|
|
|
@ -0,0 +1,421 @@ |
|
|
|
/**
|
|
|
|
****************************************************************************** |
|
|
|
* @file stm32l4xx_hal_conf.h |
|
|
|
* @brief HAL configuration file. |
|
|
|
****************************************************************************** |
|
|
|
* @attention |
|
|
|
* |
|
|
|
* <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2> |
|
|
|
* |
|
|
|
* Redistribution and use in source and binary forms, with or without modification, |
|
|
|
* are permitted provided that the following conditions are met: |
|
|
|
* 1. Redistributions of source code must retain the above copyright notice, |
|
|
|
* this list of conditions and the following disclaimer. |
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice, |
|
|
|
* this list of conditions and the following disclaimer in the documentation |
|
|
|
* and/or other materials provided with the distribution. |
|
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors |
|
|
|
* may be used to endorse or promote products derived from this software |
|
|
|
* without specific prior written permission. |
|
|
|
* |
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
|
|
* |
|
|
|
****************************************************************************** |
|
|
|
*/ |
|
|
|
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/ |
|
|
|
#ifndef __STM32L4xx_HAL_CONF_H |
|
|
|
#define __STM32L4xx_HAL_CONF_H |
|
|
|
|
|
|
|
#ifdef __cplusplus |
|
|
|
extern "C" { |
|
|
|
#endif |
|
|
|
|
|
|
|
/* Exported types ------------------------------------------------------------*/ |
|
|
|
/* Exported constants --------------------------------------------------------*/ |
|
|
|
|
|
|
|
/* ########################## Module Selection ############################## */ |
|
|
|
/**
|
|
|
|
* @brief This is the list of modules to be used in the HAL driver |
|
|
|
*/ |
|
|
|
|
|
|
|
#define HAL_MODULE_ENABLED |
|
|
|
#define HAL_ADC_MODULE_ENABLED |
|
|
|
/*#define HAL_CRYP_MODULE_ENABLED */ |
|
|
|
#define HAL_CAN_MODULE_ENABLED |
|
|
|
/* #define HAL_COMP_MODULE_ENABLED */ |
|
|
|
/* #define HAL_CRC_MODULE_ENABLED */ |
|
|
|
/* #define HAL_CRYP_MODULE_ENABLED */ |
|
|
|
#define HAL_DAC_MODULE_ENABLED |
|
|
|
/* #define HAL_DCMI_MODULE_ENABLED */ |
|
|
|
/*#define HAL_DMA2D_MODULE_ENABLED */ |
|
|
|
/* #define HAL_DFSDM_MODULE_ENABLED */ |
|
|
|
/*#define HAL_DSI_MODULE_ENABLED */ |
|
|
|
/*#define HAL_FIREWALL_MODULE_ENABLED */ |
|
|
|
/*#define HAL_GFXMMU_MODULE_ENABLED */ |
|
|
|
/*#define HAL_HCD_MODULE_ENABLED */ |
|
|
|
/*#define HAL_HASH_MODULE_ENABLED */ |
|
|
|
/*#define HAL_I2S_MODULE_ENABLED */ |
|
|
|
/*#define HAL_IRDA_MODULE_ENABLED */ |
|
|
|
/*#define HAL_IWDG_MODULE_ENABLED */ |
|
|
|
/*#define HAL_LTDC_MODULE_ENABLED */ |
|
|
|
/*#define HAL_LCD_MODULE_ENABLED */ |
|
|
|
/*#define HAL_LPTIM_MODULE_ENABLED */ |
|
|
|
/*#define HAL_NAND_MODULE_ENABLED */ |
|
|
|
/*#define HAL_NOR_MODULE_ENABLED */ |
|
|
|
/*#define HAL_OPAMP_MODULE_ENABLED */ |
|
|
|
/*#define HAL_OSPI_MODULE_ENABLED */ |
|
|
|
#define HAL_PCD_MODULE_ENABLED |
|
|
|
#define HAL_RNG_MODULE_ENABLED |
|
|
|
#define HAL_RTC_MODULE_ENABLED |
|
|
|
/* #define HAL_SAI_MODULE_ENABLED */ |
|
|
|
#define HAL_SD_MODULE_ENABLED |
|
|
|
/* #define HAL_SMBUS_MODULE_ENABLED */ |
|
|
|
/* #define HAL_SMARTCARD_MODULE_ENABLED */ |
|
|
|
#define HAL_SPI_MODULE_ENABLED |
|
|
|
/*#define HAL_SRAM_MODULE_ENABLED */ |
|
|
|
/*#define HAL_SWPMI_MODULE_ENABLED */ |
|
|
|
#define HAL_TIM_MODULE_ENABLED |
|
|
|
/*#define HAL_TSC_MODULE_ENABLED */ |
|
|
|
#define HAL_UART_MODULE_ENABLED |
|
|
|
/*#define HAL_USART_MODULE_ENABLED */ |
|
|
|
/*#define HAL_WWDG_MODULE_ENABLED */ |
|
|
|
#define HAL_GPIO_MODULE_ENABLED |
|
|
|
#define HAL_I2C_MODULE_ENABLED |
|
|
|
#define HAL_DMA_MODULE_ENABLED |
|
|
|
#define HAL_RCC_MODULE_ENABLED |
|
|
|
#define HAL_FLASH_MODULE_ENABLED |
|
|
|
#define HAL_PWR_MODULE_ENABLED |
|
|
|
#define HAL_CORTEX_MODULE_ENABLED |
|
|
|
|
|
|
|
/* ########################## Oscillator Values adaptation ####################*/ |
|
|
|
/**
|
|
|
|
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application. |
|
|
|
* This value is used by the RCC HAL module to compute the system frequency |
|
|
|
* (when HSE is used as system clock source, directly or through the PLL). |
|
|
|
*/ |
|
|
|
#if !defined (HSE_VALUE) |
|
|
|
#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ |
|
|
|
#endif /* HSE_VALUE */ |
|
|
|
|
|
|
|
#if !defined (HSE_STARTUP_TIMEOUT) |
|
|
|
#define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ |
|
|
|
#endif /* HSE_STARTUP_TIMEOUT */ |
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief Internal Multiple Speed oscillator (MSI) default value. |
|
|
|
* This value is the default MSI range value after Reset. |
|
|
|
*/ |
|
|
|
#if !defined (MSI_VALUE) |
|
|
|
#define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ |
|
|
|
#endif /* MSI_VALUE */ |
|
|
|
/**
|
|
|
|
* @brief Internal High Speed oscillator (HSI) value. |
|
|
|
* This value is used by the RCC HAL module to compute the system frequency |
|
|
|
* (when HSI is used as system clock source, directly or through the PLL). |
|
|
|
*/ |
|
|
|
#if !defined (HSI_VALUE) |
|
|
|
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ |
|
|
|
#endif /* HSI_VALUE */ |
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. |
|
|
|
* This internal oscillator is mainly dedicated to provide a high precision clock to |
|
|
|
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. |
|
|
|
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency |
|
|
|
* which is subject to manufacturing process variations. |
|
|
|
*/ |
|
|
|
#if !defined (HSI48_VALUE) |
|
|
|
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. |
|
|
|
The real value my vary depending on manufacturing process variations.*/ |
|
|
|
#endif /* HSI48_VALUE */ |
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief Internal Low Speed oscillator (LSI) value. |
|
|
|
*/ |
|
|
|
#if !defined (LSI_VALUE) |
|
|
|
#define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ |
|
|
|
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
|
|
|
The real value may vary depending on the variations |
|
|
|
in voltage and temperature. */ |
|
|
|
/**
|
|
|
|
* @brief External Low Speed oscillator (LSE) value. |
|
|
|
* This value is used by the UART, RTC HAL module to compute the system frequency |
|
|
|
*/ |
|
|
|
#if !defined (LSE_VALUE) |
|
|
|
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ |
|
|
|
#endif /* LSE_VALUE */ |
|
|
|
|
|
|
|
#if !defined (LSE_STARTUP_TIMEOUT) |
|
|
|
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ |
|
|
|
#endif /* HSE_STARTUP_TIMEOUT */ |
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief External clock source for SAI1 peripheral |
|
|
|
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source |
|
|
|
* frequency. |
|
|
|
*/ |
|
|
|
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) |
|
|
|
#define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)48000) /*!< Value of the SAI1 External clock source in Hz*/ |
|
|
|
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ |
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief External clock source for SAI2 peripheral |
|
|
|
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source |
|
|
|
* frequency. |
|
|
|
*/ |
|
|
|
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) |
|
|
|
#define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000) /*!< Value of the SAI2 External clock source in Hz*/ |
|
|
|
#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ |
|
|
|
|
|
|
|
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
|
|
|
=== you can define the HSE value in your toolchain compiler preprocessor. */ |
|
|
|
|
|
|
|
/* ########################### System Configuration ######################### */ |
|
|
|
/**
|
|
|
|
* @brief This is the HAL system configuration section |
|
|
|
*/ |
|
|
|
#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ |
|
|
|
#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */ |
|
|
|
#define USE_RTOS 0 |
|
|
|
#define PREFETCH_ENABLE 1 |
|
|
|
#define INSTRUCTION_CACHE_ENABLE 1 |
|
|
|
#define DATA_CACHE_ENABLE 1 |
|
|
|
|
|
|
|
/* ########################## Assert Selection ############################## */ |
|
|
|
/**
|
|
|
|
* @brief Uncomment the line below to expanse the "assert_param" macro in the |
|
|
|
* HAL drivers code |
|
|
|
*/ |
|
|
|
/* #define USE_FULL_ASSERT 1 */ |
|
|
|
|
|
|
|
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
|
|
|
* Activated: CRC code is present inside driver |
|
|
|
* Deactivated: CRC code cleaned from driver |
|
|
|
*/ |
|
|
|
|
|
|
|
#define USE_SPI_CRC 0 |
|
|
|
|
|
|
|
/* Includes ------------------------------------------------------------------*/ |
|
|
|
/**
|
|
|
|
* @brief Include module's header file |
|
|
|
*/ |
|
|
|
|
|
|
|
#ifdef HAL_RCC_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_rcc.h" |
|
|
|
#include "stm32l4xx_hal_rcc_ex.h" |
|
|
|
#endif /* HAL_RCC_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_GPIO_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_gpio.h" |
|
|
|
#endif /* HAL_GPIO_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_DMA_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_dma.h" |
|
|
|
#endif /* HAL_DMA_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_DFSDM_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_dfsdm.h" |
|
|
|
#endif /* HAL_DFSDM_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_CORTEX_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_cortex.h" |
|
|
|
#endif /* HAL_CORTEX_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_ADC_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_adc.h" |
|
|
|
#endif /* HAL_ADC_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_CAN_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_can.h" |
|
|
|
#endif /* HAL_CAN_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_COMP_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_comp.h" |
|
|
|
#endif /* HAL_COMP_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_CRC_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_crc.h" |
|
|
|
#endif /* HAL_CRC_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_CRYP_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_cryp.h" |
|
|
|
#endif /* HAL_CRYP_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_DAC_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_dac.h" |
|
|
|
#endif /* HAL_DAC_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_DCMI_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_dcmi.h" |
|
|
|
#endif /* HAL_DCMI_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_DMA2D_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_dma2d.h" |
|
|
|
#endif /* HAL_DMA2D_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_DSI_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_dsi.h" |
|
|
|
#endif /* HAL_DSI_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_FIREWALL_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_firewall.h" |
|
|
|
#endif /* HAL_FIREWALL_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_FLASH_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_flash.h" |
|
|
|
#endif /* HAL_FLASH_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_HASH_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_hash.h" |
|
|
|
#endif /* HAL_HASH_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_SRAM_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_sram.h" |
|
|
|
#endif /* HAL_SRAM_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_NOR_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_nor.h" |
|
|
|
#endif /* HAL_NOR_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_NAND_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_nand.h" |
|
|
|
#endif /* HAL_NAND_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_I2C_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_i2c.h" |
|
|
|
#endif /* HAL_I2C_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_IWDG_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_iwdg.h" |
|
|
|
#endif /* HAL_IWDG_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_LCD_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_lcd.h" |
|
|
|
#endif /* HAL_LCD_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_LPTIM_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_lptim.h" |
|
|
|
#endif /* HAL_LPTIM_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_LTDC_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_ltdc.h" |
|
|
|
#endif /* HAL_LTDC_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_OPAMP_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_opamp.h" |
|
|
|
#endif /* HAL_OPAMP_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_OSPI_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_ospi.h" |
|
|
|
#endif /* HAL_OSPI_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_PWR_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_pwr.h" |
|
|
|
#endif /* HAL_PWR_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_QSPI_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_qspi.h" |
|
|
|
#endif /* HAL_QSPI_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_RNG_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_rng.h" |
|
|
|
#endif /* HAL_RNG_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_RTC_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_rtc.h" |
|
|
|
#endif /* HAL_RTC_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_SAI_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_sai.h" |
|
|
|
#endif /* HAL_SAI_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_SD_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_sd.h" |
|
|
|
#endif /* HAL_SD_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_SMBUS_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_smbus.h" |
|
|
|
#endif /* HAL_SMBUS_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_SPI_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_spi.h" |
|
|
|
#endif /* HAL_SPI_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_SWPMI_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_swpmi.h" |
|
|
|
#endif /* HAL_SWPMI_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_TIM_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_tim.h" |
|
|
|
#endif /* HAL_TIM_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_TSC_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_tsc.h" |
|
|
|
#endif /* HAL_TSC_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_UART_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_uart.h" |
|
|
|
#endif /* HAL_UART_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_USART_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_usart.h" |
|
|
|
#endif /* HAL_USART_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_IRDA_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_irda.h" |
|
|
|
#endif /* HAL_IRDA_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_smartcard.h" |
|
|
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_WWDG_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_wwdg.h" |
|
|
|
#endif /* HAL_WWDG_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_PCD_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_pcd.h" |
|
|
|
#endif /* HAL_PCD_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_HCD_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_hcd.h" |
|
|
|
#endif /* HAL_HCD_MODULE_ENABLED */ |
|
|
|
|
|
|
|
#ifdef HAL_GFXMMU_MODULE_ENABLED |
|
|
|
#include "stm32l4xx_hal_gfxmmu.h" |
|
|
|
#endif /* HAL_GFXMMU_MODULE_ENABLED */ |
|
|
|
|
|
|
|
/* Exported macro ------------------------------------------------------------*/ |
|
|
|
#ifdef USE_FULL_ASSERT |
|
|
|
/**
|
|
|
|
* @brief The assert_param macro is used for function's parameters check. |
|
|
|
* @param expr: If expr is false, it calls assert_failed function |
|
|
|
* which reports the name of the source file and the source |
|
|
|
* line number of the call that failed. |
|
|
|
* If expr is true, it returns no value. |
|
|
|
* @retval None |
|
|
|
*/ |
|
|
|
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) |
|
|
|
/* Exported functions ------------------------------------------------------- */ |
|
|
|
void assert_failed(uint8_t* file, uint32_t line); |
|
|
|
#else |
|
|
|
#define assert_param(expr) ((void)0U) |
|
|
|
#endif /* USE_FULL_ASSERT */ |
|
|
|
|
|
|
|
#ifdef __cplusplus |
|
|
|
} |
|
|
|
#endif |
|
|
|
|
|
|
|
#endif /* __STM32L4xx_HAL_CONF_H */ |
|
|
|
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
Tobias Badertscher
7 years ago
Damien George