micropython/tests/pyb/uart.py.exp

ValueError -1
ValueError 0
UART 1
UART 2
UART 3
UART 4
ValueError 5
UART 6
ValueError 7
UART XA
UART XB
UART YA
UART YB
ValueError Z
UART(1, baudrate=9600, bits=8, parity=None, stop=1, timeout=1000, timeout_char=2, read_buf_len=64)
UART(1, baudrate=2400, bits=8, parity=None, stop=1, timeout=1000, timeout_char=6, read_buf_len=64)
0
3
4
None
1
4
None
None
tests: Add tests to create valid and invalid UART, I2C, SPI, CAN busses. 10 years ago			`ValueError -1`
			`ValueError 0`
			`UART 1`
			`UART 2`
			`UART 3`
			`UART 4`
			`ValueError 5`
			`UART 6`
			`ValueError 7`
			`UART XA`
			`UART XB`
			`UART YA`
			`UART YB`
			`ValueError Z`
stmhal: Make uart.write() function correctly for timeout=0. In non-blocking mode (timeout=0), uart.write() can now transmit all of its data without raising an exception. uart.read() also works correctly in this mode. As part of this patch, timout_char now has a minimum value which is long enough to transfer 1 character. Addresses issue #1533. 9 years ago			`UART(1, baudrate=9600, bits=8, parity=None, stop=1, timeout=1000, timeout_char=2, read_buf_len=64)`
			`UART(1, baudrate=2400, bits=8, parity=None, stop=1, timeout=1000, timeout_char=6, read_buf_len=64)`
stmhal: uart.any() function now returns number of bytes available. 9 years ago			`0`
stmhal: Overhaul UART class to use read/write, and improve it. UART object now uses a stream-like interface: read, readall, readline, readinto, readchar, write, writechar. Timeouts are configured when the UART object is initialised, using timeout and timeout_char keyword args. The object includes optional read buffering, using interrupts. You can set the buffer size dynamically using read_buf_len keyword arg. A size of 0 disables buffering. 10 years ago			`3`
			`4`
			`None`
stmhal: Make uart.write() function correctly for timeout=0. In non-blocking mode (timeout=0), uart.write() can now transmit all of its data without raising an exception. uart.read() also works correctly in this mode. As part of this patch, timout_char now has a minimum value which is long enough to transfer 1 character. Addresses issue #1533. 9 years ago			`1`
			`4`
			`None`
			`None`