You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
81 lines
2.6 KiB
81 lines
2.6 KiB
Network basics
|
|
==============
|
|
|
|
The network module is used to configure the WiFi connection. There are two WiFi
|
|
interfaces, one for the station (when the ESP8266 connects to a router) and one
|
|
for the access point (for other devices to connect to the ESP8266). Create
|
|
instances of these objects using::
|
|
|
|
>>> import network
|
|
>>> sta_if = network.WLAN(network.STA_IF)
|
|
>>> ap_if = network.WLAN(network.AP_IF)
|
|
|
|
You can check if the interfaces are active by::
|
|
|
|
>>> sta_if.active()
|
|
False
|
|
>>> ap_if.active()
|
|
True
|
|
|
|
You can also check the network settings of the interface by::
|
|
|
|
>>> ap.ifconfig()
|
|
('192.168.4.1', '255.255.255.0', '192.168.4.1', '8.8.8.8')
|
|
|
|
The returned values are: IP address, netmask, gateway, DNS.
|
|
|
|
Configuration of the WiFi
|
|
-------------------------
|
|
|
|
Upon a fresh install the ESP8266 is configured in access point mode, so the
|
|
AP_IF interface is active and the STA_IF interface is inactive. You can
|
|
configure the module to connect to your own network using the STA_IF interface.
|
|
|
|
First activate the station interface::
|
|
|
|
>>> sta_if.active(True)
|
|
|
|
Then connect to your WiFi network::
|
|
|
|
>>> sta_if.connect('<your ESSID>', '<your password>')
|
|
|
|
To check if the connection is established use::
|
|
|
|
>>> sta_if.isconnected()
|
|
|
|
Once established you can check the IP address::
|
|
|
|
>>> sta_if.ifconfig()
|
|
('192.168.0.2', '255.255.255.0', '192.168.0.1', '8.8.8.8')
|
|
|
|
You can then disable the access-point interface if you no longer need it::
|
|
|
|
>>> ap_if.active(False)
|
|
|
|
Here is a function you can run (or put in your boot.py file) to automatically
|
|
connect to your WiFi network::
|
|
|
|
def do_connect():
|
|
import network
|
|
sta_if = network.WLAN(network.STA_IF)
|
|
if not sta_if.isconnected():
|
|
print('connecting to network...')
|
|
sta_if.active(True)
|
|
sta_if.connect('<essid>', '<password>')
|
|
while not sta_if.isconnected():
|
|
pass
|
|
print('network config:', sta_if.ifconfig())
|
|
|
|
Sockets
|
|
-------
|
|
|
|
Once the WiFi is set up the way to access the network is by using sockets.
|
|
A socket represents an endpoint on a network device, and when two sockets are
|
|
connected together communication can proceed.
|
|
Internet protocols are built on top of sockets, such as email (SMTP), the web
|
|
(HTTP), telnet, ssh, among many others. Each of these protocols is assigned
|
|
a specific port, which is just an integer. Given an IP address and a port
|
|
number you can connect to a remote device and start talking with it.
|
|
|
|
The next part of the tutorial discusses how to use sockets to do some common
|
|
and useful network tasks.
|
|
|