<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
- I fixed the TODO to use the `log` crate instead of `eprintln`
- Set the rust-version in the `scripts/check.sh` to the same as egui is
on
- I made xtask use anyhow to remove some unwraps
* [x] I have followed the instructions in the PR template
Note this will break people depending on eframe or egui-wgpu with
--no-default-features.
I don't know what to do about that to be honest.
* Closes#4914
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
Before making this PR, I did take notice of a similar PR,
https://github.com/emilk/egui/pull/4833, but as it appears to be
abandoned, I decided to make this PR.
**Missing**
One of the checks doesn't pass as wgpu still uses glow `0.13.1`
```shell
cargo deny --all-features --log-level error --target aarch64-apple-darwin check
```
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
eframe now has its own logic to find the storage_dir to persist the app
when the persistence feature is enabled, instead of using the
directories crate. The directory should be the same as before (verified
with a unit test).
* Closes <https://github.com/emilk/egui/issues/4884>
* [x] I have followed the instructions in the PR template
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
I removed (I hope so) all wildcard imports I found.
For me on my pc this improved the build time:
- for egui -5s
- for eframe -12s
* [x] I have followed the instructions in the PR template
This updates winit to 0.30.5.
https://github.com/emilk/egui/pull/4849 Had to pin the version to
0.30.2, as a Winit patch changed the behavior of selecting a theme.
Winit 0.30.5 reverts this, so we could stick with `window.theme()`, but
the newly added `ActiveEventLoop::system_theme` is more like what egui
wants anyway, as individual windows can have theme overrides.
Also bump `smithay-clipboard` to prevent some now duplicate
dependencies.
This allows license checking tools to omit the OFL and UFL licenses when
`default_fonts` are turned off.
There was some discussion of versioning on the original issue; I have
chosen to label this version as `0.28.1` to match the other crates.
Happy to adjust the version as needed.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes <https://github.com/emilk/egui/issues/2321>
* [X] I have followed the instructions in the PR template
---------
Co-authored-by: Alex Pinkus <pinkus@amazon.com>
* Closes https://github.com/emilk/egui/issues/1918
* Closes https://github.com/emilk/egui/issues/4437
* Closes https://github.com/emilk/egui/issues/4709
* [x] I have followed the instructions in the PR template
Hiya,
I need new winit for a specific fix for a android_native_actvity. There
are already two PRs, but both don't seem to have a lot of movement, or
are entirely complete:
https://github.com/emilk/egui/pull/4466
Seems to have gone stale & is missing some bits.
https://github.com/emilk/egui/pull/4702
Also seems stale (if less so), and is missing a refactor to
run_on_demand. I also *think* the accesskit integration has a mistake
and can't be enabled. I've marked them as a co-author on this as I
started from this branch. (I think! Haven't done that on git before...).
Sorry for the wall of text but just dumping some details / thoughts
here:
- There's an issue with creating child windows in winit 0.30.1 and up on
macOS. The multiple_viewports, "create immediate viewport" example
crashes on anything later 0.30.1, with a stack overflow in unsafe code.
I've create [a winit
issue](https://github.com/rust-windowing/winit/issues/3800), it *might*
already be fixed in 0.31.0 but I can't test as 0.31 will likely require
another refactoring. For now I have just pinned things to 0.30.0 exatly.
- Winit has deprecated run_on_demand, instead requiring the
ApplicationHandler interface. In 0.31.0 run_on_demand is removed. I've
refactored both the integration and the WinitApp trait to follow this
pattern. I've left user_events a bit more opaque, as it seems 0.31.0 is
doing a rework of UserEvents too.
- I've used the new lazy init approach for access kit from this branch
https://github.com/mwcampbell/egui/tree/accesskit-new-lazy-init and
marked Matt as co-author, thanks Matt!
- There was very similair but not quite the same code for run_and_return
and run_and_exit. I've merged them, but looking at the github issues
graveyard it seems vey finnicky. I *hope* this is more robust than
before but it's a bit scary.
- when receiving new_events this also used to check the redraw timing
dictionary. That doesn't seem necesarry so left this out, but that is a
slight behaviour change?
- I have reeneabled serial_windows on macOS. I wondered whether it was
fixed after this PR and does seem to be! However, even before this PR it
seems to work, so maybe winit has sorted things out before that...
Windows also works fine now without the extra hack.
- I've done a very basic test of AccessKit on Windows and screen reader
seems ok but I'm really not knowleadgable enough to say whether it's all
good or not.
- I've tested cargo tests & all examples on Windows & macOS, and ran a
basic Android app. Still, testing native platforms is wel... hard so if
anyone can test linux / iOs / older mac versions / windows 10 would
probably be a good idea!
- For consistencys sake I've made all event like functions in WinitApp
return a `Result<EventResult>`. There's quite a bit of Ok-wrapping now,
maybe too annoying? Not sure.
Thank you for having a look!
# Tested on
* [x] macOS
* [x] Windows
* [x] Wayland (thanks [SiebenCorgie](https://github.com/SiebenCorgie))
* [x] X11 (thanks
[crumblingstatue](https://github.com/crumblingstatue)!,
[SiebenCorgie](https://github.com/SiebenCorgie))
# TODO
* [x] Fix "follow system theme" not working on initial startup (winit
issue, pinning to 0.30.2 for now).
* [x] Fix `request_repaint_after`
---------
Co-authored-by: mwcampbell <mattcampbell@pobox.com>
Co-authored-by: j-axa <josef.axa@gmail.com>
Co-authored-by: DataTriny <datatriny@gmail.com>
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
A useful debug-feature in egui is pressing down all modifiers keys and
hovering any widget to see its backtrace (only in `dev` builds).
Unfortunately this is incompatible with `panic="abort"`, something I
just now discovered.
So I removed `panic="abort"` from `Cargo.toml` for `dev` builds. If the
backtrace returns empty-handed, I also suggests this as a fix to the
user. Finally, I cleaned up the backtraces a bit, making them slightly
shorter and more readable.
0.20 has a bunch of bugs that will be fixed by:
* https://github.com/gfx-rs/wgpu/pull/5681
At Rerun, we don't want to wait for the wgpu 0.20.1 patch release before
we update egui, so we will temporarily downgrade to wgpu 0.19
After reverting I'll open a new PR that will update to 0.20 again, with
the intention of merging that once 0.20.1 is released.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Inspired by:
44d65f41ac/Cargo.toml (L65)
I took the liberty of removing that comment since I *think* that I got
all "relevant" ones (showing up more than once, sort of).
updates the wgpu version to 0.20 and changes the API calls accordingly.
I had to update wasm-bindgen to "0.2.92". Otherwise, I got this error
for the demo app:
```
error: failed to select a version for `wasm-bindgen`.
... required by package `js-sys v0.3.69`
... which satisfies dependency `js-sys = "^0.3.69"` of package `eframe v0.27.2 (/home/user/Projects/egui/crates/eframe)`
... which satisfies path dependency `eframe` (locked to 0.27.2) of package `confirm_exit v0.1.0 (/home/user/Projects/egui/examples/confirm_exit)`
versions that meet the requirements `^0.2.92` are: 0.2.92
all possible versions conflict with previously selected packages.
previously selected package `wasm-bindgen v0.2.90`
... which satisfies dependency `wasm-bindgen = "=0.2.90"` of package `egui_demo_app v0.27.2 (/home/user/Projects/egui/crates/egui_demo_app)`
failed to select a version for `wasm-bindgen` which could resolve this conflict
```
Why is it locked to this version right now?
I ran the tests, checked the web demo and my own projects, and
everything seems to work fine with wgpu 0.20.
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
Motivation: I want to replace `cargo-cranky` with workspace lints, first
available in Rust 1.74.
However, `cargo doc` would hange on `wgpu` and `wgpu-core` on 1.74 and
1.75… so now we're on 1.76.
I think this is fine - when 1.78 is released next week we're still two
versions behind the bleeding edge.
…and the branch name is just wrong 🤦
Replaces only the cargo_deny.sh script for now. Can be expanded over
time to replace the other shell and python scripts, so only Rust is
needed to work with the repository.
Closes <https://github.com/emilk/egui/issues/2887>
Closes <https://github.com/emilk/egui/issues/4373>
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Closes https://github.com/emilk/egui/issues/3941
Workspace dependencies can be annoying.
If you don't set them to `default-features=false`, then you cannot opt
out of their default features anywhere else, and get warnings if you
try.
So you set `default-features=false`, and then you need to manually opt
in to the default features everywhere else.
Or, as in my case, don't.
I don't have the energy to do this tonight, so I'll just revert.
This should help slightly with CPU/GPU parallelism when vsync is on.
I also return the time spent on vsync, which can help users figure out
how much CPU wall-time was used on non-vsync stuff
This makes all `wgpu` features opt-in for `egui-wgpu` users.
For `eframe`, I opted to enable some `wgpu` features so users can still
use `eframe` without having to also opt-in to extra ewgpu features
(eframe is batteries-included).
Setting `desired_maximum_frame_latency` to a low value should
theoretically lead to lower latency in winit apps using `egui-wgpu`
(e.g. in `eframe` with `wgpu` backend).
* Replaces https://github.com/emilk/egui/pull/3714
* See also https://github.com/gfx-rs/wgpu/pull/4899
----
It seems like `desired_maximum_frame_latency` has no effect on my Mac. I
lowered my monitor refresh-rate to 30Hz to test, and can see no
difference between `desired_maximum_frame_latency` of `0` or `3`.
Before when experimenting with changing the global `DESIRED_NUM_FRAMES`
in `wgpu` I saw a huge difference, so I wonder what has changed.
I verified that `set_maximum_drawable_count` is being called with either
`1` or `2`, but I perceive no difference between the two.
Emil Ernerfeldt
Nicolas
9SMTM6
YgorSouza
Andreas Reich
Arthur Brussee
Alex Pinkus
Arthur Brussee
Simon Niedermayr
hellodword
Oscar Gustafsson