You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
117 lines
3.9 KiB
117 lines
3.9 KiB
.. _machine.I2C:
|
|
|
|
class I2C -- a two-wire serial protocol
|
|
=======================================
|
|
|
|
I2C is a two-wire protocol for communicating between devices. At the physical
|
|
level it consists of 2 wires: SCL and SDA, the clock and data lines respectively.
|
|
|
|
I2C objects are created attached to a specific bus. They can be initialised
|
|
when created, or initialised later on.
|
|
|
|
.. only:: port_wipy
|
|
|
|
Example::
|
|
|
|
from machine import I2C
|
|
|
|
i2c = I2C(0) # create on bus 0
|
|
i2c = I2C(0, I2C.MASTER) # create and init as a master
|
|
i2c.init(I2C.MASTER, baudrate=20000) # init as a master
|
|
i2c.deinit() # turn off the peripheral
|
|
|
|
Printing the i2c object gives you information about its configuration.
|
|
|
|
.. only:: port_wipy
|
|
|
|
A master must specify the recipient's address::
|
|
|
|
i2c.init(I2C.MASTER)
|
|
i2c.writeto(0x42, '123') # send 3 bytes to slave with address 0x42
|
|
i2c.writeto(addr=0x42, b'456') # keyword for address
|
|
|
|
Master also has other methods::
|
|
|
|
i2c.scan() # scan for slaves on the bus, returning
|
|
# a list of valid addresses
|
|
i2c.readfrom_mem(0x42, 2, 3) # read 3 bytes from memory of slave 0x42,
|
|
# starting at address 2 in the slave
|
|
i2c.writeto_mem(0x42, 2, 'abc') # write 'abc' (3 bytes) to memory of slave 0x42
|
|
# starting at address 2 in the slave, timeout after 1 second
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. only:: port_wipy
|
|
|
|
.. class:: machine.I2C(bus, ...)
|
|
|
|
Construct an I2C object on the given bus. `bus` can only be 0.
|
|
If the bus is not given, the default one will be selected (0).
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: i2c.deinit()
|
|
|
|
Turn off the I2C bus.
|
|
|
|
.. only:: port_wipy
|
|
|
|
.. method:: i2c.init(mode, \*, baudrate=100000, pins=(SDA, SCL))
|
|
|
|
Initialise the I2C bus with the given parameters:
|
|
|
|
- ``mode`` must be ``I2C.MASTER``
|
|
- ``baudrate`` is the SCL clock rate
|
|
- ``pins`` is an optional tuple with the pins to assign to the I2C bus.
|
|
|
|
.. method:: i2c.readfrom(addr, nbytes)
|
|
|
|
Read ``nbytes`` from the slave specified by ``addr``.
|
|
Returns a ``bytes`` object with the data read.
|
|
|
|
.. method:: i2c.readfrom_into(addr, buf)
|
|
|
|
Read into ``buf`` from the slave specified by ``addr``.
|
|
Returns the number of bytes read.
|
|
|
|
.. method:: i2c.writeto(addr, buf, \*, stop=True)
|
|
|
|
Write ``buf`` to the slave specified by ``addr``. Set ``stop`` to ``False``
|
|
if the transfer should be continued.
|
|
Returns the number of bytes written.
|
|
|
|
.. method:: i2c.readfrom_mem(addr, memaddr, nbytes, \*, addrsize=8)
|
|
|
|
Read ``nbytes`` from the slave specified by ``addr`` starting from the memory
|
|
address specified by ``memaddr``.
|
|
Param ``addrsize`` specifies the address size in bits.
|
|
Returns a ``bytes`` object with the data read.
|
|
|
|
.. method:: i2c.readfrom_mem_into(addr, memaddr, buf, \*, addrsize=8)
|
|
|
|
Read into ``buf`` from the slave specified by ``addr`` starting from the memory
|
|
address specified by ``memaddr``.
|
|
Param ``addrsize`` specifies the address size in bits.
|
|
Returns the number of bytes read.
|
|
|
|
.. method:: i2c.writeto_mem(addr, memaddr, buf, \*, addrsize=8)
|
|
|
|
Write ``buf`` to the slave specified by ``addr`` starting from the
|
|
memory address specified by ``memaddr``. Param ``addrsize`` specifies the
|
|
address size in bits.
|
|
Set ``stop`` to ``False`` if the transfer should be continued.
|
|
Returns the number of bytes written.
|
|
|
|
.. method:: i2c.scan()
|
|
|
|
Scan all I2C addresses from 0x01 to 0x7f and return a list of those that respond.
|
|
Only valid when in master mode.
|
|
|
|
Constants
|
|
---------
|
|
|
|
.. data:: I2C.MASTER
|
|
|
|
for initialising the bus to master mode
|
|
|