz targets, and we leave finding regressions in
the fuzz corpora to oss-fuzz.
* fuzz: feature gate peepmatic's fuzz targets
This makes it so that the CI's fuzz target-building job doesn't build peepmatic,
and transitively Z3.
* CI: only test `peepmatic` in one job
This avoids building Z3 in most jobs, which saves CI time.
* Fix curl syntax on Windows
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
This updates our github actions configuration with a new feature
released which allows configuring the default shell for the entire
worflow. Here we set that to `bash` since we frequently do that anyway
and it helps keep syntax consistent throughout the configuration file.
The `wasmtime` crate currently lives in `crates/api` for historical
reasons, because we once called it `wasmtime-api` crate. This creates a
stumbling block for new contributors.
As discussed on Zulip, rename the directory to `crates/wasmtime`.
This removes the `--nocapture` argument from Rust tests which enables
capturing the output of tests by default, only printing the output if
the test fails. I've seen that this otherwise seems to largely just dump
a very large amount of information to CI and makes it difficult to
diagnose a failure quickly from CI logs since you have to search
backwards to find the reason something failed.
This commit extends our CI to produce release artifacts for the
x86_64-pc-windows-gnu target. This was originally motivate by the [go
extension] where it looks like the Go toolchain primarily interoperates
with MinGW, not with MSVC natively.
The support here turned out to be quite trivial, largely just adding the
configuration to make the release. I don't think we should necessarily
commit to this being a primary platform for Wasmtime at this time
though. If the support here regresses in the future for a
difficult-to-fix reason I think it would be fine to back out the
platform at least temporarily.
Note that this does not add a full test suite for the MinGW target, only
a release builder. This release builder does run tests, but not with
full debug assertions enabled.
[go extension]: https://github.com/bytecodealliance/wasmtime-go/issues/3Closes#1535
* Add AArch64 tests to CI
This commit enhances our CI with an AArch64 builder. Currently we have
no physical hardware to run on so for now we run all tests in an
emulator. The AArch64 build is cross-compiled from x86_64 from Linux.
Tests all happen in release mode with a recent version of QEMU (recent
version because it's so much faster, and in release mode because debug
mode tests take quite a long time in an emulator).
The goal here was not to get all tests passing on CI, but rather to get
AArch64 running on CI and get it green at the same time. To achieve that
goal many tests are now ignored on aarch64 platforms. Many tests fail
due to unimplemented functionality in the aarch64 backend (#1521), and
all wasmtime tests involving compilation are also disabled due to
panicking attempting to generate generate instruction offset information
for trap symbolication (#1523).
Despite this, though, all Cranelift tests and other wasmtime tests
should be runnin on AArch64 through QEMU with this PR. Additionally
we'll have an AArch64 binary release of Wasmtime for Linux, although it
won't be too useful just yet since it will panic on almost all wasm
modules.
* Review comments
* Move most wasmtime tests into one test suite
This commit moves most wasmtime tests into a single test suite which
gets compiled into one executable instead of having lots of test
executables. The goal here is to reduce disk space on CI, and this
should be achieved by having fewer executables which means fewer copies
of `libwasmtime.rlib` linked across binaries on the system. More
importantly though this means that DWARF debug information should only
be in one executable rather than duplicated across many.
* Share more build caches
Globally set `RUSTFLAGS` to `-Dwarnings` instead of individually so all
build steps share the same value.
* Allow some dead code in cranelift-codegen
Prevents having to fix all warnings for all possible feature
combinations, only the main ones which come up.
* Update some debug file paths
We don't need full debug information but rather line tables
(debuginfo=1) should suffice for backtraces if truly necessary. Note
that this doesn't actually work on stable Rust just yet due to it being
an unrelease feature of Cargo. With the Rust release next week though
this'll work on all of stable/beta/nightly.
This commit removes the .NET implementation from Wasmtime.
It now exists at https://github.com/bytecodealliance/wasmtime-dotnet.
Also updates the Wasmtime book to include information about using Wasmtime from
.NET.
Benjamin Bouvier
Nick Fitzgerald
Chris Fallin
Pat Hickey
Alex Crichton
Yury Delendik
Johnnie Birch
Josh Triplett
Gabor Greif
Andrew Brown
Peter Huene