This updates the Ubuntu OS image the code size CI tasks run on, from
20.04-LTS to 22.04-LTS. This is needed because 20.04 didn't have
packages that are needed to build RISC-V 32 code.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Currently both the qemu-arm and qemu-riscv ports share a lot of code and
functionality. This commit merges the qemu-riscv port into the qemu-arm
port. The only real differences between the two are the toolchains used to
build the code, and the initialisation/startup framework. Everything else
is pretty much the same, so this brings the following benefits:
- less code duplication
- less burden on maintenance
- generalised qemu port, could in the future support other architectures
A new board `VIRT_RV32` has been added to the qemu-arm port which is the
existing RISC-V board from the qemu-riscv port. To build it:
$ make BOARD=VIRT_RV32 repl
To cleanly separate the code for the different architectures, startup code
has been moved to ports/qemu-arm/mcu/<arch>/.
Signed-off-by: Damien George <damien@micropython.org>
Currently, the qemu-arm (and qemu-riscv) port has two build modes:
- a simple test that executes a Python string; and
- a full test that uses tinytest to embed all tests within the firmware,
then executes that and captures the output.
This is very different to all the other ports. A difficulty with using
tinytest is that with the large number of tests the firmware overflows its
virtual flash size. It's also hard to run tests via .mpy files and with
the native emitter. Being different to the other ports also means an extra
burden on maintenance.
This commit reworks the qemu-arm port so that it has a single build target
that creates a standard firmware which has a REPL. When run under
qemu-system-arm, the REPL acts like any other bare-metal port, complete
with soft reset (use machine.reset() to turn it off and exit
qemu-system-arm).
This approach gives many benefits:
- allows playing with a REPL without hardware;
- allows running the test suite as it would on a bare-metal board, by
making qemu-system-arm redirect the UART serial of the virtual device to
a /dev/pts/xx file, and then running run-tests.py against that serial
device;
- skipping tests is now done via the logic in `run-tests.py` and no longer
needs multiple places to define which tests to skip
(`tools/tinytest-codegen.py`, `ports/qemu-arm/tests_profile.txt` and also
`tests/run-tests.py`);
- allows testing/using mpremote with the qemu-arm port.
Eventually the qemu-riscv port would have a similar change.
Prior to this commit the test results were:
743 tests ok. (121 skipped)
With this commit the test results are:
753 tests performed (22673 individual testcases)
753 tests passed
138 tests skipped
More tests are skipped because more are included in the run. But overall
more tests pass.
Signed-off-by: Damien George <damien@micropython.org>
With this change, the zephyr port is tested against the standard test suite
via the following scheme:
- the zephyr port is built with the `qemu_cortex_m3` board and the
`prj_minimal.conf` configuration
- `qemu-system-arm` runs `zephyr.elf`
- the zephyr console is redirected to a pts/pty
- `tests/run-tests.py` is run in bare-metal mode against the pts/pty device
This allows testing the zephyr port as though it were a physical board
attached over a serial port.
Signed-off-by: Damien George <damien@micropython.org>
Install the mingw variant of Python since it behaves more like a 'real'
Windows CPython than the msys2 variant: os.name == 'nt', not 'posix'. Note
that os.sep is still '/' though so we don't actually need to skip the
import_file test. This way one single Python version can be used both for
running run-tests.py and getting the expected test output.
Signed-off-by: stijn <stijn@ignitron.net>
macos-11.0 is no longer available.
With this change in the macos version, some tests which previously failed
now pass, and some different tests now fail. Exclude those that fail from
the CI until they can be fixed properly.
Signed-off-by: Damien George <damien@micropython.org>
Provides pull request submitters with contributor documentation, and
prompts them to provide relevant information about testing, and how they
came to implement this change.
Sections are deliberately small so they don't crowd out the GitHub Pull
Request description text field.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Update to the issue forms added earlier this year, that seem to generally
be working well. Improvements in this commit:
- No longer generates TODO checklists in new issues.
- Issue bodies (and therefore email previews) no longer start with the same
fixed checklist text for each new issue.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Allows giving more specific advice, provides more links to other places to
ask questions, check details, etc.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
All the other workflow YAML files use vertical whitespace around top-level
items.
Also remove spurious comment, the features in the linked doc aren't
actually used in this workflow (any more?).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Similar to ruff.yaml, it's simpler to run the codespell command directly
from a workflow file. And developers can run codespell directly from the
command line without the need for options, or just use pre-commit.
This commit also applies a specific version to codespell, same as
pre-commit (introduced in a166d805f4).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
By moving to GitHub actions, all MicroPython CI builds are now on GitHub
actions. This allows faster parallel builds and saves time by not building
when no relevant files changed.
This reveals a few failing tests, so those are temporarily disabled until
they can be fixed.
Signed-off-by: David Lechner <david@pybricks.com>
Signed-off-by: Damien George <damien@micropython.org>
CCaches are scoped per-job.
Uses https://github.com/hendrikmuhs/ccache-action to get desired behaviour
(updating the cache on each run).
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Allows splitting the esp32 job into multiple parts without too much
boilerplate. The matrix is parameterised using the name of the function to
call in tools/ci.sh, to minimise the dependency on GitHub Actions.
This can get esp32 build times down around 3m if IDF is cached already.
If the cache is cold, the cache preparation step on each job can double up
against each other. However, restructuring the workflow to not do this
seems either complex or requires copy-pasting the entire cache step.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Cache is keyed on the ESP-IDF version used in CI, so there shouldn't be any
cache invalidation issues when ESP-IDF version changes.
Restoring from cache takes approx 15s, compared to 2-3m to perform these
steps (ESP-IDF tools install, ESP-IDF clone, ESP-IDF submodule clone) the
first time.
Cache size is approx 1.6GB, the git clone is tweaked as much as possible to
keep the size down.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
- Add config for [tool.ruff.format] to pyproject.toml.
- Update pre-commit to run both ruff and ruff-format (and only check C
files when running codeformat.py)
- Update CI.
- Simplify codeformat.py to remove all the Python-specific logic (just run
"ruff format" directly).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This port is largely unmaintained, has limited features (the only hardware
support is for GPIO and timer, and no machine module), only supports a
small number of Teensy boards, and can be confused with the mimxrt support
for Teensy 4.x.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
This provides a way to enable features and changes slated for MicroPython
2.x, by running `make MICROPY_PREVIEW_VERSION_2=1`. Also supported for
the cmake ports (except Zephyr).
This is an alternative to having a 2.x development branch (or equivalently,
keeping a 1.x release branch). Any feature or change that needs to be
"hidden" until 2.x can use this flag (either in the Makefile or the
preprocessor).
A good example is changing function arguments or other public API features,
in particular to aid in improving consistency between ports.
When `MICROPY_PREVIEW_VERSION_2` is enabled, the REPL banner is amended to
say "MicroPython (with v2.0 preview) vX.Y.Z", and sys.implementation gets a
new field `_v2` set to `True`.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The `--format` flag was changed to `--output-format` in the recent update.
Pin to this version to prevent further updates from breaking (e.g. through
new rules or other changes).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- Fix URL for the unix badge.
- Add stm32 CI badge.
- Add docs CI badge (linking to the documentation)
- Make docs CI run on push (so we get a badge generated).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Instead of doing the shallow checkout followed by an unshallow-with-tags,
just set fetch-depth=0 to get the full history to start with.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Damien George
Alessandro Gatti
stijn
Angus Gratton
J. Neuschäfer
iabdalkader
Phil Howard
David Lechner
dependabot[bot]
Jim Mussared
Jos Verlinde
Christian Clauss