tinygo/targets/particle-3rd-gen.json

{
	"inherits": ["nrf52840"],
	"build-tags": ["particle_3rd_gen"],
	"serial": "uart",
	"flash-method": "openocd",
	"openocd-interface": "cmsis-dap"
}
Add Argon and Boron 5 years ago			`{`
			`"inherits": ["nrf52840"],`
			`"build-tags": ["particle_3rd_gen"],`
all: add a flag to the command line to select the serial implementation This can be very useful for some purposes: * It makes it possible to disable the UART in cases where it is not needed or needs to be disabled to conserve power. * It makes it possible to disable the serial output to reduce code size, which may be important for some chips. Sometimes, a few kB can be saved this way. * It makes it possible to override the default, for example you might want to use an actual UART to debug the USB-CDC implementation. It also lowers the dependency on having machine.Serial defined, which is often not defined when targeting a chip. Eventually, we might want to make it possible to write `-target=nrf52` or `-target=atmega328p` for example to target the chip itself with no board specific assumptions. The defaults don't change. I checked this by running `make smoketest` before and after and comparing the results. 3 years ago			`"serial": "uart",`
Add Argon and Boron 5 years ago			`"flash-method": "openocd",`
			`"openocd-interface": "cmsis-dap"`
			`}`