qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
#include <stdint.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <malloc.h>
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
|
|
|
|
#include "py/nlr.h"
|
|
|
|
#include "py/obj.h"
|
|
|
|
#include "py/compile.h"
|
|
|
|
#include "py/runtime0.h"
|
|
|
|
#include "py/runtime.h"
|
|
|
|
#include "py/stackctrl.h"
|
|
|
|
#include "py/gc.h"
|
|
|
|
#include "py/repl.h"
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
|
|
|
|
#include "tinytest.h"
|
|
|
|
#include "tinytest_macros.h"
|
|
|
|
|
|
|
|
void do_str(const char *src);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
inline void do_str(const char *src) {
|
|
|
|
mp_lexer_t *lex = mp_lexer_new_from_str_len(MP_QSTR__lt_stdin_gt_, src, strlen(src), 0);
|
|
|
|
if (lex == NULL) {
|
|
|
|
tt_abort_msg("Lexer initialization error");
|
|
|
|
}
|
|
|
|
|
|
|
|
nlr_buf_t nlr;
|
|
|
|
if (nlr_push(&nlr) == 0) {
|
|
|
|
qstr source_name = lex->source_name;
|
|
|
|
mp_parse_tree_t parse_tree = mp_parse(lex, MP_PARSE_FILE_INPUT);
|
|
|
|
mp_obj_t module_fun = mp_compile(&parse_tree, source_name, MP_EMIT_OPT_NONE, true);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
mp_call_function_0(module_fun);
|
|
|
|
nlr_pop();
|
|
|
|
} else {
|
|
|
|
mp_obj_t exc = (mp_obj_t)nlr.ret_val;
|
|
|
|
if (mp_obj_is_subclass_fast(mp_obj_get_type(exc), &mp_type_SystemExit)) {
|
|
|
|
// Assume that sys.exit() is called to skip the test.
|
|
|
|
// TODO: That can be always true, we should set up convention to
|
|
|
|
// use specific exit code as skip indicator.
|
|
|
|
tinytest_set_test_skipped_();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
mp_obj_print_exception(&mp_plat_print, exc);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
tt_abort_msg("Uncaught exception");
|
|
|
|
}
|
|
|
|
end:
|
|
|
|
;
|
|
|
|
}
|
|
|
|
|
|
|
|
#include "genhdr/tests.h"
|
|
|
|
|
|
|
|
int main() {
|
|
|
|
const char a[] = {"sim"};
|
|
|
|
mp_stack_set_limit(10240);
|
|
|
|
void *heap = malloc(256 * 1024);
|
|
|
|
gc_init(heap, (char*)heap + 256 * 1024);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
mp_init();
|
|
|
|
int r = tinytest_main(1, (const char **) a, groups);
|
|
|
|
mp_deinit();
|
|
|
|
printf( "status: %i\n", r);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
void gc_collect(void) {
|
|
|
|
gc_collect_start();
|
|
|
|
|
|
|
|
// get the registers and the sp
|
|
|
|
jmp_buf env;
|
|
|
|
setjmp(env);
|
|
|
|
volatile mp_uint_t dummy;
|
|
|
|
void *sp = (void*)&dummy;
|
|
|
|
|
|
|
|
// trace the stack, including the registers (since they live on the stack in this function)
|
|
|
|
gc_collect_root((void**)sp, ((uint32_t)MP_STATE_VM(stack_top) - (uint32_t)sp) / sizeof(uint32_t));
|
|
|
|
|
|
|
|
gc_collect_end();
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
}
|
|
|
|
|
|
|
|
mp_lexer_t *mp_lexer_new_from_file(const char *filename) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
mp_import_stat_t mp_import_stat(const char *path) {
|
|
|
|
return MP_IMPORT_STAT_NO_EXIST;
|
|
|
|
}
|
|
|
|
|
|
|
|
mp_obj_t mp_builtin_open(uint n_args, const mp_obj_t *args, mp_map_t *kwargs) {
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
return mp_const_none;
|
|
|
|
}
|
|
|
|
MP_DEFINE_CONST_FUN_OBJ_KW(mp_builtin_open_obj, 1, mp_builtin_open);
|
qemu-arm: fully integrated test suite.
This is primarily intended to provide testing of Thumb-specific code within
Travis CI as well as if anyone else want to run it locally. As discussed in
purposes. This is currently agains an emulated Cortex-M3 core, however in
the near future it can extended to support M0, M0+ as well M4 (work in
progress exists in sushihangover/qemu).
It's probably true that most of the code base can be covered running uPy
natively on a POSIX system, however we do have the tiny bit of assembly
code. There may exist bugs related to endianness and type aliases, let
alone potential standard library or compiler bugs or even
architecture-specific optimisations.
This could also incorporate lwIP (or other TCP/IP stack) integration as well
as SDIO+FATFS drivers.
The solution to inline the test cases was chose due to simplicity. It could
alternatively be implemented in a number of different way (see #515), but
this looked the simplest.
Inclusion of tinytest was just to avoid writing boilerplate code for
counting failed tests and other utility functions. Currently only a few
functions are used, however this could be extended. Checking in the code
instead of using submodule was a personal preference, but if people do want
the pain of submodules, this can provided. This particular framework is
also pretty good if one desires to run unit test on target. The approach
with scripts being inlined is probably not quite suited for the size of
memory an MCU has, but the tinytest itself should be good, if lower-level C
code is to be unit tested.
11 years ago
|
|
|
|
|
|
|
void nlr_jump_fail(void *val) {
|
|
|
|
}
|