You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
122 lines
4.2 KiB
122 lines
4.2 KiB
.. currentmodule:: machine
|
|
.. _machine.PWM:
|
|
|
|
class PWM -- pulse width modulation
|
|
===================================
|
|
|
|
This class provides pulse width modulation output.
|
|
|
|
Example usage::
|
|
|
|
from machine import PWM
|
|
|
|
pwm = PWM(pin) # create a PWM object on a pin
|
|
pwm.duty_u16(32768) # set duty to 50%
|
|
|
|
# reinitialise with a period of 200us, duty of 5us
|
|
pwm.init(freq=5000, duty_ns=5000)
|
|
|
|
pwm.duty_ns(3000) # set pulse width to 3us
|
|
|
|
pwm.deinit()
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: PWM(dest, *, freq, duty_u16, duty_ns)
|
|
|
|
Construct and return a new PWM object using the following parameters:
|
|
|
|
- *dest* is the entity on which the PWM is output, which is usually a
|
|
:ref:`machine.Pin <machine.Pin>` object, but a port may allow other values,
|
|
like integers.
|
|
- *freq* should be an integer which sets the frequency in Hz for the
|
|
PWM cycle.
|
|
- *duty_u16* sets the duty cycle as a ratio ``duty_u16 / 65535``.
|
|
- *duty_ns* sets the pulse width in nanoseconds.
|
|
|
|
Setting *freq* may affect other PWM objects if the objects share the same
|
|
underlying PWM generator (this is hardware specific).
|
|
Only one of *duty_u16* and *duty_ns* should be specified at a time.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: PWM.init(*, freq, duty_u16, duty_ns)
|
|
|
|
Modify settings for the PWM object. See the above constructor for details
|
|
about the parameters.
|
|
|
|
.. method:: PWM.deinit()
|
|
|
|
Disable the PWM output.
|
|
|
|
.. method:: PWM.freq([value])
|
|
|
|
Get or set the current frequency of the PWM output.
|
|
|
|
With no arguments the frequency in Hz is returned.
|
|
|
|
With a single *value* argument the frequency is set to that value in Hz. The
|
|
method may raise a ``ValueError`` if the frequency is outside the valid range.
|
|
|
|
.. method:: PWM.duty_u16([value])
|
|
|
|
Get or set the current duty cycle of the PWM output, as an unsigned 16-bit
|
|
value in the range 0 to 65535 inclusive.
|
|
|
|
With no arguments the duty cycle is returned.
|
|
|
|
With a single *value* argument the duty cycle is set to that value, measured
|
|
as the ratio ``value / 65535``.
|
|
|
|
.. method:: PWM.duty_ns([value])
|
|
|
|
Get or set the current pulse width of the PWM output, as a value in nanoseconds.
|
|
|
|
With no arguments the pulse width in nanoseconds is returned.
|
|
|
|
With a single *value* argument the pulse width is set to that value.
|
|
|
|
Specific PWM class implementations
|
|
----------------------------------
|
|
|
|
The following concrete class(es) implement enhancements to the PWM class.
|
|
|
|
| :ref:`pyb.Timer for PyBoard <pyb.Timer>`
|
|
|
|
Limitations of PWM
|
|
------------------
|
|
|
|
* Not all frequencies can be generated with absolute accuracy due to
|
|
the discrete nature of the computing hardware. Typically the PWM frequency
|
|
is obtained by dividing some integer base frequency by an integer divider.
|
|
For example, if the base frequency is 80MHz and the required PWM frequency is
|
|
300kHz the divider must be a non-integer number 80000000 / 300000 = 266.67.
|
|
After rounding the divider is set to 267 and the PWM frequency will be
|
|
80000000 / 267 = 299625.5 Hz, not 300kHz. If the divider is set to 266 then
|
|
the PWM frequency will be 80000000 / 266 = 300751.9 Hz, but again not 300kHz.
|
|
|
|
Some ports like the RP2040 one use a fractional divider, which allow a finer
|
|
granularity of the frequency at higher frequencies by switching the PWM
|
|
pulse duration between two adjacent values, such that the resulting average
|
|
frequency is more close to the intended one, at the cost of spectral purity.
|
|
|
|
* The duty cycle has the same discrete nature and its absolute accuracy is not
|
|
achievable. On most hardware platforms the duty will be applied at the next
|
|
frequency period. Therefore, you should wait more than "1/frequency" before
|
|
measuring the duty.
|
|
|
|
* The frequency and the duty cycle resolution are usually interdependent.
|
|
The higher the PWM frequency the lower the duty resolution which is available,
|
|
and vice versa. For example, a 300kHz PWM frequency can have a duty cycle
|
|
resolution of 8 bit, not 16-bit as may be expected. In this case, the lowest
|
|
8 bits of *duty_u16* are insignificant. So::
|
|
|
|
pwm=PWM(Pin(13), freq=300_000, duty_u16=2**16//2)
|
|
|
|
and::
|
|
|
|
pwm=PWM(Pin(13), freq=300_000, duty_u16=2**16//2 + 255)
|
|
|
|
will generate PWM with the same 50% duty cycle.
|
|
|