//***************************************************************************** // startup_gcc.c // // Startup code for use with GCC. // // Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ // // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // //***************************************************************************** #include #include "inc/hw_nvic.h" #include "inc/hw_types.h" #include "fault_registers.h" //***************************************************************************** // // The following are constructs created by the linker, indicating where the // the "data" and "bss" segments reside in memory. The initializers for the // for the "data" segment resides immediately following the "text" segment. // //***************************************************************************** extern uint32_t _data; extern uint32_t _edata; extern uint32_t _bss; extern uint32_t _ebss; extern uint32_t _estack; extern uint32_t __init_data; //***************************************************************************** // // Forward declaration of the default fault handlers. // //***************************************************************************** __attribute__ ((section (".boot"))) void ResetISR(void); #ifdef DEBUG static void NmiSR(void) __attribute__( ( naked ) ); static void FaultISR( void ) __attribute__( ( naked ) ); void HardFault_HandlerC(uint32_t *pulFaultStackAddress); static void BusFaultHandler(void) __attribute__( ( naked ) ); #endif static void IntDefaultHandler(void) __attribute__( ( naked ) ); //***************************************************************************** // // External declaration for the freeRTOS handlers // //***************************************************************************** #ifdef USE_FREERTOS extern void vPortSVCHandler(void); extern void xPortPendSVHandler(void); extern void xPortSysTickHandler(void); #endif //***************************************************************************** // // The entry point for the application. // //***************************************************************************** extern int main(void); //***************************************************************************** // // The vector table. Note that the proper constructs must be placed on this to // ensure that it ends up at physical address 0x0000.0000. // //***************************************************************************** __attribute__ ((section(".intvecs"))) void (* const g_pfnVectors[256])(void) = { (void (*)(void))((uint32_t)&_estack), // The initial stack pointer ResetISR, // The reset handler #ifdef DEBUG NmiSR, // The NMI handler FaultISR, // The hard fault handler #else IntDefaultHandler, // The NMI handler IntDefaultHandler, // The hard fault handler #endif IntDefaultHandler, // The MPU fault handler #ifdef DEBUG BusFaultHandler, // The bus fault handler #else IntDefaultHandler, // The bus fault handler #endif IntDefaultHandler, // The usage fault handler 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved #ifdef USE_FREERTOS vPortSVCHandler, // SVCall handler #else IntDefaultHandler, // SVCall handler #endif IntDefaultHandler, // Debug monitor handler 0, // Reserved #ifdef USE_FREERTOS xPortPendSVHandler, // The PendSV handler xPortSysTickHandler, // The SysTick handler #else IntDefaultHandler, // The PendSV handler IntDefaultHandler, // The SysTick handler #endif IntDefaultHandler, // GPIO Port A IntDefaultHandler, // GPIO Port B IntDefaultHandler, // GPIO Port C IntDefaultHandler, // GPIO Port D 0, // Reserved IntDefaultHandler, // UART0 Rx and Tx IntDefaultHandler, // UART1 Rx and Tx 0, // Reserved IntDefaultHandler, // I2C0 Master and Slave 0,0,0,0,0, // Reserved IntDefaultHandler, // ADC Channel 0 IntDefaultHandler, // ADC Channel 1 IntDefaultHandler, // ADC Channel 2 IntDefaultHandler, // ADC Channel 3 IntDefaultHandler, // Watchdog Timer IntDefaultHandler, // Timer 0 subtimer A IntDefaultHandler, // Timer 0 subtimer B IntDefaultHandler, // Timer 1 subtimer A IntDefaultHandler, // Timer 1 subtimer B IntDefaultHandler, // Timer 2 subtimer A IntDefaultHandler, // Timer 2 subtimer B 0,0,0,0, // Reserved IntDefaultHandler, // Flash 0,0,0,0,0, // Reserved IntDefaultHandler, // Timer 3 subtimer A IntDefaultHandler, // Timer 3 subtimer B 0,0,0,0,0,0,0,0,0, // Reserved IntDefaultHandler, // uDMA Software Transfer IntDefaultHandler, // uDMA Error 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved IntDefaultHandler, // SHA 0,0, // Reserved IntDefaultHandler, // AES 0, // Reserved IntDefaultHandler, // DES 0,0,0,0,0, // Reserved IntDefaultHandler, // SDHost 0, // Reserved IntDefaultHandler, // I2S 0, // Reserved IntDefaultHandler, // Camera 0,0,0,0,0,0,0, // Reserved IntDefaultHandler, // NWP to APPS Interrupt IntDefaultHandler, // Power, Reset and Clock module 0,0, // Reserved IntDefaultHandler, // Shared SPI IntDefaultHandler, // Generic SPI IntDefaultHandler, // Link SPI 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0,0,0,0,0,0,0,0,0, // Reserved 0,0 // Reserved }; //***************************************************************************** // // This is the code that gets called when the processor first starts execution // following a reset event. Only the absolutely necessary set is performed, // after which the application supplied entry() routine is called. Any fancy // actions (such as making decisions based on the reset cause register, and // resetting the bits in that register) are left solely in the hands of the // application. // //***************************************************************************** void ResetISR(void) { #if defined(DEBUG) && !defined(BOOTLOADER) // // Fill the main stack with a known value so that // we can measure the main stack high water mark // __asm volatile ( "ldr r0, =_stack \n" "ldr r1, =_estack \n" "mov r2, #0x55555555 \n" ".thumb_func \n" "fill_loop: \n" "cmp r0, r1 \n" "it lt \n" "strlt r2, [r0], #4 \n" "blt fill_loop \n" ); #endif // Get the initial stack pointer location from the vector table // and write this value to the msp register __asm volatile ( "ldr r0, =_text \n" "ldr r0, [r0] \n" "msr msp, r0 \n" ); { uint32_t *pui32Src, *pui32Dest; // // Copy the data segment initializers // pui32Src = &__init_data; for(pui32Dest = &_data; pui32Dest < &_edata; ) { *pui32Dest++ = *pui32Src++; } // // Zero fill the bss segment. // __asm volatile ( "ldr r0, =_bss \n" "ldr r1, =_ebss \n" "mov r2, #0 \n" ".thumb_func \n" "zero_loop: \n" "cmp r0, r1 \n" "it lt \n" "strlt r2, [r0], #4 \n" "blt zero_loop \n" ); } // // Call the application's entry point. // main(); } #ifdef DEBUG //***************************************************************************** // // This is the code that gets called when the processor receives a NMI. This // simply enters an infinite loop, preserving the system state for examination // by a debugger. // //***************************************************************************** static void NmiSR(void) { // Break into the debugger __asm volatile ("bkpt #0 \n"); // // Enter an infinite loop. // for ( ; ; ) { } } //***************************************************************************** // // This is the code that gets called when the processor receives a hard fault // interrupt. This simply enters an infinite loop, preserving the system state // for examination by a debugger. // //***************************************************************************** static void FaultISR(void) { /* * Get the appropriate stack pointer, depending on our mode, * and use it as the parameter to the C handler. This function * will never return */ __asm volatile ( "movs r0, #4 \n" "mov r1, lr \n" "tst r0, r1 \n" "beq _msp \n" "mrs r0, psp \n" "b HardFault_HandlerC \n" "_msp: \n" "mrs r0, msp \n" "b HardFault_HandlerC \n" ) ; } //*********************************************************************************** // HardFaultHandler_C: // This is called from the FaultISR with a pointer the Fault stack // as the parameter. We can then read the values from the stack and place them // into local variables for ease of reading. // We then read the various Fault Status and Address Registers to help decode // cause of the fault. // The function ends with a BKPT instruction to force control back into the debugger //*********************************************************************************** void HardFault_HandlerC(uint32_t *pulFaultStackAddress) { volatile uint32_t r0 ; volatile uint32_t r1 ; volatile uint32_t r2 ; volatile uint32_t r3 ; volatile uint32_t r12 ; volatile uint32_t lr ; volatile uint32_t pc ; volatile uint32_t psr ; volatile _CFSR_t _CFSR ; volatile _HFSR_t _HFSR ; volatile uint32_t _BFAR ; r0 = pulFaultStackAddress[0]; r1 = pulFaultStackAddress[1]; r2 = pulFaultStackAddress[2]; r3 = pulFaultStackAddress[3]; r12 = pulFaultStackAddress[4]; lr = pulFaultStackAddress[5]; pc = pulFaultStackAddress[6]; psr = pulFaultStackAddress[7]; // Configurable Fault Status Register // Consists of MMSR, BFSR and UFSR _CFSR = (*((volatile _CFSR_t *)(0xE000ED28))); // Hard Fault Status Register _HFSR = (*((volatile _HFSR_t *)(0xE000ED2C))); // Bus Fault Address Register _BFAR = (*((volatile uint32_t *)(0xE000ED38))); // Break into the debugger __asm volatile ("bkpt #0 \n"); for ( ; ; ) { // Keep the compiler happy (void)r0, (void)r1, (void)r2, (void)r3, (void)r12, (void)lr, (void)pc, (void)psr; (void)_CFSR, (void)_HFSR, (void)_BFAR; } } //***************************************************************************** // // This is the code that gets called when the processor receives an unexpected // interrupt. This simply enters an infinite loop, preserving the system state // for examination by a debugger. // //***************************************************************************** static void BusFaultHandler(void) { // Break into the debugger __asm volatile ("bkpt #0 \n"); // // Enter an infinite loop. // for ( ; ; ) { } } #endif //***************************************************************************** // // This is the code that gets called when the processor receives an unexpected // interrupt. This simply enters an infinite loop, preserving the system state // for examination by a debugger. // //***************************************************************************** static void IntDefaultHandler(void) { #ifdef DEBUG // Break into the debugger __asm volatile ("bkpt #0 \n"); #endif // // Enter an infinite loop. // for ( ; ; ) { } }