You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
114 lines
3.4 KiB
114 lines
3.4 KiB
.. currentmodule:: pyb
|
|
.. _pyb.ExtInt:
|
|
|
|
class ExtInt -- configure I/O pins to interrupt on external events
|
|
==================================================================
|
|
|
|
There are a total of 22 interrupt lines. 16 of these can come from GPIO pins
|
|
and the remaining 6 are from internal sources.
|
|
|
|
For lines 0 through 15, a given line can map to the corresponding line from an
|
|
arbitrary port. So line 0 can map to Px0 where x is A, B, C, ... and
|
|
line 1 can map to Px1 where x is A, B, C, ... ::
|
|
|
|
def callback(line):
|
|
print("line =", line)
|
|
|
|
Note: ExtInt will automatically configure the gpio line as an input. ::
|
|
|
|
extint = pyb.ExtInt(pin, pyb.ExtInt.IRQ_FALLING, pyb.Pin.PULL_UP, callback)
|
|
|
|
Now every time a falling edge is seen on the X1 pin, the callback will be
|
|
called. Caution: mechanical pushbuttons have "bounce" and pushing or
|
|
releasing a switch will often generate multiple edges.
|
|
See: http://www.eng.utah.edu/~cs5780/debouncing.pdf for a detailed
|
|
explanation, along with various techniques for debouncing.
|
|
|
|
Trying to register 2 callbacks onto the same pin will throw an exception.
|
|
|
|
If pin is passed as an integer, then it is assumed to map to one of the
|
|
internal interrupt sources, and must be in the range 16 through 22.
|
|
|
|
All other pin objects go through the pin mapper to come up with one of the
|
|
gpio pins. ::
|
|
|
|
extint = pyb.ExtInt(pin, mode, pull, callback)
|
|
|
|
Valid modes are pyb.ExtInt.IRQ_RISING, pyb.ExtInt.IRQ_FALLING,
|
|
pyb.ExtInt.IRQ_RISING_FALLING, pyb.ExtInt.EVT_RISING,
|
|
pyb.ExtInt.EVT_FALLING, and pyb.ExtInt.EVT_RISING_FALLING.
|
|
|
|
Only the IRQ_xxx modes have been tested. The EVT_xxx modes have
|
|
something to do with sleep mode and the WFE instruction.
|
|
|
|
Valid pull values are pyb.Pin.PULL_UP, pyb.Pin.PULL_DOWN, pyb.Pin.PULL_NONE.
|
|
|
|
There is also a C API, so that drivers which require EXTI interrupt lines
|
|
can also use this code. See extint.h for the available functions and
|
|
usrsw.h for an example of using this.
|
|
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: pyb.ExtInt(pin, mode, pull, callback)
|
|
|
|
Create an ExtInt object:
|
|
|
|
- ``pin`` is the pin on which to enable the interrupt (can be a pin object or any valid pin name).
|
|
- ``mode`` can be one of:
|
|
- ``ExtInt.IRQ_RISING`` - trigger on a rising edge;
|
|
- ``ExtInt.IRQ_FALLING`` - trigger on a falling edge;
|
|
- ``ExtInt.IRQ_RISING_FALLING`` - trigger on a rising or falling edge.
|
|
- ``pull`` can be one of:
|
|
- ``pyb.Pin.PULL_NONE`` - no pull up or down resistors;
|
|
- ``pyb.Pin.PULL_UP`` - enable the pull-up resistor;
|
|
- ``pyb.Pin.PULL_DOWN`` - enable the pull-down resistor.
|
|
- ``callback`` is the function to call when the interrupt triggers. The
|
|
callback function must accept exactly 1 argument, which is the line that
|
|
triggered the interrupt.
|
|
|
|
|
|
Class methods
|
|
-------------
|
|
|
|
.. classmethod:: ExtInt.regs()
|
|
|
|
Dump the values of the EXTI registers.
|
|
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: ExtInt.disable()
|
|
|
|
Disable the interrupt associated with the ExtInt object.
|
|
This could be useful for debouncing.
|
|
|
|
.. method:: ExtInt.enable()
|
|
|
|
Enable a disabled interrupt.
|
|
|
|
.. method:: ExtInt.line()
|
|
|
|
Return the line number that the pin is mapped to.
|
|
|
|
.. method:: ExtInt.swint()
|
|
|
|
Trigger the callback from software.
|
|
|
|
|
|
Constants
|
|
---------
|
|
|
|
.. data:: ExtInt.IRQ_FALLING
|
|
|
|
interrupt on a falling edge
|
|
|
|
.. data:: ExtInt.IRQ_RISING
|
|
|
|
interrupt on a rising edge
|
|
|
|
.. data:: ExtInt.IRQ_RISING_FALLING
|
|
|
|
interrupt on a rising or falling edge
|
|
|