You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
92 lines
3.1 KiB
92 lines
3.1 KiB
The accelerometer
|
|
=================
|
|
|
|
Here you will learn how to read the accelerometer and signal using LEDs states like tilt left and tilt right.
|
|
|
|
Using the accelerometer
|
|
-----------------------
|
|
|
|
The pyboard has an accelerometer (a tiny mass on a tiny spring) that can be used
|
|
to detect the angle of the board and motion. There is a different sensor for
|
|
each of the x, y, z directions. To get the value of the accelerometer, create a
|
|
pyb.Accel() object and then call the x() method. ::
|
|
|
|
>>> accel = pyb.Accel()
|
|
>>> accel.x()
|
|
7
|
|
|
|
This returns a signed integer with a value between around -30 and 30. Note that
|
|
the measurement is very noisy, this means that even if you keep the board
|
|
perfectly still there will be some variation in the number that you measure.
|
|
Because of this, you shouldn't use the exact value of the x() method but see if
|
|
it is in a certain range.
|
|
|
|
We will start by using the accelerometer to turn on a light if it is not flat. ::
|
|
|
|
accel = pyb.Accel()
|
|
light = pyb.LED(3)
|
|
SENSITIVITY = 3
|
|
|
|
while True:
|
|
x = accel.x()
|
|
if abs(x) > SENSITIVITY:
|
|
light.on()
|
|
else:
|
|
light.off()
|
|
|
|
pyb.delay(100)
|
|
|
|
We create Accel and LED objects, then get the value of the x direction of the
|
|
accelerometer. If the magnitude of x is bigger than a certain value ``SENSITIVITY``,
|
|
then the LED turns on, otherwise it turns off. The loop has a small ``pyb.delay()``
|
|
otherwise the LED flashes annoyingly when the value of x is close to
|
|
``SENSITIVITY``. Try running this on the pyboard and tilt the board left and right
|
|
to make the LED turn on and off.
|
|
|
|
**Exercise: Change the above script so that the blue LED gets brighter the more
|
|
you tilt the pyboard. HINT: You will need to rescale the values, intensity goes
|
|
from 0-255.**
|
|
|
|
Making a spirit level
|
|
---------------------
|
|
|
|
The example above is only sensitive to the angle in the x direction but if we
|
|
use the ``y()`` value and more LEDs we can turn the pyboard into a spirit level. ::
|
|
|
|
xlights = (pyb.LED(2), pyb.LED(3))
|
|
ylights = (pyb.LED(1), pyb.LED(4))
|
|
|
|
accel = pyb.Accel()
|
|
SENSITIVITY = 3
|
|
|
|
while True:
|
|
x = accel.x()
|
|
if x > SENSITIVITY:
|
|
xlights[0].on()
|
|
xlights[1].off()
|
|
elif x < -SENSITIVITY:
|
|
xlights[1].on()
|
|
xlights[0].off()
|
|
else:
|
|
xlights[0].off()
|
|
xlights[1].off()
|
|
|
|
y = accel.y()
|
|
if y > SENSITIVITY:
|
|
ylights[0].on()
|
|
ylights[1].off()
|
|
elif y < -SENSITIVITY:
|
|
ylights[1].on()
|
|
ylights[0].off()
|
|
else:
|
|
ylights[0].off()
|
|
ylights[1].off()
|
|
|
|
pyb.delay(100)
|
|
|
|
We start by creating a tuple of LED objects for the x and y directions. Tuples
|
|
are immutable objects in python which means they can't be modified once they are
|
|
created. We then proceed as before but turn on a different LED for positive and
|
|
negative x values. We then do the same for the y direction. This isn't
|
|
particularly sophisticated but it does the job. Run this on your pyboard and you
|
|
should see different LEDs turning on depending on how you tilt the board.
|
|
|