You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
44 lines
1.2 KiB
44 lines
1.2 KiB
# Example using PIO to create a UART TX interface
|
|
|
|
from machine import Pin
|
|
from rp2 import PIO, StateMachine, asm_pio
|
|
|
|
UART_BAUD = 115200
|
|
PIN_BASE = 10
|
|
NUM_UARTS = 8
|
|
|
|
|
|
@asm_pio(sideset_init=PIO.OUT_HIGH, out_init=PIO.OUT_HIGH, out_shiftdir=PIO.SHIFT_RIGHT)
|
|
def uart_tx():
|
|
# fmt: off
|
|
# Block with TX deasserted until data available
|
|
pull()
|
|
# Initialise bit counter, assert start bit for 8 cycles
|
|
set(x, 7) .side(0) [7]
|
|
# Shift out 8 data bits, 8 execution cycles per bit
|
|
label("bitloop")
|
|
out(pins, 1) [6]
|
|
jmp(x_dec, "bitloop")
|
|
# Assert stop bit for 8 cycles total (incl 1 for pull())
|
|
nop() .side(1) [6]
|
|
# fmt: on
|
|
|
|
|
|
# Now we add 8 UART TXs, on pins 10 to 17. Use the same baud rate for all of them.
|
|
uarts = []
|
|
for i in range(NUM_UARTS):
|
|
sm = StateMachine(
|
|
i, uart_tx, freq=8 * UART_BAUD, sideset_base=Pin(PIN_BASE + i), out_base=Pin(PIN_BASE + i)
|
|
)
|
|
sm.active(1)
|
|
uarts.append(sm)
|
|
|
|
# We can print characters from each UART by pushing them to the TX FIFO
|
|
def pio_uart_print(sm, s):
|
|
for c in s:
|
|
sm.put(ord(c))
|
|
|
|
|
|
# Print a different message from each UART
|
|
for i, u in enumerate(uarts):
|
|
pio_uart_print(u, "Hello from UART {}!\n".format(i))
|
|
|