TODO: Remove the go.mod/go.sum in internal/tools once doing so doesn't break CI (e.g. once we drop support for go 1.19)
* builder/cc1as.h: fix typo found by 'make spell'
* GNUmakefile: remove exception for inbetween, fix instance now found by 'make spell'
* GNUmakefile: remove exception for programmmer, fix instance now found by 'make spell'
* go.mod: use updated misspell. GNUmakefile: add spellfix target, use it.
* ignore directories properly when invoking spellchecker.
* make spell: give internal/tools its own go.mod, as misspell requires newer go
* make lint: depend on tools and run the installed revive
(which was perhaps implied by the change that added revive to internal/tools,
but not required in GNUmakefile until we gave internal/tools its own temporary go.mod)
* .github: now that 'make spell' works well, run it from CI
* GNUmakefile: make spell now aborts if it finds misspelt words, so what it finds doesn't get lost in CI logs
* GNUmakefile: tools: avoid -C option on go generate to make test-llvm15-go119 circleci job happy, see
2af48cbb7d
* internal/tools/go.mod: fix format of go version to leave out patchlevel, else go complains.
getelementptr offsets are signed, not unsigned. Yet they were used as
unsigned integers in interp.
Somehow this worked most of the time, until finally there was some code
that did a getelementptr with a negative index.
The old LLVM pass manager is deprecated and should not be used anymore.
Moreover, the pass manager builder (which we used to set up a pass
pipeline) is actually removed from LLVM entirely in LLVM 17:
https://reviews.llvm.org/D145387https://reviews.llvm.org/D145835
The new pass manager does change the binary size in many cases: both
growing and shrinking it. However, on average the binary size remains
more or less the same.
This is needed as a preparation for LLVM 17.
This is a big change: apart from removing LLVM 14 it also removes typed
pointer support (which was only fully supported in LLVM up to version
14). This removes about 200 lines of code, but more importantly removes
a ton of special cases for LLVM 14.
The old traceback would look like this:
# internal/godebug
/usr/local/go/src/internal/godebug/godebug.go:101:11: interp: test
call <2> 0 <3> 0
traceback:
/usr/local/go/src/internal/godebug/godebug.go:101:11:
call <2> 0 <3> 0
/usr/local/go/src/internal/godebug:
call <1> 0
With this patch, it looks like this:
# io/fs
/usr/local/go/src/io/fs/fs.go:144:45: interp: test
%0 = load %runtime._interface, ptr @"internal/oserror.ErrInvalid", align 8, !dbg !316
traceback:
/usr/local/go/src/io/fs/fs.go:144:45:
%0 = load %runtime._interface, ptr @"internal/oserror.ErrInvalid", align 8, !dbg !316
/usr/local/go/src/io/fs/fs.go:137:28:
%0 = call %runtime._interface @"io/fs.errInvalid"(ptr undef), !dbg !317
For developers (like me) who are familiar with LLVM, this is probably
easier to read. For users, I'm not sure: the instructions have quite a
lot of distracting fluff in them. But at least it contains the function
names that are called (which are not currently present in the old
traceback).
...that said, having the LLVM instructions in a bug report is probably
going to be easier for people who are familar with LLVM.
This was bug https://github.com/tinygo-org/tinygo/issues/3890.
See the diff for details. Essentially, it means that `copy` in the
interpreter was copying data that wasn't known yet, or copying data into
a slice that could be read externally after the interp pass.
If a pointer value was xor'ed with a value other than 0, it would not
have been run at runtime but instead would fall through to the generic
integer operations. This would likely result in a "cannot convert
pointer to integer" panic.
This commit fixes this subtle case.
This is a big commit that changes the way runtime type information is stored in
the binary. Instead of compressing it and storing it in a number of sidetables,
it is stored similar to how the Go compiler toolchain stores it (but still more
compactly).
This has a number of advantages:
* It is much easier to add new features to reflect support. They can simply
be added to these structs without requiring massive changes (especially in
the reflect lowering pass).
* It removes the reflect lowering pass, which was a large amount of hard to
understand and debug code.
* The reflect lowering pass also required merging all LLVM IR into one
module, which is terrible for performance especially when compiling large
amounts of code. See issue 2870 for details.
* It is (probably!) easier to reason about for the compiler.
The downside is that it increases code size a bit, especially when reflect is
involved. I hope to fix some of that in later patches.
This implements the block-based GC as a partially precise GC. This means
that for most heap allocations it is known which words contain a pointer
and which don't. This should in theory make the GC faster (because it
can skip non-pointer object) and have fewer false positives in a GC
cycle. It does however use a bit more RAM to store the layout of each
object.
Right now this GC seems to be slower than the conservative GC, but
should be less likely to run out of memory as a result of false
positives.
This makes it much easier to read the value at runtime, as pointer
indices are naturally little endian. It should not affect anything else
in the program.
These instructions sometimes pop up in LLVM 15, but they never occured
in LLVM 14. Implementing them is relatively straightforward: simply
generalize the code that already exists for llvm.ICmp interpreting.
A number of llvm.Const* functions (in particular extractvalue and
insertvalue) were removed in LLVM 15, so we have to use a builder
instead. This builder will create the same constant values, it simply
uses a different API.
This change triggers a revert whenever a basic block runs instructions at runtime twice.
As a result, a loop body with runtime-only instructions will no longer be unrolled.
This should help some extreme cases where loops can be expanded into hundreds or thousands of instructions.
This is necessary for the next commit. The next commit would otherwise
cause an issue with the following constant operation:
i64 add (i64 ptrtoint (%runtime.machHeader* @_mh_execute_header to i64), i64 32)
Bug:
1. fn.locals[v.value] returns 0 (the default value) if v.value is not
part of the fn.locals map.
2. locals[fn.locals[v.value]] then returns the first local value, which
is usually non-nil
3. This incorrect value is then used as the operand value.
The manifestation of this convoluted bug was
https://github.com/tinygo-org/tinygo/issues/2842. It didn't occur more
often probably because it only seems to happen in practice with inline
assembly.
Fixes https://github.com/tinygo-org/tinygo/issues/2842
Switch over to LLVM 14 for static builds. Keep using LLVM 13 for regular
builds for now.
This uses a branch of the upstream Espressif branch to fix an issue,
see: https://github.com/espressif/llvm-project/pull/59
Previously, a type assertion on a nil interface would result in an out-of-bounds operand access, as we assumed it was a ptrtoint.
This would usually result in an undefined value which happens not to have the same name as the asserted type (and therefore the assertion fails as expected).
However, with an LLVM build with asserts, LLVM throws an assertion error:
```
interp.test: /home/niaow/go/src/github.com/tinygo-org/tinygo/llvm-project/llvm/include/llvm/IR/User.h:170: llvm::Value* llvm::User::getOperand(unsigned int) const: Assertion `i < NumUserOperands && "getOperand() out of range!"' failed.
```
This change handles a type code of 0 specially.
This removes the parentHandle argument from the internal calling convention.
It was formerly used to implment coroutines.
Now that coroutines have been removed, it is no longer necessary.
Instead of storing an increasing version number in relevant packages
(compiler.Version, interp.Version, cgo.Version, ...), read the build ID
from the currently running executable. This has several benefits:
* All changes relevant to the compiled packages are caught.
* No need to bump the version for each change to these packages.
This avoids merge conflicts.
* During development, `go install` is enough. No need to run
`tinygo clean` all the time.
Of course, the drawback is that it might be updated a bit more often
than necessary but I think the overall benefit is big.
Regular release users shouldn't see any difference. Because the tinygo
binary stays the same, the cache works well.
This change prevents interp from trying to execute goroutine starts or checks.
This fixes a bug where a goroutine started by an init function would run before the init function.
Dan Kegel
dkegel-fastly
Ayke van Laethem
Marco Manino
Kenneth Bell
Elliott Sales de Andrade
shivay
Damian Gryski
Nia Waldvogel