github
/
tinygo
mirror of https://github.com/tinygo-org/tinygo.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
3412 Commits
99 Branches
41 Tags
26 MiB
Tree: 66d3c4edb8
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '66d3c4edb8'
${ noResults }
tinygo/targets/trinket-m0.json

11 lines
268 B
Raw Normal View History

[Board] Adafruit Trinket (#333) * Add support for Adafruit Trinket-M0 board
6 years ago
{
"inherits": ["atsamd21e18a"],
sam: remove redundant build tags Some build tags were duplicated. This commit removes them.
4 years ago
"build-tags": ["trinket_m0"],
targets: add serial and serial-port key to JSON files for adafruit boards
3 years ago
"serial": "usb",
targets: remove "acm:"` prefix for USB vid/pid pair This prefix isn't actually used and only adds noise, so remove it. It may have been useful on Linux that makes a distinction between /dev/ttyACM* and /dev/ttyUSB* but it isn't now. Also, it's unlikely that the same vid/pid pair will be shared between an acm and usb driver anyway.
2 years ago
"serial-port": ["239a:801e"],
flash: support flashing boards using Mass Storage Device (MSD) operation for uf2 and daplink bootloaders Signed-off-by: Ron Evans <ron@hybridgroup.com>
5 years ago
"flash-1200-bps-reset": "true",
"flash-method": "msd",
targets: refactor flash/gdb target configuration Instead of specifying explicit commands, most of these commands have been replaced by more specific properties. This is work that will be necessary for an eventual -programmer flag to the compiler, with which it is possible to select which programmer to use to flash or debug a chip. That's not very useful for boards that already include a programmer or bootloader for that purpose, but is very useful for novel boards or single-purpose boards that are not already included in TinyGo.
5 years ago
"msd-volume-name": "TRINKETBOOT",
"msd-firmware-name": "firmware.uf2"
[Board] Adafruit Trinket (#333) * Add support for Adafruit Trinket-M0 board
6 years ago
}