You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
370 lines
11 KiB
370 lines
11 KiB
/**
|
|
******************************************************************************
|
|
* @file STM324x7i_eval.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.0
|
|
* @date 11-January-2013
|
|
* @brief This file contains definitions for STM324x7I_EVAL's Leds, push-buttons
|
|
* and COM ports hardware resources.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM324x7I_EVAL_H
|
|
#define __STM324x7I_EVAL_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx.h"
|
|
|
|
/** @addtogroup Utilities
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM32_EVAL
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM324x7I_EVAL
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM324x7I_EVAL_LOW_LEVEL
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup STM324x7I_EVAL_LOW_LEVEL_Exported_Types
|
|
* @{
|
|
*/
|
|
#if 0
|
|
typedef enum
|
|
{
|
|
LED1 = 0,
|
|
LED2 = 1,
|
|
LED3 = 2,
|
|
LED4 = 3
|
|
} Led_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
BUTTON_WAKEUP = 0,
|
|
BUTTON_TAMPER = 1,
|
|
BUTTON_KEY = 2,
|
|
BUTTON_RIGHT = 3,
|
|
BUTTON_LEFT = 4,
|
|
BUTTON_UP = 5,
|
|
BUTTON_DOWN = 6,
|
|
BUTTON_SEL = 7
|
|
} Button_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
BUTTON_MODE_GPIO = 0,
|
|
BUTTON_MODE_EXTI = 1
|
|
} ButtonMode_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
JOY_NONE = 0,
|
|
JOY_SEL = 1,
|
|
JOY_DOWN = 2,
|
|
JOY_LEFT = 3,
|
|
JOY_RIGHT = 4,
|
|
JOY_UP = 5
|
|
} JOYState_TypeDef
|
|
;
|
|
|
|
typedef enum
|
|
{
|
|
COM1 = 0,
|
|
COM2 = 1
|
|
} COM_TypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM324x7I_EVAL_LOW_LEVEL_Exported_Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Define for STM324x7I_EVAL board
|
|
*/
|
|
#if !defined (USE_STM324x7I_EVAL)
|
|
#define USE_STM324x7I_EVAL
|
|
#endif
|
|
|
|
/** @addtogroup STM324x7I_EVAL_LOW_LEVEL_LED
|
|
* @{
|
|
*/
|
|
#define LEDn 4
|
|
|
|
#define LED1_PIN GPIO_Pin_6
|
|
#define LED1_GPIO_PORT GPIOG
|
|
#define LED1_GPIO_CLK RCC_AHB1Periph_GPIOG
|
|
|
|
#define LED2_PIN GPIO_Pin_8
|
|
#define LED2_GPIO_PORT GPIOG
|
|
#define LED2_GPIO_CLK RCC_AHB1Periph_GPIOG
|
|
|
|
#define LED3_PIN GPIO_Pin_9
|
|
#define LED3_GPIO_PORT GPIOI
|
|
#define LED3_GPIO_CLK RCC_AHB1Periph_GPIOI
|
|
|
|
#define LED4_PIN GPIO_Pin_7
|
|
#define LED4_GPIO_PORT GPIOC
|
|
#define LED4_GPIO_CLK RCC_AHB1Periph_GPIOC
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM324x7I_EVAL_LOW_LEVEL_BUTTON
|
|
* @{
|
|
*/
|
|
#define BUTTONn 3 /*!< Joystick pins are connected to
|
|
an IO Expander (accessible through
|
|
I2C1 interface) */
|
|
|
|
/**
|
|
* @brief Wakeup push-button
|
|
*/
|
|
#define WAKEUP_BUTTON_PIN GPIO_Pin_0
|
|
#define WAKEUP_BUTTON_GPIO_PORT GPIOA
|
|
#define WAKEUP_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOA
|
|
#define WAKEUP_BUTTON_EXTI_LINE EXTI_Line0
|
|
#define WAKEUP_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOA
|
|
#define WAKEUP_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource0
|
|
#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
|
|
|
|
/**
|
|
* @brief Tamper push-button
|
|
*/
|
|
#define TAMPER_BUTTON_PIN GPIO_Pin_13
|
|
#define TAMPER_BUTTON_GPIO_PORT GPIOC
|
|
#define TAMPER_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOC
|
|
#define TAMPER_BUTTON_EXTI_LINE EXTI_Line13
|
|
#define TAMPER_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOC
|
|
#define TAMPER_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource13
|
|
#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
|
|
|
|
/**
|
|
* @brief Key push-button
|
|
*/
|
|
#define KEY_BUTTON_PIN GPIO_Pin_15
|
|
#define KEY_BUTTON_GPIO_PORT GPIOG
|
|
#define KEY_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOG
|
|
#define KEY_BUTTON_EXTI_LINE EXTI_Line15
|
|
#define KEY_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOG
|
|
#define KEY_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource15
|
|
#define KEY_BUTTON_EXTI_IRQn EXTI15_10_IRQn
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM324x7I_EVAL_LOW_LEVEL_COM
|
|
* @{
|
|
*/
|
|
#define COMn 1
|
|
|
|
/**
|
|
* @brief Definition for COM port1, connected to USART3
|
|
*/
|
|
#define EVAL_COM1 USART3
|
|
#define EVAL_COM1_CLK RCC_APB1Periph_USART3
|
|
#define EVAL_COM1_TX_PIN GPIO_Pin_10
|
|
#define EVAL_COM1_TX_GPIO_PORT GPIOC
|
|
#define EVAL_COM1_TX_GPIO_CLK RCC_AHB1Periph_GPIOC
|
|
#define EVAL_COM1_TX_SOURCE GPIO_PinSource10
|
|
#define EVAL_COM1_TX_AF GPIO_AF_USART3
|
|
#define EVAL_COM1_RX_PIN GPIO_Pin_11
|
|
#define EVAL_COM1_RX_GPIO_PORT GPIOC
|
|
#define EVAL_COM1_RX_GPIO_CLK RCC_AHB1Periph_GPIOC
|
|
#define EVAL_COM1_RX_SOURCE GPIO_PinSource11
|
|
#define EVAL_COM1_RX_AF GPIO_AF_USART3
|
|
#define EVAL_COM1_IRQn USART3_IRQn
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM324x7I_EVAL_LOW_LEVEL_SD_FLASH
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief SD FLASH SDIO Interface
|
|
*/
|
|
#define SD_DETECT_PIN GPIO_Pin_13 /* PC.13 */
|
|
#define SD_DETECT_GPIO_PORT GPIOC /* GPIOC */
|
|
#define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOC
|
|
|
|
#define SDIO_FIFO_ADDRESS ((uint32_t)0x40012C80)
|
|
/**
|
|
* @brief SDIO Intialization Frequency (400KHz max)
|
|
*/
|
|
#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
|
|
/**
|
|
* @brief SDIO Data Transfer Frequency (25MHz max)
|
|
*/
|
|
#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
|
|
|
|
#define SD_SDIO_DMA DMA2
|
|
#define SD_SDIO_DMA_CLK RCC_AHB1Periph_DMA2
|
|
|
|
#define SD_SDIO_DMA_STREAM3 3
|
|
//#define SD_SDIO_DMA_STREAM6 6
|
|
|
|
#ifdef SD_SDIO_DMA_STREAM3
|
|
#define SD_SDIO_DMA_STREAM DMA2_Stream3
|
|
#define SD_SDIO_DMA_CHANNEL DMA_Channel_4
|
|
#define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF3
|
|
#define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF3
|
|
#define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF3
|
|
#define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF3
|
|
#define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF3
|
|
#define SD_SDIO_DMA_IRQn DMA2_Stream3_IRQn
|
|
#define SD_SDIO_DMA_IRQHANDLER DMA2_Stream3_IRQHandler
|
|
#elif defined SD_SDIO_DMA_STREAM6
|
|
#define SD_SDIO_DMA_STREAM DMA2_Stream6
|
|
#define SD_SDIO_DMA_CHANNEL DMA_Channel_4
|
|
#define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF6
|
|
#define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6
|
|
#define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF6
|
|
#define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF6
|
|
#define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF6
|
|
#define SD_SDIO_DMA_IRQn DMA2_Stream6_IRQn
|
|
#define SD_SDIO_DMA_IRQHANDLER DMA2_Stream6_IRQHandler
|
|
#endif /* SD_SDIO_DMA_STREAM3 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM324x7I_EVAL_LOW_LEVEL_I2C_EE
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief I2C EEPROM Interface pins
|
|
*/
|
|
#if 0
|
|
#define sEE_I2C I2C1
|
|
#define sEE_I2C_CLK RCC_APB1Periph_I2C1
|
|
#define sEE_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */
|
|
#define sEE_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */
|
|
#define sEE_I2C_SCL_GPIO_CLK RCC_AHB1Periph_GPIOB
|
|
#define sEE_I2C_SCL_SOURCE GPIO_PinSource6
|
|
#define sEE_I2C_SCL_AF GPIO_AF_I2C1
|
|
#define sEE_I2C_SDA_PIN GPIO_Pin_9 /* PB.09 */
|
|
#define sEE_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */
|
|
#define sEE_I2C_SDA_GPIO_CLK RCC_AHB1Periph_GPIOB
|
|
#define sEE_I2C_SDA_SOURCE GPIO_PinSource9
|
|
#define sEE_I2C_SDA_AF GPIO_AF_I2C1
|
|
#define sEE_M24C64_32
|
|
|
|
#define sEE_I2C_DMA DMA1
|
|
#define sEE_I2C_DMA_CHANNEL DMA_Channel_1
|
|
#define sEE_I2C_DMA_STREAM_TX DMA1_Stream6
|
|
#define sEE_I2C_DMA_STREAM_RX DMA1_Stream0
|
|
#define sEE_I2C_DMA_CLK RCC_AHB1Periph_DMA1
|
|
#define sEE_I2C_DR_Address ((uint32_t)0x40005410)
|
|
#define sEE_USE_DMA
|
|
|
|
#define sEE_I2C_DMA_TX_IRQn DMA1_Stream6_IRQn
|
|
#define sEE_I2C_DMA_RX_IRQn DMA1_Stream0_IRQn
|
|
#define sEE_I2C_DMA_TX_IRQHandler DMA1_Stream6_IRQHandler
|
|
#define sEE_I2C_DMA_RX_IRQHandler DMA1_Stream0_IRQHandler
|
|
#define sEE_I2C_DMA_PREPRIO 0
|
|
#define sEE_I2C_DMA_SUBPRIO 0
|
|
|
|
#define sEE_TX_DMA_FLAG_FEIF DMA_FLAG_FEIF6
|
|
#define sEE_TX_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6
|
|
#define sEE_TX_DMA_FLAG_TEIF DMA_FLAG_TEIF6
|
|
#define sEE_TX_DMA_FLAG_HTIF DMA_FLAG_HTIF6
|
|
#define sEE_TX_DMA_FLAG_TCIF DMA_FLAG_TCIF6
|
|
#define sEE_RX_DMA_FLAG_FEIF DMA_FLAG_FEIF0
|
|
#define sEE_RX_DMA_FLAG_DMEIF DMA_FLAG_DMEIF0
|
|
#define sEE_RX_DMA_FLAG_TEIF DMA_FLAG_TEIF0
|
|
#define sEE_RX_DMA_FLAG_HTIF DMA_FLAG_HTIF0
|
|
#define sEE_RX_DMA_FLAG_TCIF DMA_FLAG_TCIF0
|
|
|
|
#define sEE_DIRECTION_TX 0
|
|
#define sEE_DIRECTION_RX 1
|
|
|
|
/* Time constant for the delay caclulation allowing to have a millisecond
|
|
incrementing counter. This value should be equal to (System Clock / 1000).
|
|
ie. if system clock = 168MHz then sEE_TIME_CONST should be 168. */
|
|
#define sEE_TIME_CONST 168
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM324x7I_EVAL_LOW_LEVEL_Exported_Macros
|
|
* @{
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM324x7I_EVAL_LOW_LEVEL_Exported_Functions
|
|
* @{
|
|
*/
|
|
void SD_LowLevel_DeInit(void);
|
|
void SD_LowLevel_Init(void);
|
|
void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize);
|
|
void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize);
|
|
#if 0
|
|
void sEE_LowLevel_DeInit(void);
|
|
void sEE_LowLevel_Init(void);
|
|
void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction);
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM324x7I_EVAL_H */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|