mp_module_obj_t can now be put in ROM.
Configuration of float type is now similar to longint: can now choose
none, float or double as the implementation.
math module has basic math functions. For STM port, these are not yet
implemented (they are just stub functions).
This commit also introduces board directories and moves board
specific config into the appropriate board directory.
boards/stm32f4xx-af.csv was extracted from the STM32F4xx datasheet
and hand-tweaked.
make-pins.py takes boards/stm32f4xx-af.csv, boards/stm32f4xx-prefix.c,
and boards/BOARD-NAME/pins.csv as input and generates the file
build/pins_BOARD_NAME.c
The generated pin file for PYBOARD4 looks like this:
https://gist.github.com/dhylands/9063231
The generated pins file includes all of the supported alternate
functions, and includes upsupported alternate functions as comments.
See the commnet block at the top of stm/pin_map.c for details on
how to use the pin mapper.
I also went ahead and modified stm/gpio.c to use the pin mapper.
Raw REPL mode is activated by CTRL-A, and allows you to more easily
communicate with the pyboard over the serial channel. In particular,
automated communication using, eg, pyserial on the PC side.
Ultimately all static strings should be qstr. This entry in the type
structure is only used for printing error messages (to tell the type of
the bad argument), and printing objects that don't supply a .print method.
Using PendSV interrupt at lowest priority, code can now raise an
exception during an interrupt by calling pendsv_nlr_jump. The exception
will be raised when all interrupts are finished. This is used to trap
ctrl-C from the USB VCP to break out of running Python code.
* Add simple ADC driver, with support for ADC1 and all channels.
* Export MicroPython ADC object with read_channel function.
* Add stm32f4xx_adc.c and adc.c to Makefile.
While updating the teensy Makfile, I noticed that the stm Makefile
was using calling arm-none-eabi-objcopy and size rather than
$(OBJCOPY) and $(SIZE), so I added these 2 for consistency.
* Add a TARGET definition to Makefile (default PYBOARD).
* Add support for discovery LEDs in led module.
* Add support for discovery user switch in usersw
* Add EXTI interrupt handler for discovery user switch on (PA0).
* Parameterize led and usrsw modules pins and port.
* Issue #83
Damien George
Dave Hylands
mux
Paul Sokolovsky
John R. Lenton