You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
98 lines
3.0 KiB
98 lines
3.0 KiB
"""
|
|
DS18x20 temperature sensor driver for MicroPython.
|
|
|
|
This driver uses the OneWire driver to control DS18S20 and DS18B20
|
|
temperature sensors. It supports multiple devices on the same 1-wire bus.
|
|
|
|
The following example assumes the ground of your DS18x20 is connected to
|
|
Y11, vcc is connected to Y9 and the data pin is connected to Y10.
|
|
|
|
>>> from pyb import Pin
|
|
>>> gnd = Pin('Y11', Pin.OUT_PP)
|
|
>>> gnd.low()
|
|
>>> vcc = Pin('Y9', Pin.OUT_PP)
|
|
>>> vcc.high()
|
|
|
|
>>> from ds18x20 import DS18X20
|
|
>>> d = DS18X20(Pin('Y10'))
|
|
|
|
Call read_temps to read all sensors:
|
|
|
|
>>> result = d.read_temps()
|
|
>>> print(result)
|
|
[20.875, 20.8125]
|
|
|
|
Call read_temp to read the temperature of a specific sensor:
|
|
|
|
>>> result = d.read_temp(d.roms[0])
|
|
>>> print(result)
|
|
20.25
|
|
|
|
If only one DS18x20 is attached to the bus, then you don't need to
|
|
pass a ROM to read_temp:
|
|
|
|
>>> result = d.read_temp()
|
|
>>> print(result)
|
|
20.25
|
|
|
|
"""
|
|
|
|
from onewire import OneWire
|
|
|
|
class DS18X20(object):
|
|
def __init__(self, pin):
|
|
self.ow = OneWire(pin)
|
|
# Scan the 1-wire devices, but only keep those which have the
|
|
# correct # first byte in their rom for a DS18x20 device.
|
|
self.roms = [rom for rom in self.ow.scan() if rom[0] == 0x10 or rom[0] == 0x28]
|
|
|
|
def read_temp(self, rom=None):
|
|
"""
|
|
Read and return the temperature of one DS18x20 device.
|
|
Pass the 8-byte bytes object with the ROM of the specific device you want to read.
|
|
If only one DS18x20 device is attached to the bus you may omit the rom parameter.
|
|
"""
|
|
rom = rom or self.roms[0]
|
|
ow = self.ow
|
|
ow.reset()
|
|
ow.select_rom(rom)
|
|
ow.write_byte(0x44) # Convert Temp
|
|
while True:
|
|
if ow.read_bit():
|
|
break
|
|
ow.reset()
|
|
ow.select_rom(rom)
|
|
ow.write_byte(0xbe) # Read scratch
|
|
data = ow.read_bytes(9)
|
|
return self.convert_temp(rom[0], data)
|
|
|
|
def read_temps(self):
|
|
"""
|
|
Read and return the temperatures of all attached DS18x20 devices.
|
|
"""
|
|
temps = []
|
|
for rom in self.roms:
|
|
temps.append(self.read_temp(rom))
|
|
return temps
|
|
|
|
def convert_temp(self, rom0, data):
|
|
"""
|
|
Convert the raw temperature data into degrees celsius and return as a float.
|
|
"""
|
|
temp_lsb = data[0]
|
|
temp_msb = data[1]
|
|
if rom0 == 0x10:
|
|
if temp_msb != 0:
|
|
# convert negative number
|
|
temp_read = temp_lsb >> 1 | 0x80 # truncate bit 0 by shifting, fill high bit with 1.
|
|
temp_read = -((~temp_read + 1) & 0xff) # now convert from two's complement
|
|
else:
|
|
temp_read = temp_lsb >> 1 # truncate bit 0 by shifting
|
|
count_remain = data[6]
|
|
count_per_c = data[7]
|
|
temp = temp_read - 0.25 + (count_per_c - count_remain) / count_per_c
|
|
return temp
|
|
elif rom0 == 0x28:
|
|
return (temp_msb << 8 | temp_lsb) / 16
|
|
else:
|
|
assert False
|
|
|