f6be480bda
stmhal: Add pyb.have_cdc function to check if USB CDC device is enabled.
11 years ago
6dba016a56
stmhal: Add pyb.wfi() function (calls __WFI).
11 years ago
0aab675108
stmhal: Little hack to dump GC allocation table using pyb.info().
Pass a single parameter (doesn't matter what): pyb.info(1), will dump
the GC alloc table.
11 years ago
8b0535e23f
py: Change module globals from mp_map_t* to mp_obj_dict_t*.
Towards addressing issue #424 .
Had a small increase to ROM usage (order 60 bytes).
11 years ago
df6567e634
Merge map.h into obj.h.
Pretty much everyone needs to include map.h, since it's such an integral
part of the Micro Python object implementation. Thus, the definitions
are now in obj.h instead. map.h is removed.
11 years ago
038df43183
stmhal: Implement selector for USB device mode; improve boot up.
Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID.
Choice is made by an option in boot.py, with default being CDC+MSC.
HID+MSC is not currently supported, but should be easy to implement.
Boot up now has ability to change the reset mode: hold down USR switch
while booting and LEDs will count from 1 to 7 to indicate the boot mode.
Release USR when correct mode is selected. Current modes are 1 (normal
boot), 2 (safe mode), 3 (reset FS mode).
11 years ago
64563e39b3
stmhal: Add CDC+HID USB device.
The HID device must appear before the CDC in order for both to work at
the same time.
Whilst the code is working, it's not currently used.
11 years ago
c9fd6645b0
stmhal: Factor out stdio and readline to separate files.
Adds readline_init() to clear readline history on soft reset. Addresses
issue #387 .
11 years ago
38f0c607b0
stmhal: Change Usart creation function to class make_new.
11 years ago
3021632501
stmhal: Shuffle around some init functions in main().
11 years ago
6cfda3084d
stmhal: Add I2C support; change accel driver to use new I2C.
11 years ago
caac542b23
Proper support for registering builtin modules in ROM.
Comes with some refactoring of code and renaming of files. All modules
are now named mod*.[ch].
11 years ago
da5e269e51
stmhal: Make pyb.ADC the ADC class (not a function).
11 years ago
1403298a65
stmhal - fixed up adc stuff
Added support for the ADC channels and mappings to make_pins.py
I'm not sure if the hal properly deals with the channel 16/18 differences
between the 40x and 42x. It seems to deal with it partially. This particular
aspect will need testing on a 42x or 43x.
11 years ago
b13492f8ad
stmhal: Add DAC driver.
11 years ago
0e9d96f18f
stmhal: Make Led, Servo and Accel their class, not a function.
11 years ago
9050b2ee33
stmhal: Improved interface to accelerometer.
11 years ago
02fa035800
stmhal: Add input() and pyb.input() functions.
11 years ago
626f6b8133
stmhal: Add servo driver.
11 years ago
684164a8cf
stmhal: Add PYBv10 config; add RNG support.
11 years ago
f78d9b1a72
stmhal: Add accelerometer driver; fix bug with LFN.
11 years ago
b92d3e1fde
stmhal: Add fatfs support, working with flash and SD card.
11 years ago
fb431bf556
stmhal: Add SD card support.
Just low-level read/write support. No filesystem yet.
11 years ago
9c122029ec
stmhal - Add usart support
11 years ago
8b96af6907
stmhal: Get RTC working.
11 years ago
ca5444e6cd
stmhal - add pin mapping, gpio, exti, usrsw
11 years ago
0a64c92a9c
stmhal - add led support. Add netduino_plus_2 support
Tweaked a couple of the USB files to compile if neither dev nor host was defined.
Tested on netduiono plus 2 and stm32f4discovery boards
11 years ago
9db719bb57
stmhal - More systick cleanup. Fix HAL_Delay
11 years ago
f14b92b9e1
REPl working on UART6 with STMHAL
11 years ago
c3d35c6ac7
stm: Put pyb module in ROM.
11 years ago
Damien George
Dave Hylands