You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
235 lines
7.8 KiB
235 lines
7.8 KiB
.. currentmodule:: rp2
|
|
|
|
:mod:`rp2` --- functionality specific to the RP2040
|
|
===================================================
|
|
|
|
.. module:: rp2
|
|
:synopsis: functionality specific to the RP2
|
|
|
|
The ``rp2`` module contains functions and classes specific to the RP2040, as
|
|
used in the Raspberry Pi Pico.
|
|
|
|
See the `RP2040 Python datasheet
|
|
<https://datasheets.raspberrypi.org/pico/raspberry-pi-pico-python-sdk.pdf>`_
|
|
for more information, and `pico-micropython-examples
|
|
<https://github.com/raspberrypi/pico-micropython-examples/tree/master/pio>`_
|
|
for example code.
|
|
|
|
|
|
PIO related functions
|
|
---------------------
|
|
|
|
The ``rp2`` module includes functions for assembling PIO programs.
|
|
|
|
For running PIO programs, see :class:`rp2.StateMachine`.
|
|
|
|
.. function:: asm_pio(*, out_init=None, set_init=None, sideset_init=None, in_shiftdir=0, out_shiftdir=0, autopush=False, autopull=False, push_thresh=32, pull_thresh=32, fifo_join=PIO.JOIN_NONE)
|
|
|
|
Assemble a PIO program.
|
|
|
|
The following parameters control the initial state of the GPIO pins, as one
|
|
of `PIO.IN_LOW`, `PIO.IN_HIGH`, `PIO.OUT_LOW` or `PIO.OUT_HIGH`. If the
|
|
program uses more than one pin, provide a tuple, e.g.
|
|
``out_init=(PIO.OUT_LOW, PIO.OUT_LOW)``.
|
|
|
|
- *out_init* configures the pins used for ``out()`` instructions.
|
|
- *set_init* configures the pins used for ``set()`` instructions. There can
|
|
be at most 5.
|
|
- *sideset_init* configures the pins used side-setting. There can be at
|
|
most 5.
|
|
|
|
The following parameters are used by default, but can be overridden in
|
|
`StateMachine.init()`:
|
|
|
|
- *in_shiftdir* is the default direction the ISR will shift, either
|
|
`PIO.SHIFT_LEFT` or `PIO.SHIFT_RIGHT`.
|
|
- *out_shiftdir* is the default direction the OSR will shift, either
|
|
`PIO.SHIFT_LEFT` or `PIO.SHIFT_RIGHT`.
|
|
- *push_thresh* is the threshold in bits before auto-push or conditional
|
|
re-pushing is triggered.
|
|
- *pull_thresh* is the threshold in bits before auto-push or conditional
|
|
re-pushing is triggered.
|
|
|
|
The remaining parameters are:
|
|
|
|
- *autopush* configures whether auto-push is enabled.
|
|
- *autopull* configures whether auto-pull is enabled.
|
|
- *fifo_join* configures whether the 4-word TX and RX FIFOs should be
|
|
combined into a single 8-word FIFO for one direction only. The options
|
|
are `PIO.JOIN_NONE`, `PIO.JOIN_RX` and `PIO.JOIN_TX`.
|
|
|
|
.. function:: asm_pio_encode(instr, sideset_count, sideset_opt=False)
|
|
|
|
Assemble a single PIO instruction. You usually want to use `asm_pio()`
|
|
instead.
|
|
|
|
>>> rp2.asm_pio_encode("set(0, 1)", 0)
|
|
57345
|
|
|
|
.. class:: PIOASMError
|
|
|
|
This exception is raised from `asm_pio()` or `asm_pio_encode()` if there is
|
|
an error assembling a PIO program.
|
|
|
|
|
|
PIO assembly language instructions
|
|
----------------------------------
|
|
|
|
PIO state machines are programmed in a custom assembly language with nine core
|
|
PIO-machine instructions. In MicroPython, PIO assembly routines are written as
|
|
a Python function with the decorator ``@rp2.asm_pio()``, and they use Python
|
|
syntax. Such routines support standard Python variables and arithmetic, as well
|
|
as the following custom functions that encode PIO instructions and direct the
|
|
assembler. See sec 3.4 of the RP2040 datasheet for further details.
|
|
|
|
wrap_target()
|
|
Specify the location where execution continues after program wrapping.
|
|
By default this is the start of the PIO routine.
|
|
|
|
wrap()
|
|
Specify the location where the program finishes and wraps around.
|
|
If this directive is not used then it is added automatically at the end of
|
|
the PIO routine. Wrapping does not cost any execution cycles.
|
|
|
|
label(label)
|
|
Define a label called *label* at the current location. *label* can be a
|
|
string or integer.
|
|
|
|
word(instr, label=None)
|
|
Insert an arbitrary 16-bit word in the assembled output.
|
|
|
|
- *instr*: the 16-bit value
|
|
- *label*: if given, look up the label and logical-or the label's value with
|
|
*instr*
|
|
|
|
jmp(...)
|
|
This instruction takes two forms:
|
|
|
|
jmp(label)
|
|
- *label*: label to jump to unconditionally
|
|
|
|
jmp(cond, label)
|
|
- *cond*: the condition to check, one of:
|
|
|
|
- ``not_x``, ``not_y``: true if register is zero
|
|
- ``x_dec``, ``y_dec``: true if register is non-zero, and do post
|
|
decrement
|
|
- ``x_not_y``: true if X is not equal to Y
|
|
- ``pin``: true if the input pin is set
|
|
- ``not_osre``: true if OSR is not empty (hasn't reached its
|
|
threshold)
|
|
|
|
- *label*: label to jump to if condition is true
|
|
|
|
wait(polarity, src, index)
|
|
Block, waiting for high/low on a pin or IRQ line.
|
|
|
|
- *polarity*: 0 or 1, whether to wait for a low or high value
|
|
- *src*: one of: ``gpio`` (absolute pin), ``pin`` (pin relative to
|
|
StateMachine's ``in_base`` argument), ``irq``
|
|
- *index*: 0-31, the index for *src*
|
|
|
|
in_(src, bit_count)
|
|
Shift data in from *src* to ISR.
|
|
|
|
- *src*: one of: ``pins``, ``x``, ``y``, ``null``, ``isr``, ``osr``
|
|
- *bit_count*: number of bits to shift in (1-32)
|
|
|
|
out(dest, bit_count)
|
|
Shift data out from OSR to *dest*.
|
|
|
|
- *dest*: one of: ``pins``, ``x``, ``y``, ``pindirs``, ``pc``, ``isr``,
|
|
``exec``
|
|
- *bit_count*: number of bits to shift out (1-32)
|
|
|
|
push(...)
|
|
Push ISR to the RX FIFO, then clear ISR to zero.
|
|
This instruction takes the following forms:
|
|
|
|
- push()
|
|
- push(block)
|
|
- push(noblock)
|
|
- push(iffull)
|
|
- push(iffull, block)
|
|
- push(iffull, noblock)
|
|
|
|
If ``block`` is used then the instruction stalls if the RX FIFO is full.
|
|
The default is to block. If ``iffull`` is used then it only pushes if the
|
|
input shift count has reached its threshold.
|
|
|
|
pull(...)
|
|
Pull from the TX FIFO into OSR.
|
|
This instruction takes the following forms:
|
|
|
|
- pull()
|
|
- pull(block)
|
|
- pull(noblock)
|
|
- pull(ifempty)
|
|
- pull(ifempty, block)
|
|
- pull(ifempty, noblock)
|
|
|
|
If ``block`` is used then the instruction stalls if the TX FIFO is empty.
|
|
The default is to block. If ``ifempty`` is used then it only pulls if the
|
|
output shift count has reached its threshold.
|
|
|
|
mov(dest, src)
|
|
Move into *dest* the value from *src*.
|
|
|
|
- *dest*: one of: ``pins``, ``x``, ``y``, ``exec``, ``pc``, ``isr``, ``osr``
|
|
- *src*: one of: ``pins``, ``x``, ``y``, ``null``, ``status``, ``isr``,
|
|
``osr``; this argument can be optionally modified by wrapping it in
|
|
``invert()`` or ``reverse()`` (but not both together)
|
|
|
|
irq(...)
|
|
Set or clear an IRQ flag.
|
|
This instruction takes two forms:
|
|
|
|
irq(index)
|
|
- *index*: 0-7, or ``rel(0)`` to ``rel(7)``
|
|
|
|
irq(mode, index)
|
|
- *mode*: one of: ``block``, ``clear``
|
|
- *index*: 0-7, or ``rel(0)`` to ``rel(7)``
|
|
|
|
If ``block`` is used then the instruction stalls until the flag is cleared
|
|
by another entity. If ``clear`` is used then the flag is cleared instead of
|
|
being set. Relative IRQ indices add the state machine ID to the IRQ index
|
|
with modulo-4 addition. IRQs 0-3 are visible from to the processor, 4-7 are
|
|
internal to the state machines.
|
|
|
|
set(dest, data)
|
|
Set *dest* with the value *data*.
|
|
|
|
- *dest*: ``pins``, ``x``, ``y``, ``pindirs``
|
|
- *data*: value (0-31)
|
|
|
|
nop()
|
|
This is a pseudoinstruction that assembles to ``mov(y, y)`` and has no side
|
|
effect.
|
|
|
|
.side(value)
|
|
This is a modifier which can be applied to any instruction, and is used to
|
|
control side-set pin values.
|
|
|
|
- *value*: the value (bits) to output on the side-set pins
|
|
|
|
.delay(value)
|
|
This is a modifier which can be applied to any instruction, and specifies
|
|
how many cycles to delay for after the instruction executes.
|
|
|
|
- *value*: cycles to delay, 0-31 (maximum value reduced if side-set pins are
|
|
used)
|
|
|
|
[value]
|
|
This is a modifier and is equivalent to ``.delay(value)``.
|
|
|
|
|
|
Classes
|
|
-------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
rp2.Flash.rst
|
|
rp2.PIO.rst
|
|
rp2.StateMachine.rst
|
|
|