You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
283 lines
8.3 KiB
283 lines
8.3 KiB
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019-2020 Damien P. George
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
|
|
#include "py/runtime.h"
|
|
#include "py/mphal.h"
|
|
#include "pin_static_af.h"
|
|
#include "uart.h"
|
|
#include "extmod/mpbthci.h"
|
|
|
|
#if MICROPY_PY_NETWORK_CYW43
|
|
|
|
extern const char fw_4343WA1_7_45_98_50_start;
|
|
#define CYWBT_FW_ADDR (&fw_4343WA1_7_45_98_50_start + 749 * 512 + 29 * 256)
|
|
|
|
// Provided by the port.
|
|
extern pyb_uart_obj_t mp_bluetooth_hci_uart_obj;
|
|
|
|
// Provided by the port, and also possibly shared with the stack.
|
|
extern uint8_t mp_bluetooth_hci_cmd_buf[4 + 256];
|
|
|
|
/******************************************************************************/
|
|
// CYW BT HCI low-level driver
|
|
|
|
STATIC void cywbt_wait_cts_low(void) {
|
|
mp_hal_pin_config(pyb_pin_BT_CTS, MP_HAL_PIN_MODE_INPUT, MP_HAL_PIN_PULL_UP, 0);
|
|
for (int i = 0; i < 200; ++i) {
|
|
if (mp_hal_pin_read(pyb_pin_BT_CTS) == 0) {
|
|
break;
|
|
}
|
|
mp_hal_delay_ms(1);
|
|
}
|
|
mp_hal_pin_config_alt(pyb_pin_BT_CTS, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, AF_FN_UART, mp_bluetooth_hci_uart_obj.uart_id);
|
|
}
|
|
|
|
STATIC int cywbt_hci_cmd_raw(size_t len, uint8_t *buf) {
|
|
uart_tx_strn(&mp_bluetooth_hci_uart_obj, (void*)buf, len);
|
|
for (int i = 0; i < 6; ++i) {
|
|
while (!uart_rx_any(&mp_bluetooth_hci_uart_obj)) {
|
|
MICROPY_EVENT_POLL_HOOK
|
|
}
|
|
buf[i] = uart_rx_char(&mp_bluetooth_hci_uart_obj);
|
|
}
|
|
|
|
// expect a comand complete event (event 0x0e)
|
|
if (buf[0] != 0x04 || buf[1] != 0x0e) {
|
|
printf("unknown response: %02x %02x %02x %02x\n", buf[0], buf[1], buf[2], buf[3]);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
if buf[3:6] != cmd[:3]:
|
|
print('response doesn\'t match cmd:', cmd, ev)
|
|
return b''
|
|
*/
|
|
|
|
int sz = buf[2] - 3;
|
|
for (int i = 0; i < sz; ++i) {
|
|
while (!uart_rx_any(&mp_bluetooth_hci_uart_obj)) {
|
|
MICROPY_EVENT_POLL_HOOK
|
|
}
|
|
buf[i] = uart_rx_char(&mp_bluetooth_hci_uart_obj);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
STATIC int cywbt_hci_cmd(int ogf, int ocf, size_t param_len, const uint8_t *param_buf) {
|
|
uint8_t *buf = mp_bluetooth_hci_cmd_buf;
|
|
buf[0] = 0x01;
|
|
buf[1] = ocf;
|
|
buf[2] = ogf << 2 | ocf >> 8;
|
|
buf[3] = param_len;
|
|
if (param_len) {
|
|
memcpy(buf + 4, param_buf, param_len);
|
|
}
|
|
return cywbt_hci_cmd_raw(4 + param_len, buf);
|
|
}
|
|
|
|
STATIC void put_le16(uint8_t *buf, uint16_t val) {
|
|
buf[0] = val;
|
|
buf[1] = val >> 8;
|
|
}
|
|
|
|
STATIC void put_le32(uint8_t *buf, uint32_t val) {
|
|
buf[0] = val;
|
|
buf[1] = val >> 8;
|
|
buf[2] = val >> 16;
|
|
buf[3] = val >> 24;
|
|
}
|
|
|
|
STATIC int cywbt_set_baudrate(uint32_t baudrate) {
|
|
uint8_t buf[6];
|
|
put_le16(buf, 0);
|
|
put_le32(buf + 2, baudrate);
|
|
return cywbt_hci_cmd(0x3f, 0x18, 6, buf);
|
|
}
|
|
|
|
// download firmware
|
|
STATIC int cywbt_download_firmware(const uint8_t *firmware) {
|
|
cywbt_hci_cmd(0x3f, 0x2e, 0, NULL);
|
|
|
|
bool last_packet = false;
|
|
while (!last_packet) {
|
|
uint8_t *buf = mp_bluetooth_hci_cmd_buf;
|
|
memcpy(buf + 1, firmware, 3);
|
|
firmware += 3;
|
|
last_packet = buf[1] == 0x4e;
|
|
if (buf[2] != 0xfc) {
|
|
printf("fail1 %02x\n", buf[2]);
|
|
break;
|
|
}
|
|
uint8_t len = buf[3];
|
|
|
|
memcpy(buf + 4, firmware, len);
|
|
firmware += len;
|
|
|
|
buf[0] = 1;
|
|
cywbt_hci_cmd_raw(4 + len, buf);
|
|
if (buf[0] != 0) {
|
|
printf("fail3 %02x\n", buf[0]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
// RF switch must select high path during BT patch boot
|
|
#if MICROPY_HW_ENABLE_RF_SWITCH
|
|
mp_hal_pin_config(pyb_pin_WL_GPIO_1, MP_HAL_PIN_MODE_INPUT, MP_HAL_PIN_PULL_UP, 0);
|
|
#endif
|
|
mp_hal_delay_ms(10); // give some time for CTS to go high
|
|
cywbt_wait_cts_low();
|
|
#if MICROPY_HW_ENABLE_RF_SWITCH
|
|
mp_hal_pin_config(pyb_pin_WL_GPIO_1, MP_HAL_PIN_MODE_INPUT, MP_HAL_PIN_PULL_DOWN, 0); // Select chip antenna (could also select external)
|
|
#endif
|
|
|
|
mp_bluetooth_hci_uart_set_baudrate(115200);
|
|
cywbt_set_baudrate(3000000);
|
|
mp_bluetooth_hci_uart_set_baudrate(3000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mp_bluetooth_hci_controller_init(void) {
|
|
// This is called immediately after the UART is initialised during stack initialisation.
|
|
|
|
mp_hal_pin_output(pyb_pin_BT_REG_ON);
|
|
mp_hal_pin_low(pyb_pin_BT_REG_ON);
|
|
mp_hal_pin_input(pyb_pin_BT_HOST_WAKE);
|
|
mp_hal_pin_output(pyb_pin_BT_DEV_WAKE);
|
|
mp_hal_pin_low(pyb_pin_BT_DEV_WAKE);
|
|
|
|
#if MICROPY_HW_ENABLE_RF_SWITCH
|
|
// TODO don't select antenna if wifi is enabled
|
|
mp_hal_pin_config(pyb_pin_WL_GPIO_4, MP_HAL_PIN_MODE_OUTPUT, MP_HAL_PIN_PULL_NONE, 0); // RF-switch power
|
|
mp_hal_pin_high(pyb_pin_WL_GPIO_4); // Turn the RF-switch on
|
|
#endif
|
|
|
|
uint8_t buf[256];
|
|
|
|
mp_hal_pin_low(pyb_pin_BT_REG_ON);
|
|
mp_bluetooth_hci_uart_set_baudrate(115200);
|
|
mp_hal_delay_ms(100);
|
|
mp_hal_pin_high(pyb_pin_BT_REG_ON);
|
|
cywbt_wait_cts_low();
|
|
|
|
// Reset
|
|
cywbt_hci_cmd(0x03, 0x0003, 0, NULL);
|
|
|
|
// Change baudrate
|
|
cywbt_set_baudrate(3000000);
|
|
mp_bluetooth_hci_uart_set_baudrate(3000000);
|
|
|
|
cywbt_download_firmware((const uint8_t*)CYWBT_FW_ADDR);
|
|
|
|
// Reset
|
|
cywbt_hci_cmd(0x03, 0x0003, 0, NULL);
|
|
|
|
// Set BD_ADDR (sent as little endian)
|
|
uint8_t bdaddr[6];
|
|
mp_hal_get_mac(MP_HAL_MAC_BDADDR, bdaddr);
|
|
buf[0] = bdaddr[5];
|
|
buf[1] = bdaddr[4];
|
|
buf[2] = bdaddr[3];
|
|
buf[3] = bdaddr[2];
|
|
buf[4] = bdaddr[1];
|
|
buf[5] = bdaddr[0];
|
|
cywbt_hci_cmd(0x3f, 0x0001, 6, buf);
|
|
|
|
// Set local name
|
|
// memset(buf, 0, 248);
|
|
// memcpy(buf, "PYBD-BLE", 8);
|
|
// cywbt_hci_cmd(0x03, 0x0013, 248, buf);
|
|
|
|
// Configure sleep mode
|
|
cywbt_hci_cmd(0x3f, 0x27, 12, (const uint8_t*)"\x01\x02\x02\x00\x00\x00\x01\x00\x00\x00\x00\x00");
|
|
|
|
// HCI_Write_LE_Host_Support
|
|
cywbt_hci_cmd(3, 109, 2, (const uint8_t*)"\x01\x00");
|
|
|
|
mp_hal_pin_high(pyb_pin_BT_DEV_WAKE); // let sleep
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mp_bluetooth_hci_controller_deinit(void) {
|
|
mp_hal_pin_low(pyb_pin_BT_REG_ON);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef pyb_pin_BT_DEV_WAKE
|
|
STATIC uint32_t bt_sleep_ticks;
|
|
#endif
|
|
|
|
int mp_bluetooth_hci_controller_sleep_maybe(void) {
|
|
#ifdef pyb_pin_BT_DEV_WAKE
|
|
if (mp_hal_pin_read(pyb_pin_BT_DEV_WAKE) == 0) {
|
|
if (mp_hal_ticks_ms() - bt_sleep_ticks > 500) {
|
|
mp_hal_pin_high(pyb_pin_BT_DEV_WAKE); // let sleep
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
bool mp_bluetooth_hci_controller_woken(void) {
|
|
#ifdef pyb_pin_BT_HOST_WAKE
|
|
bool host_wake = mp_hal_pin_read(pyb_pin_BT_HOST_WAKE);
|
|
/*
|
|
// this is just for info/tracing purposes
|
|
static bool last_host_wake = false;
|
|
if (host_wake != last_host_wake) {
|
|
printf("HOST_WAKE change %d -> %d\n", last_host_wake, host_wake);
|
|
last_host_wake = host_wake;
|
|
}
|
|
*/
|
|
return host_wake;
|
|
#else
|
|
return true;
|
|
#endif
|
|
}
|
|
|
|
int mp_bluetooth_hci_controller_wakeup(void) {
|
|
#ifdef pyb_pin_BT_DEV_WAKE
|
|
bt_sleep_ticks = mp_hal_ticks_ms();
|
|
|
|
if (mp_hal_pin_read(pyb_pin_BT_DEV_WAKE) == 1) {
|
|
mp_hal_pin_low(pyb_pin_BT_DEV_WAKE); // wake up
|
|
// Use delay_us rather than delay_ms to prevent running the scheduler (which
|
|
// might result in more BLE operations).
|
|
mp_hal_delay_us(5000); // can't go lower than this
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|