This commit adds support for saving and loading .mpy files that contain
native code (native, viper and inline-asm). A lot of the ground work was
already done for this in the form of removing pointers from generated
native code. The changes here are mainly to link in qstr values to the
native code, and change the format of .mpy files to contain native code
blocks (possibly mixed with bytecode).
A top-level summary:
- @micropython.native, @micropython.viper and @micropython.asm_thumb/
asm_xtensa are now allowed in .py files when compiling to .mpy, and they
work transparently to the user.
- Entire .py files can be compiled to native via mpy-cross -X emit=native
and for the most part the generated .mpy files should work the same as
their bytecode version.
- The .mpy file format is changed to 1) specify in the header if the file
contains native code and if so the architecture (eg x86, ARMV7M, Xtensa);
2) for each function block the kind of code is specified (bytecode,
native, viper, asm).
- When native code is loaded from a .mpy file the native code must be
modified (in place) to link qstr values in, just like bytecode (see
py/persistentcode.c:arch_link_qstr() function).
In addition, this now defines a public, native ABI for dynamically loadable
native code generated by other languages, like C.
When encoded in the mpy file, if qstr <= QSTR_LAST_STATIC then store two
bytes: 0, static_qstr_id. Otherwise encode the qstr as usual (either with
string data or a reference into the qstr window).
Reduces mpy file size by about 5%.
Instead of emitting two bytes in the bytecode for where the linked qstr
should be written to, it is now replaced by the actual qstr data, or a
reference into the qstr window.
Reduces mpy file size by about 10%.
This is an implementation of a sliding qstr window used to reduce the
number of qstrs stored in a .mpy file. The window size is configured to 32
entries which takes a fixed 64 bytes (16-bits each) on the C stack when
loading/saving a .mpy file. It allows to remember the most recent 32 qstrs
so they don't need to be stored again in the .mpy file. The qstr window
uses a simple least-recently-used mechanism to discard the least recently
used qstr when the window overflows (similar to dictionary compression).
This scheme only needs a single pass to save/load the .mpy file.
Reduces mpy file size by about 25% with a window size of 32.
These macros could in principle be (inline) functions so it makes sense to
have them lower case, to match the other C API functions.
The remaining macros that are upper case are:
- MP_OBJ_TO_PTR, MP_OBJ_FROM_PTR
- MP_OBJ_NEW_SMALL_INT, MP_OBJ_SMALL_INT_VALUE
- MP_OBJ_NEW_QSTR, MP_OBJ_QSTR_VALUE
- MP_OBJ_FUN_MAKE_SIG
- MP_DECLARE_CONST_xxx
- MP_DEFINE_CONST_xxx
These must remain macros because they are used when defining const data (at
least, MP_OBJ_NEW_SMALL_INT is so it makes sense to have
MP_OBJ_SMALL_INT_VALUE also a macro).
For those macros that have been made lower case, compatibility macros are
provided for the old names so that users do not need to change their code
immediately.
If MICROPY_PERSISTENT_CODE_LOAD or MICROPY_ENABLE_COMPILER are enabled then
code gets enabled that calls file reading functions which may be disabled
if no readers have been implemented.
To fix this, introduce a MICROPY_HAS_FILE_READER variable, which is
automatically set if MICROPY_READER_POSIX or MICROPY_READER_VFS is set but
can also be manually set if a custom reader is being implemented. Then
disable the file reading calls if this is not set.
Header files that are considered internal to the py core and should not
normally be included directly are:
py/nlr.h - internal nlr configuration and declarations
py/bc0.h - contains bytecode macro definitions
py/runtime0.h - contains basic runtime enums
Instead, the top-level header files to include are one of:
py/obj.h - includes runtime0.h and defines everything to use the
mp_obj_t type
py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
and defines everything to use the general runtime support functions
Additional, specific headers (eg py/objlist.h) can be included if needed.
This patch allows the following code to run without allocating on the heap:
super().foo(...)
Before this patch such a call would allocate a super object on the heap and
then load the foo method and call it right away. The super object is only
needed to perform the lookup of the method and not needed after that. This
patch makes an optimisation to allocate the super object on the C stack and
discard it right after use.
Changes in code size due to this patch are:
bare-arm: +128
minimal: +232
unix x64: +416
unix nanbox: +364
stmhal: +184
esp8266: +340
cc3200: +128
This patch refactors the error handling in the lexer, to simplify it (ie
reduce code size).
A long time ago, when the lexer/parser/compiler were first written, the
lexer and parser were designed so they didn't use exceptions (ie nlr) to
report errors but rather returned an error code. Over time that has
gradually changed, the parser in particular has more and more ways of
raising exceptions. Also, the lexer never really handled all errors without
raising, eg there were some memory errors which could raise an exception
(and in these rare cases one would get a fatal nlr-not-handled fault).
This patch accepts the fact that the lexer can raise exceptions in some
cases and allows it to raise exceptions to handle all its errors, which are
for the most part just out-of-memory errors during construction of the
lexer. This makes the lexer a bit simpler, and also the persistent code
stuff is simplified.
What this means for users of the lexer is that calls to it must be wrapped
in a nlr handler. But all uses of the lexer already have such an nlr
handler for the parser (and compiler) so that doesn't put any extra burden
on the callers.
Implementations of persistent-code reader are provided for POSIX systems
and systems using FatFS. Macros to use these are MICROPY_READER_POSIX and
MICROPY_READER_FATFS respectively. If an alternative implementation is
needed then a port can define the function mp_reader_new_file.
The config variable MICROPY_MODULE_FROZEN is now made of two separate
parts: MICROPY_MODULE_FROZEN_STR and MICROPY_MODULE_FROZEN_MPY. This
allows to have none, either or both of frozen strings and frozen mpy
files (aka frozen bytecode).
This new compile-time option allows to make the bytecode compiler
configurable at runtime by setting the fields in the mp_dynamic_compiler
structure. By using this feature, the compiler can generate bytecode
that targets any MicroPython runtime/VM, regardless of the host and
target compile-time settings.
Options so far that fall under this dynamic setting are:
- maximum number of bits that a small int can hold;
- whether caching of lookups is used in the bytecode;
- whether to use unicode strings or not (lexer behaviour differs, and
therefore generated string constants differ).
This allows the mp_obj_t type to be configured to something other than a
pointer-sized primitive type.
This patch also includes additional changes to allow the code to compile
when sizeof(mp_uint_t) != sizeof(void*), such as using size_t instead of
mp_uint_t, and various casts.
MICROPY_PERSISTENT_CODE must be enabled, and then enabling
MICROPY_PERSISTENT_CODE_LOAD/SAVE (either or both) will allow loading
and/or saving of code (at the moment just bytecode) from/to a .mpy file.
This patch gets full function argument passing working with native
emitter. Includes named args, keyword args, default args, var args
and var keyword args. Fully Python compliant.
It reuses the bytecode mp_setup_code_state function to do all the hard
work. This function is slightly adjusted to accommodate native calls,
and the native emitter is forced a bit to emit similar prelude and
code-info as bytecode.
This saves a lot of RAM for 2 reasons:
1. For functions that don't have default values, var args or var kw
args (which is a large number of functions in the general case), the
mp_obj_fun_bc_t type now fits in 1 GC block (previously needed 2 because
of the extra pointer to point to the arg_names array). So this saves 16
bytes per function (32 bytes on 64-bit machines).
2. Combining separate memory regions generally saves RAM because the
unused bytes at the end of the GC block are saved for 1 of the blocks
(since that block doesn't exist on its own anymore). So generally this
saves 8 bytes per function.
Tested by importing lots of modules:
- 64-bit Linux gave about an 8% RAM saving for 86k of used RAM.
- pyboard gave about a 6% RAM saving for 31k of used RAM.
Damien George
Sean Burton
Anton Patrushev
Chris Packham
Paul Sokolovsky
Markus Fix