machine/usb: set the vid and pid to valid values supplied by Adafruit and Arduino for boards that support USB CDC

Signed-off-by: Ron Evans <ron@hybridgroup.com>

src/machine/board_arduino_nano33.go

@@ -90,3 +90,14 @@ const (
 	I2S_SD_PIN  Pin = PA08
 	I2S_WS_PIN      = NoPin // TODO: figure out what this is on Arduino Nano 33.
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Arduino NANO 33 IoT"
+	usb_STRING_MANUFACTURER = "Arduino"
+)
+
+var (
+	usb_VID uint16 = 0x2341
+	usb_PID uint16 = 0x8057
+)

src/machine/board_circuitplay_express.go

@@ -88,3 +88,14 @@ const (
 	I2S_SD_PIN  = PA08
 	I2S_WS_PIN  = NoPin // no WS, instead uses SCK to sync
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Circuit Playground Express"
+	usb_STRING_MANUFACTURER = "Adafruit"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x8018
+)

src/machine/board_feather-m0.go

@@ -102,3 +102,14 @@ const (
 	I2S_SD_PIN  = PA08
 	I2S_WS_PIN  = NoPin // TODO: figure out what this is on Feather M0.
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Feather M0 Express"
+	usb_STRING_MANUFACTURER = "Adafruit"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x801B
+)

src/machine/board_feather-m4.go

@@ -87,3 +87,14 @@ var (
 		SERCOM: 1,
 	}
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Adafruit Feather M4"
+	usb_STRING_MANUFACTURER = "Adafruit LLC"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x8022
+)

src/machine/board_itsybitsy-m0.go

@@ -123,3 +123,14 @@ const (
 var (
 	I2S0 = I2S{Bus: sam.I2S}
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "ItsyBitsy M0 Express"
+	usb_STRING_MANUFACTURER = "Adafruit"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x800F
+)

src/machine/board_itsybitsy-m4.go

@@ -89,3 +89,14 @@ var (
 		SERCOM: 1,
 	}
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Adafruit ItsyBitsy M4"
+	usb_STRING_MANUFACTURER = "Adafruit LLC"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x802B
+)

src/machine/board_metro-m4-airlift.go

@@ -116,3 +116,14 @@ var (
 		SERCOM: 1,
 	}
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Adafruit Metro M4 Airlift Lite"
+	usb_STRING_MANUFACTURER = "Adafruit LLC"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x8037
+)

src/machine/board_pybadge.go

@@ -133,3 +133,14 @@ var (
 		SERCOM: 4,
 	}
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Adafruit pyBadge M4"
+	usb_STRING_MANUFACTURER = "Adafruit LLC"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x8033
+)

src/machine/board_pyportal.go

@@ -143,3 +143,14 @@ var (
 	}
 	NINA_SPI = SPI0
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Adafruit PyPortal M4"
+	usb_STRING_MANUFACTURER = "Adafruit LLC"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x8035
+)

src/machine/board_trinket.go

@@ -93,3 +93,14 @@ const (
 	I2S_SD_PIN  = PA08
 	I2S_WS_PIN  = NoPin // TODO: figure out what this is on Trinket M0.
 )
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Trinket M0"
+	usb_STRING_MANUFACTURER = "Adafruit"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x801E
+)

src/machine/usb.go

@@ -395,12 +395,7 @@ func strToUTF16LEDescriptor(in string) []byte {
 
 var (
 	// TODO: allow setting these
-	usb_STRING_LANGUAGE     = [2]uint16{(3 << 8) | (2 + 2), 0x0409} // English
-	usb_STRING_PRODUCT      = "Arduino Zero"
-	usb_STRING_MANUFACTURER = "Arduino"
-
-	usb_VID uint16 = 0x2341
-	usb_PID uint16 = 0x004d
+	usb_STRING_LANGUAGE = [2]uint16{(3 << 8) | (2 + 2), 0x0409} // English
 )
 
 const (