cc3200: Add parameter to wlan_stop() for custom timeout values.

cc3200/mods/modpyb.c

@@ -82,11 +82,8 @@ extern OsiTaskHandle    xSimpleLinkSpawnTaskHndl;
 /// Resets the pyboard in a manner similar to pushing the external RESET
 /// button.
 STATIC mp_obj_t pyb_hard_reset(void) {
-#if (MICROPY_PORT_HAS_TELNET || MICROPY_PORT_HAS_FTP)
-    // disable wlan services
-    wlan_stop_servers();
-#endif
-    wlan_stop();
+    // disable wlan
+    wlan_stop(SL_STOP_TIMEOUT_LONG);
     // perform a SoC reset
     PRCMSOCReset();
     return mp_const_none;

cc3200/mods/modwlan.c

@@ -529,7 +529,7 @@ void wlan_update(void) {
 }
 
 // call this function to disable the complete WLAN subsystem before a system reset
-void wlan_stop (void) {
+void wlan_stop (uint32_t timeout) {
     if (wlan_obj.mode >= 0) {
 #if (MICROPY_PORT_HAS_TELNET || MICROPY_PORT_HAS_FTP)
         // Stop all other processes using the wlan engine
@@ -539,7 +539,7 @@ void wlan_stop (void) {
 #endif
         sl_LockObjLock (&wlan_LockObj, SL_OS_WAIT_FOREVER);
         wlan_obj.mode = -1;
-        sl_Stop(SL_STOP_TIMEOUT);
+        sl_Stop(MAX(timeout, SL_STOP_TIMEOUT));
     }
 }
 

cc3200/mods/modwlan.h

@@ -33,6 +33,7 @@
 #define SIMPLELINK_SPAWN_TASK_PRIORITY              3
 #define SIMPLELINK_TASK_STACK_SIZE                  2048
 #define SL_STOP_TIMEOUT                             35
+#define SL_STOP_TIMEOUT_LONG                        255
 
 /******************************************************************************
  DEFINE TYPES
@@ -56,7 +57,7 @@ extern void wlan_init0 (void);
 extern modwlan_Status_t wlan_sl_enable (SlWlanMode_t mode, const char *ssid, uint8_t ssid_len, uint8_t sec,
                                         const char *key, uint8_t key_len, uint8_t channel);
 extern void wlan_first_start (void);
-extern void wlan_stop (void);
+extern void wlan_stop (uint32_t timeout);
 extern void wlan_get_mac (uint8_t *macAddress);
 extern void wlan_get_ip (uint32_t *ip);
 extern void wlan_stop_servers (void);

cc3200/mods/pybpin.c

@@ -331,12 +331,12 @@ STATIC void pin_extint_enable (mp_obj_t self_in) {
             MAP_PRCMHibernateWakeupSourceDisable(hib_pin);
         }
     }
-    // if idx is invalid, the the pin supports active interrupts for sure
+    // if idx is invalid, the pin supports active interrupts for sure
     if (idx >= PYBPIN_NUM_WAKE_PINS || pybpin_wake_pin[idx].active) {
         MAP_GPIOIntClear(self->port, self->bit);
         MAP_GPIOIntEnable(self->port, self->bit);
     }
-    // in case in was enabled before
+    // in case it was enabled before
     else if (idx < PYBPIN_NUM_WAKE_PINS && !pybpin_wake_pin[idx].active) {
         MAP_GPIOIntDisable(self->port, self->bit);
     }

cc3200/mods/pybsleep.c

@@ -613,7 +613,7 @@ STATIC mp_obj_t pyb_sleep_hibernate (mp_obj_t self_in) {
             return mp_const_none;
         }
     }
-    wlan_stop();
+    wlan_stop(SL_STOP_TIMEOUT);
     pybsleep_flash_powerdown();
     MAP_PRCMHibernateEnter();
     return mp_const_none;

cc3200/mptask.c

@@ -246,9 +246,8 @@ soft_reset_exit:
     // wait for all bus transfers to complete
     HAL_Delay(50);
 
-    // disable wlan services
-    wlan_stop_servers();
-    wlan_stop();
+    // disable wlan
+    wlan_stop(SL_STOP_TIMEOUT_LONG);
 
     // de-initialize the stdio uart
     if (pyb_stdio_uart) {