micropython/docs/library/pyb.ADC.rst

.. _pyb.ADC:

class ADC -- analog to digital conversion
=========================================

.. only:: port_pyboard

    Usage::

        import pyb
    
        adc = pyb.ADC(pin)              # create an analog object from a pin
        val = adc.read()                # read an analog value
    
        adc = pyb.ADCAll(resolution)    # creale an ADCAll object
        val = adc.read_channel(channel) # read the given channel
        val = adc.read_core_temp()      # read MCU temperature
        val = adc.read_core_vbat()      # read MCU VBAT
        val = adc.read_core_vref()      # read MCU VREF

Constructors
------------


.. only:: port_pyboard

    .. class:: pyb.ADC(pin)

       Create an ADC object associated with the given pin.
       This allows you to then read analog values on that pin.

Methods
-------

.. only:: port_pyboard

    .. method:: adc.read()

       Read the value on the analog pin and return it.  The returned value
       will be between 0 and 4095.

    .. method:: adc.read_timed(buf, timer)
    
       Read analog values into ``buf`` at a rate set by the ``timer`` object.

       ``buf`` can be bytearray or array.array for example.  The ADC values have
       12-bit resolution and are stored directly into ``buf`` if its element size is
       16 bits or greater.  If ``buf`` has only 8-bit elements (eg a bytearray) then
       the sample resolution will be reduced to 8 bits.

       ``timer`` should be a Timer object, and a sample is read each time the timer
       triggers.  The timer must already be initialised and running at the desired
       sampling frequency.

       To support previous behaviour of this function, ``timer`` can also be an
       integer which specifies the frequency (in Hz) to sample at.  In this case
       Timer(6) will be automatically configured to run at the given frequency.

       Example using a Timer object (preferred way)::

           adc = pyb.ADC(pyb.Pin.board.X19)    # create an ADC on pin X19
           tim = pyb.Timer(6, freq=10)         # create a timer running at 10Hz
           buf = bytearray(100)                # creat a buffer to store the samples
           adc.read_timed(buf, tim)            # sample 100 values, taking 10s

       Example using an integer for the frequency::

           adc = pyb.ADC(pyb.Pin.board.X19)    # create an ADC on pin X19
           buf = bytearray(100)                # create a buffer of 100 bytes
           adc.read_timed(buf, 10)             # read analog values into buf at 10Hz
                                               #   this will take 10 seconds to finish
           for val in buf:                     # loop over all values
               print(val)                      # print the value out

       This function does not allocate any memory.

The ADCAll Object
-----------------

Instantiating this changes all ADC pins to analog inputs. It is possible to read the
MCU temperature, VREF and VBAT without using ADCAll. The raw data can be accessed on
ADC channels 16, 17 and 18 respectively. However appropriate scaling will need to be applied.