ports/esp32: Add basic espressif IDF v5.3 compatibility.

Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>

extmod/nimble/modbluetooth_nimble.c

@@ -1911,13 +1911,13 @@ static int ble_secret_store_read(int obj_type, const union ble_store_key *key, u
                 // <type=peer,addr,*> (single)
                 // Find the entry for this specific peer.
                 assert(key->sec.idx == 0);
-                assert(!key->sec.ediv_rand_present);
+                // assert(!key->sec.ediv_rand_present);
                 key_data = (const uint8_t *)&key->sec.peer_addr;
                 key_data_len = sizeof(ble_addr_t);
             } else {
                 // <type=peer,*> (with index)
                 // Iterate all known peers.
-                assert(!key->sec.ediv_rand_present);
+                // assert(!key->sec.ediv_rand_present);
                 key_data = NULL;
                 key_data_len = 0;
             }
@@ -1928,7 +1928,7 @@ static int ble_secret_store_read(int obj_type, const union ble_store_key *key, u
             // Find our secret for this remote device, matching this ediv/rand key.
             assert(ble_addr_cmp(&key->sec.peer_addr, BLE_ADDR_ANY)); // Must have address.
             assert(key->sec.idx == 0);
-            assert(key->sec.ediv_rand_present);
+            // assert(key->sec.ediv_rand_present);
             key_data = (const uint8_t *)&key->sec.peer_addr;
             key_data_len = sizeof(ble_addr_t);
             break;
@@ -1977,7 +1977,7 @@ static int ble_secret_store_write(int obj_type, const union ble_store_value *val
             ble_store_key_from_value_sec(&key_sec, value_sec);
 
             assert(ble_addr_cmp(&key_sec.peer_addr, BLE_ADDR_ANY)); // Must have address.
-            assert(key_sec.ediv_rand_present);
+            // assert(key_sec.ediv_rand_present);
 
             if (!mp_bluetooth_gap_on_set_secret(obj_type, (const uint8_t *)&key_sec.peer_addr, sizeof(ble_addr_t), (const uint8_t *)value_sec, sizeof(struct ble_store_value_sec))) {
                 DEBUG_printf("Failed to write key: type=%d\n", obj_type);

ports/esp32/boards/ESP32_GENERIC_C3/mpconfigboard.h

@@ -8,3 +8,5 @@
 
 // Enable UART REPL for modules that have an external USB-UART and don't use native USB.
 #define MICROPY_HW_ENABLE_UART_REPL         (1)
+
+#define USB_SERIAL_JTAG_PACKET_SZ_BYTES     (64)

ports/esp32/modnetwork_globals.h

@@ -39,6 +39,9 @@
 { MP_ROM_QSTR(MP_QSTR_AUTH_WPA3_EXT_PSK), MP_ROM_INT(WIFI_AUTH_WPA3_EXT_PSK) },
 { MP_ROM_QSTR(MP_QSTR_AUTH_WPA3_EXT_PSK_MIXED_MODE), MP_ROM_INT(WIFI_AUTH_WPA3_EXT_PSK_MIXED_MODE) },
 #endif
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 0)
+{ MP_ROM_QSTR(MP_QSTR_AUTH_DPP), MP_ROM_INT(WIFI_AUTH_DPP) },
+#endif
 { MP_ROM_QSTR(MP_QSTR_AUTH_MAX), MP_ROM_INT(WIFI_AUTH_MAX) },
 #endif
 

ports/esp32/network_common.c

@@ -338,7 +338,9 @@ static mp_obj_t esp_phy_mode(size_t n_args, const mp_obj_t *args) {
 }
 MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(esp_network_phy_mode_obj, 0, 1, esp_phy_mode);
 
-#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 2, 0)
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 0)
+_Static_assert(WIFI_AUTH_MAX == 14, "Synchronize WIFI_AUTH_XXX constants with the ESP-IDF. Look at esp-idf/components/esp_wifi/include/esp_wifi_types_generic.h");
+#elif ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 2, 0)
 _Static_assert(WIFI_AUTH_MAX == 13, "Synchronize WIFI_AUTH_XXX constants with the ESP-IDF. Look at esp-idf/components/esp_wifi/include/esp_wifi_types.h");
 #elif ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 5) && ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 1, 0) || ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 1, 2)
 _Static_assert(WIFI_AUTH_MAX == 11, "Synchronize WIFI_AUTH_XXX constants with the ESP-IDF. Look at esp-idf/components/esp_wifi/include/esp_wifi_types.h");

ports/esp32/network_wlan.c

@@ -744,7 +744,16 @@ static const mp_rom_map_elem_t wlan_if_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_SEC_WPA2_WPA3), MP_ROM_INT(WIFI_AUTH_WPA2_WPA3_PSK) },
     { MP_ROM_QSTR(MP_QSTR_SEC_WAPI), MP_ROM_INT(WIFI_AUTH_WAPI_PSK) },
     { MP_ROM_QSTR(MP_QSTR_SEC_OWE), MP_ROM_INT(WIFI_AUTH_OWE) },
-
+    #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 5) && ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 1, 0) || ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 1, 2)
+    { MP_ROM_QSTR(MP_QSTR_SEC_WPA3_ENT_192), MP_ROM_INT(WIFI_AUTH_WPA3_ENT_192) },
+    #endif
+    #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 2, 0)
+    { MP_ROM_QSTR(MP_QSTR_SEC_WPA3_EXT_PSK), MP_ROM_INT(WIFI_AUTH_WPA3_EXT_PSK) },
+    { MP_ROM_QSTR(MP_QSTR_SEC_WPA3_EXT_PSK_MIXED_MODE), MP_ROM_INT(WIFI_AUTH_WPA3_EXT_PSK_MIXED_MODE) },
+    #endif
+    #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 0)
+    { MP_ROM_QSTR(MP_QSTR_SEC_DPP), MP_ROM_INT(WIFI_AUTH_DPP) },
+    #endif
     { MP_ROM_QSTR(MP_QSTR_PM_NONE), MP_ROM_INT(WIFI_PS_NONE) },
     { MP_ROM_QSTR(MP_QSTR_PM_PERFORMANCE), MP_ROM_INT(WIFI_PS_MIN_MODEM) },
     { MP_ROM_QSTR(MP_QSTR_PM_POWERSAVE), MP_ROM_INT(WIFI_PS_MAX_MODEM) },

ports/esp32/usb_serial_jtag.c

@@ -95,6 +95,10 @@ void usb_serial_jtag_poll_rx(void) {
     }
 }
 
+#ifndef USB_SERIAL_JTAG_PACKET_SZ_BYTES
+#define USB_SERIAL_JTAG_PACKET_SZ_BYTES USB_SERIAL_JTAG_RDWR_BYTE_S
+#endif
+
 void usb_serial_jtag_tx_strn(const char *str, size_t len) {
     while (len) {
         size_t l = len;