You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
46 lines
1.3 KiB
46 lines
1.3 KiB
.. _pins_zephyr:
|
|
|
|
GPIO Pins
|
|
=========
|
|
|
|
Use :ref:`machine.Pin <machine.Pin>` to control I/O pins.
|
|
|
|
For Zephyr, pins are initialized using a tuple of port and pin number ``(\"GPIO_x\", pin#)``
|
|
for the ``id`` value. For example to initialize a pin for the red LED on a FRDM-k64 board::
|
|
|
|
LED = Pin(("GPIO_1", 22), Pin.OUT)
|
|
|
|
Reference your board's datasheet or Zephyr documentation for pin numbers, see below for more examples.
|
|
|
|
.. list-table:: Pin Formatting
|
|
:header-rows: 1
|
|
|
|
* - Board
|
|
- Pin
|
|
- Format
|
|
* - frdm_k64f
|
|
- Red LED = PTB22
|
|
- ("GPIO_1", 22)
|
|
* - 96b_carbon
|
|
- LED1 = PD2
|
|
- ("GPIOD", 2)
|
|
* - mimxrt685_evk_cm33
|
|
- Green LED = PIO0_14
|
|
- ("GPIO0", 14)
|
|
|
|
Interrupts
|
|
----------
|
|
|
|
The Zephyr port also supports interrupt handling for Pins using `machine.Pin.irq() <machine.Pin.irq>`.
|
|
To respond to Pin change IRQs run::
|
|
|
|
from machine import Pin
|
|
|
|
SW2 = Pin(("GPIO_2", 6), Pin.IN) # create Pin object for switch 2
|
|
SW3 = Pin(("GPIO_0", 4), Pin.IN) # create Pin object for switch 3
|
|
|
|
SW2.irq(lambda t: print("SW2 changed")) # print message when SW2 state is changed (triggers change IRQ)
|
|
SW3.irq(lambda t: print("SW3 changed")) # print message when SW3 state is changed (triggers change IRQ)
|
|
|
|
while True: # wait
|
|
pass
|
|
|