You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
744 lines
21 KiB
744 lines
21 KiB
//*****************************************************************************
|
|
//
|
|
// sdhost.c
|
|
//
|
|
// Driver for the SD Host (SDHost) Interface
|
|
//
|
|
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
|
|
//
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup Secure_Digital_Host_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include "inc/hw_types.h"
|
|
#include "inc/hw_memmap.h"
|
|
#include "inc/hw_mmchs.h"
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_apps_config.h"
|
|
#include "interrupt.h"
|
|
#include "sdhost.h"
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures SDHost module.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//!
|
|
//! This function configures the SDHost module, enabling internal sub-modules.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostInit(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Assert module reset
|
|
//
|
|
HWREG(ulBase + MMCHS_O_SYSCONFIG) = 0x2;
|
|
|
|
//
|
|
// Wait for soft reset to complete
|
|
//
|
|
while( !(HWREG(ulBase + MMCHS_O_SYSCONFIG) & 0x1) )
|
|
{
|
|
|
|
}
|
|
|
|
//
|
|
// Assert internal reset
|
|
//
|
|
HWREG(ulBase + MMCHS_O_SYSCTL) |= (1 << 24);
|
|
|
|
//
|
|
// Wait for Reset to complete
|
|
//
|
|
while( (HWREG(ulBase + MMCHS_O_SYSCTL) & (0x1 << 24)) )
|
|
{
|
|
|
|
}
|
|
|
|
//
|
|
// Set capability register, 1.8 and 3.0 V
|
|
//
|
|
HWREG(ulBase + MMCHS_O_CAPA) = (0x7 <<24);
|
|
|
|
//
|
|
// Select bus voltage, 3.0 V
|
|
//
|
|
HWREG(ulBase + MMCHS_O_HCTL) |= 0x7 << 9;
|
|
|
|
//
|
|
// Power up the bus
|
|
//
|
|
HWREG(ulBase + MMCHS_O_HCTL) |= 1 << 8;
|
|
|
|
//
|
|
// Wait for power on
|
|
//
|
|
while( !(HWREG(ulBase + MMCHS_O_HCTL) & (1<<8)) )
|
|
{
|
|
|
|
}
|
|
|
|
HWREG(ulBase + MMCHS_O_CON) |= 1 << 21;
|
|
|
|
//
|
|
// Un-mask all events
|
|
//
|
|
HWREG(ulBase + MMCHS_O_IE) = 0xFFFFFFFF;
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Resets SDHost command line
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//!
|
|
//! This function assers a soft reset for the command line
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostCmdReset(unsigned long ulBase)
|
|
{
|
|
HWREG(ulBase + MMCHS_O_SYSCTL) |= 1 << 25;
|
|
while( (HWREG(ulBase + MMCHS_O_SYSCTL) & (1 << 25)) )
|
|
{
|
|
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sends command over SDHost interface
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param ulCmd is the command to send.
|
|
//! \param ulArg is the argument for the command.
|
|
//!
|
|
//! This function send command to the attached card over the SDHost interface.
|
|
//!
|
|
//! The \e ulCmd parameter can be one of \b SDHOST_CMD_0 to \b SDHOST_CMD_63.
|
|
//! It can be logically ORed with one or more of the following:
|
|
//! - \b SDHOST_MULTI_BLK for multi-block transfer
|
|
//! - \b SDHOST_WR_CMD if command is followed by write data
|
|
//! - \b SDHOST_RD_CMD if command is followed by read data
|
|
//! - \b SDHOST_DMA_EN if SDHost need to generate DMA request.
|
|
//! - \b SDHOST_RESP_LEN_136 if 136 bit response is expected
|
|
//! - \b SDHOST_RESP_LEN_48 if 48 bit response is expected
|
|
//! - \b SDHOST_RESP_LEN_48B if 48 bit response with busy bit is expected
|
|
//!
|
|
//! The parameter \e ulArg is the argument for the command
|
|
//!
|
|
//! \return Returns 0 on success, -1 otherwise.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
SDHostCmdSend(unsigned long ulBase, unsigned long ulCmd, unsigned ulArg)
|
|
{
|
|
//
|
|
// Set Data Timeout
|
|
//
|
|
HWREG(ulBase + MMCHS_O_SYSCTL) |= 0x000E0000;
|
|
|
|
//
|
|
// Check for cmd inhabit
|
|
//
|
|
if( (HWREG(ulBase + MMCHS_O_PSTATE) & 0x1))
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
//
|
|
// Set the argument
|
|
//
|
|
HWREG(ulBase + MMCHS_O_ARG) = ulArg;
|
|
|
|
//
|
|
// Send the command
|
|
//
|
|
HWREG(ulBase + MMCHS_O_CMD) = ulCmd;
|
|
|
|
return 0;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes a data word into the SDHost write buffer.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param ulData is data word to be transfered.
|
|
//!
|
|
//! This function writes a single data word into the SDHost write buffer. The
|
|
//! function returns \b true if there was a space available in the buffer else
|
|
//! returns \b false.
|
|
//!
|
|
//! \return Return \b true on success, \b false otherwise.
|
|
//
|
|
//*****************************************************************************
|
|
tBoolean
|
|
SDHostDataNonBlockingWrite(unsigned long ulBase, unsigned long ulData)
|
|
{
|
|
|
|
//
|
|
// See if there is a space in the write buffer
|
|
//
|
|
if( (HWREG(ulBase + MMCHS_O_PSTATE) & (1<<10)) )
|
|
{
|
|
//
|
|
// Write the data into the buffer
|
|
//
|
|
HWREG(ulBase + MMCHS_O_DATA) = ulData;
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(true);
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// No free sapce, failure.
|
|
//
|
|
return(false);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Waits to write a data word into the SDHost write buffer.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param ulData is data word to be transfered.
|
|
//!
|
|
//! This function writes \e ulData into the SDHost write buffer. If there is no
|
|
//! space in the write buffer this function waits until there is a space
|
|
//! available before returning.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostDataWrite(unsigned long ulBase, unsigned long ulData)
|
|
{
|
|
//
|
|
// Wait until space is available
|
|
//
|
|
while( !(HWREG(ulBase + MMCHS_O_PSTATE) & (1<<10)) )
|
|
{
|
|
|
|
}
|
|
|
|
//
|
|
// Write the data
|
|
//
|
|
HWREG(ulBase + MMCHS_O_DATA) = ulData;
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Waits for a data word from the SDHost read buffer
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param pulData is pointer to read data variable.
|
|
//!
|
|
//! This function reads a single data word from the SDHost read buffer. If there
|
|
//! is no data available in the buffer the function will wait until a data
|
|
//! word is received before returning.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostDataRead(unsigned long ulBase, unsigned long *pulData)
|
|
{
|
|
//
|
|
// Wait until data is available
|
|
//
|
|
while( !(HWREG(ulBase + MMCHS_O_PSTATE) & (1<<11)) )
|
|
{
|
|
|
|
}
|
|
|
|
//
|
|
// Read the data
|
|
//
|
|
*pulData = HWREG(ulBase + MMCHS_O_DATA);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads single data word from the SDHost read buffer
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param pulData is pointer to read data variable.
|
|
//!
|
|
//! This function reads a data word from the SDHost read buffer. The
|
|
//! function returns \b true if there was data available in to buffer else
|
|
//! returns \b false.
|
|
//!
|
|
//! \return Return \b true on success, \b false otherwise.
|
|
//
|
|
//*****************************************************************************
|
|
tBoolean
|
|
SDHostDataNonBlockingRead(unsigned long ulBase, unsigned long *pulData)
|
|
{
|
|
|
|
//
|
|
// See if there is any data in the read buffer.
|
|
//
|
|
if( (HWREG(ulBase + MMCHS_O_PSTATE) & (1<11)) )
|
|
{
|
|
//
|
|
// Read the data word.
|
|
//
|
|
*pulData = HWREG(ulBase + MMCHS_O_DATA);
|
|
|
|
//
|
|
// Success
|
|
//
|
|
return(true);
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// No data available, failure.
|
|
//
|
|
return(false);
|
|
}
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers the interrupt handler for SDHost interrupt
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//! \param pfnHandler is a pointer to the function to be called when the
|
|
//! SDHost interrupt occurs.
|
|
//!
|
|
//! This function does the actual registering of the interrupt handler. This
|
|
//! function enables the global interrupt in the interrupt controller; specific
|
|
//! SDHost interrupts must be enabled via SDHostIntEnable(). It is the
|
|
//! interrupt handler's responsibility to clear the interrupt source.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostIntRegister(unsigned long ulBase, void (*pfnHandler)(void))
|
|
{
|
|
//
|
|
// Register the interrupt handler.
|
|
//
|
|
IntRegister(INT_MMCHS, pfnHandler);
|
|
|
|
//
|
|
// Enable the SDHost interrupt.
|
|
//
|
|
IntEnable(INT_MMCHS);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters the interrupt handler for SDHost interrupt
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//!
|
|
//! This function does the actual unregistering of the interrupt handler. It
|
|
//! clears the handler to be called when a SDHost interrupt occurs. This
|
|
//! function also masks off the interrupt in the interrupt controller so that
|
|
//! the interrupt handler no longer is called.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostIntUnregister(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Disable the SDHost interrupt.
|
|
//
|
|
IntDisable(INT_MMCHS);
|
|
|
|
//
|
|
// Unregister the interrupt handler.
|
|
//
|
|
IntUnregister(INT_MMCHS);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enable individual interrupt source for the specified SDHost
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled.
|
|
//!
|
|
//! This function enables the indicated SDHost interrupt sources. Only the
|
|
//! sources that are enabled can be reflected to the processor interrupt;
|
|
//! disabled sources have no effect on the processor.
|
|
//!
|
|
//! The \e ulIntFlags parameter is the logical OR of any of the following:
|
|
//! - \b SDHOST_INT_CC Command Complete interrupt
|
|
//! - \b SDHOST_INT_TC Transfer Complete interrupt
|
|
//! - \b SDHOST_INT_BWR Buffer Write Ready interrupt
|
|
//! - \b SDHOST_INT_BRR Buffer Read Ready interrupt
|
|
//! - \b SDHOST_INT_ERRI Error interrupt
|
|
//! - \b SDHOST_INT_CTO Command Timeout error interrupt
|
|
//! - \b SDHOST_INT_CEB Command End Bit error interrupt
|
|
//! - \b SDHOST_INT_DTO Data Timeout error interrupt
|
|
//! - \b SDHOST_INT_DCRC Data CRC error interrupt
|
|
//! - \b SDHOST_INT_DEB Data End Bit error
|
|
//! - \b SDHOST_INT_CERR Cart Status Error interrupt
|
|
//! - \b SDHOST_INT_BADA Bad Data error interrupt
|
|
//! - \b SDHOST_INT_DMARD Read DMA done interrupt
|
|
//! - \b SDHOST_INT_DMAWR Write DMA done interrupt
|
|
//!
|
|
//! Note that SDHOST_INT_ERRI can only be used with \sa SDHostIntStatus()
|
|
//! and is internally logical OR of all error status bits. Setting this bit
|
|
//! alone as \e ulIntFlags doesn't generates any interrupt.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostIntEnable(unsigned long ulBase,unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Enable DMA done interrupts
|
|
//
|
|
HWREG(APPS_CONFIG_BASE + APPS_CONFIG_O_DMA_DONE_INT_MASK_CLR) =
|
|
(ulIntFlags >> 30);
|
|
|
|
//
|
|
// Enable the individual interrupt sources
|
|
//
|
|
HWREG(ulBase + MMCHS_O_ISE) |= (ulIntFlags & 0x3FFFFFFF);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enable individual interrupt source for the specified SDHost
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled.
|
|
//!
|
|
//! This function disables the indicated SDHost interrupt sources. Only the
|
|
//! sources that are enabled can be reflected to the processor interrupt;
|
|
//! disabled sources have no effect on the processor.
|
|
//!
|
|
//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags
|
|
//! parameter to SDHostIntEnable().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostIntDisable(unsigned long ulBase,unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Disable DMA done interrupts
|
|
//
|
|
HWREG(APPS_CONFIG_BASE + APPS_CONFIG_O_DMA_DONE_INT_MASK_SET) =
|
|
(ulIntFlags >> 30);
|
|
//
|
|
// Disable the individual interrupt sources
|
|
//
|
|
HWREG(ulBase + MMCHS_O_ISE) &= ~(ulIntFlags & 0x3FFFFFFF);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current interrupt status.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//!
|
|
//! This function returns the interrupt status for the specified SDHost.
|
|
//!
|
|
//! \return Returns the current interrupt status, enumerated as a bit field of
|
|
//! values described in SDHostIntEnable().
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
SDHostIntStatus(unsigned long ulBase)
|
|
{
|
|
unsigned long ulIntStatus;
|
|
|
|
//
|
|
// Get DMA done interrupt status
|
|
//
|
|
ulIntStatus = HWREG(APPS_CONFIG_BASE + APPS_CONFIG_O_DMA_DONE_INT_STS_RAW);
|
|
ulIntStatus = (ulIntStatus << 30);
|
|
|
|
//
|
|
// Return the status of individual interrupt sources
|
|
//
|
|
ulIntStatus |= (HWREG(ulBase + MMCHS_O_STAT) & 0x3FFFFFFF);
|
|
|
|
return(ulIntStatus);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears the individual interrupt sources.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module.
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared.
|
|
//!
|
|
//! The specified SDHost interrupt sources are cleared, so that they no longer
|
|
//! assert. This function must be called in the interrupt handler to keep the
|
|
//! interrupt from being recognized again immediately upon exit.
|
|
//!
|
|
//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags
|
|
//! parameter to SDHostIntEnable().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostIntClear(unsigned long ulBase,unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Clear DMA done interrupts
|
|
//
|
|
HWREG(APPS_CONFIG_BASE + APPS_CONFIG_O_DMA_DONE_INT_ACK) =
|
|
(ulIntFlags >> 30);
|
|
//
|
|
// Clear the individual interrupt sources
|
|
//
|
|
HWREG(ulBase + MMCHS_O_STAT) = (ulIntFlags & 0x3FFFFFFF);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the card status error mask.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//! \param ulErrMask is the bit mask of card status errors to be enabled
|
|
//!
|
|
//! This function sets the card status error mask for response type R1, R1b,
|
|
//! R5, R5b and R6 response. The parameter \e ulErrMask is the bit mask of card
|
|
//! status errors to be enabled, if the corresponding bits in the 'card status'
|
|
//! field of a respose are set then the host controller indicates a card error
|
|
//! interrupt status. Only bits referenced as type E (error) in status field in
|
|
//! the response can set a card status error.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostCardErrorMaskSet(unsigned long ulBase, unsigned long ulErrMask)
|
|
{
|
|
//
|
|
// Set the card status error mask
|
|
//
|
|
HWREG(ulBase + MMCHS_O_CSRE) = ulErrMask;
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the card status error mask.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//!
|
|
//! This function gets the card status error mask for response type R1, R1b,
|
|
//! R5, R5b and R6 response.
|
|
//!
|
|
//! \return Returns the current card status error.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
SDHostCardErrorMaskGet(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Return the card status error mask
|
|
//
|
|
return(HWREG(ulBase + MMCHS_O_CSRE));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the SD Card clock.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//! \param ulSDHostClk is the rate of clock supplied to SDHost module
|
|
//! \param ulCardClk is the required SD interface clock
|
|
//!
|
|
//! This function configures the SDHost interface to supply the specified clock
|
|
//! to the connected card.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostSetExpClk(unsigned long ulBase, unsigned long ulSDHostClk,
|
|
unsigned long ulCardClk)
|
|
{
|
|
unsigned long ulDiv;
|
|
|
|
//
|
|
// Disable card clock
|
|
//
|
|
HWREG(ulBase + MMCHS_O_SYSCTL) &= ~0x4;
|
|
|
|
//
|
|
// Enable internal clock
|
|
//
|
|
HWREG(ulBase + MMCHS_O_SYSCTL) |= 0x1;
|
|
|
|
ulDiv = ((ulSDHostClk/ulCardClk) & 0x3FF);
|
|
|
|
//
|
|
// Set clock divider,
|
|
//
|
|
HWREG(ulBase + MMCHS_O_SYSCTL) = ((HWREG(ulBase + MMCHS_O_SYSCTL) &
|
|
~0x0000FFC0)| (ulDiv) << 6);
|
|
|
|
//
|
|
// Wait for clock to stablize
|
|
//
|
|
while( !(HWREG(ulBase + MMCHS_O_SYSCTL) & 0x2) )
|
|
{
|
|
|
|
}
|
|
|
|
//
|
|
// Enable card clock
|
|
//
|
|
HWREG(ulBase + MMCHS_O_SYSCTL) |= 0x4;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Get the response for the last command.
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//! \param ulRespnse is 128-bit response.
|
|
//!
|
|
//! This function gets the response from the SD card for the last command
|
|
//! send.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostRespGet(unsigned long ulBase, unsigned long ulRespnse[4])
|
|
{
|
|
|
|
//
|
|
// Read the responses.
|
|
//
|
|
ulRespnse[0] = HWREG(ulBase + MMCHS_O_RSP10);
|
|
ulRespnse[1] = HWREG(ulBase + MMCHS_O_RSP32);
|
|
ulRespnse[2] = HWREG(ulBase + MMCHS_O_RSP54);
|
|
ulRespnse[3] = HWREG(ulBase + MMCHS_O_RSP76);
|
|
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Set the block size for data transfer
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//! \param ulBlkSize is the transfer block size in bytes
|
|
//!
|
|
//! This function sets the block size the data transfer.
|
|
//!
|
|
//! The parameter \e ulBlkSize is size of each data block in bytes.
|
|
//! This should be in range 0 - 2^10.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostBlockSizeSet(unsigned long ulBase, unsigned short ulBlkSize)
|
|
{
|
|
//
|
|
// Set the block size
|
|
//
|
|
HWREG(ulBase + MMCHS_O_BLK) = ((HWREG(ulBase + MMCHS_O_BLK) & 0x00000FFF)|
|
|
(ulBlkSize & 0xFFF));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Set the block size and count for data transfer
|
|
//!
|
|
//! \param ulBase is the base address of SDHost module
|
|
//! \param ulBlkCount is the number of blocks
|
|
//!
|
|
//! This function sets block count for the data transfer. This needs to be set
|
|
//! for each block transfer. \sa SDHostBlockSizeSet()
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SDHostBlockCountSet(unsigned long ulBase, unsigned short ulBlkCount)
|
|
{
|
|
unsigned long ulRegVal;
|
|
|
|
//
|
|
// Read the current value
|
|
//
|
|
ulRegVal = HWREG(ulBase + MMCHS_O_BLK);
|
|
|
|
//
|
|
// Set the number of blocks
|
|
//
|
|
HWREG(ulBase + MMCHS_O_BLK) = ((ulRegVal & 0x0000FFFF)|
|
|
(ulBlkCount << 16));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|
|
|