This is necessary for the following:
- to make sure os/exec can be imported
- to make sure internal/testenv can be imported
The internal/testenv package (which imports os/exec) is used by a lot of
tests. By adding support for it, more tests can be run.
This commit adds a bunch of new packages that now pass all tests.
The wrong path was used to cache binaryen, so it wasn't actually getting
cached. Therefore, wasm-opt was rebuilt on every new PR (slowing down
the "Build TinyGo release tarball" a lot).
The idea here is as follows:
- Run all Linux and cross compilation tests in the asser-test-linux
job.
- Only run native tests on MacOS and Windows.
This reduces testing time on MacOS and Windows, which are generally more
expensive in CI. Also, by not duplicating tests in Windows and MacOS we
can reduce overall CI usage a bit.
I've also changed the assert-test-linux job a bit to so that the tests
that are more likely to break and the tests that are only run in
assert-test-linux are run first.
internal/itoa wasn't around back in go 1.12 days when tinygo's syscall/errno.go was written.
It was only added as of go 1.17 ( https://github.com/golang/go/commit/061a6903a232cb868780b )
so we have to have an internal copy for now.
The internal copy should be deleted when tinygo drops support for go 1.16.
FWIW, the new version seems nicer.
It uses no allocations when converting 0,
and although the optimizer might make this moot, uses
a multiplication x 10 instead of a mod operation.
This change implements a new "scheduler" for WebAssembly using binaryen's asyncify transform.
This is more reliable than the current "coroutines" transform, and works with non-Go code in the call stack.
runtime (js/wasm): handle scheduler nesting
If WASM calls into JS which calls back into WASM, it is possible for the scheduler to nest.
The event from the callback must be handled immediately, so the task cannot simply be deferred to the outer scheduler.
This creates a minimal scheduler loop which is used to handle such nesting.
The implementation has been mostly copied from the Go reference
implementation with some small changes to fit TinyGo.
Source: 77a11c05d6/src/reflect/deepequal.go
In addition, this commit also contains the following:
- A set of tests copied from the Go reflect package.
- An increased stack size for the riscv-qemu and hifive1-qemu targets
(because they otherwise fail to run the tests). Because these
targets are only used for testing, this seems fine to me.
This commit adds support for musl-libc and uses it by default on Linux.
The main benefit of it is that binaries are always statically linked
instead of depending on the host libc, even when using CGo.
Advantages:
- The resulting binaries are always statically linked.
- No need for any tools on the host OS, like a compiler, linker, or
libc in a release build of TinyGo.
- This also simplifies cross compilation as no cross compiler is
needed (it's all built into the TinyGo release build).
Disadvantages:
- Binary size increases by 5-6 kilobytes if -no-debug is used. Binary
size increases by a much larger margin when debugging symbols are
included (the default behavior) because musl is built with debugging
symbols enabled.
- Musl does things a bit differently than glibc, and some CGo code
might rely on the glibc behavior.
- The first build takes a bit longer because musl needs to be built.
As an additional bonus, time is now obtained from the system in a way
that fixes the Y2038 problem because musl has been a bit more agressive
in switching to 64-bit time_t.
This is really just a preparatory commit for musl support. The idea is
to store not just the archive file (.a) but also an include directory.
This is optional for picolibc but required for musl, so the main purpose
of this commit is the refactor needed for this change.
This adds support for stdio in picolibc and fixes wasm_exec.js so that
it can also support C puts. With this, C stdout works on all supported
platforms.
This commit changes a target triple like "armv6m-none-eabi" to
"armv6m-unknown-unknow-eabi". The reason is that while the former is
correctly parsed in Clang (due to normalization), it wasn't parsed
correctly in LLVM meaning that the environment wasn't set to EABI.
This change normalizes all target triples and uses the EABI environment
(-eabi in the triple) for Cortex-M targets.
This change also drops the `--target=` flag in the target JSON files,
the flag is now added implicitly in `(*compileopts.Config).CFlags()`.
This removes some duplication in target JSON files.
Unfortunately, this change also increases code size for Cortex-M
targets. It looks like LLVM now emits calls like __aeabi_memmove instead
of memmove, which pull in slightly more code (they basically just call
the regular C functions) and the calls themself don't seem to be as
efficient as they could be. Perhaps this is a LLVM bug that will be
fixed in the future, as this is a very common occurrence.
This change adds support for the ESP32-C3, a new chip from Espressif. It
is a RISC-V core so porting was comparatively easy.
Most peripherals are shared with the (original) ESP32 chip, but with
subtle differences. Also, the SVD file I've used gives some
peripherals/registers a different name which makes sharing code harder.
Eventually, when an official SVD file for the ESP32 is released, I
expect that a lot of code can be shared between the two chips.
More information: https://www.espressif.com/en/products/socs/esp32-c3
TODO:
- stack scheduler
- interrupts
- most peripherals (SPI, I2C, PWM, etc)
This commit adds support for the following packages:
- crypto/md5
- crypto/sha1
- crypto/sha256
- crypto/sha512
They would normally need assembly implementations, but with these
aliases they already work everywhere.
This can be very useful for some purposes:
* It makes it possible to disable the UART in cases where it is not
needed or needs to be disabled to conserve power.
* It makes it possible to disable the serial output to reduce code
size, which may be important for some chips. Sometimes, a few kB can
be saved this way.
* It makes it possible to override the default, for example you might
want to use an actual UART to debug the USB-CDC implementation.
It also lowers the dependency on having machine.Serial defined, which is
often not defined when targeting a chip. Eventually, we might want to
make it possible to write `-target=nrf52` or `-target=atmega328p` for
example to target the chip itself with no board specific assumptions.
The defaults don't change. I checked this by running `make smoketest`
before and after and comparing the results.
This commit disables the Clang static analyzer and ARCMigrate components
of Clang. These aren't used at the moment in TinyGo so don't need to be
enabled. This reduces the build by 200 files (2909 -> 2709).
The idea comes from here (via LLVM weekly):
https://www.cambus.net/speedbuilding-llvm-clang-in-5-minutes/
Previously, the machine.UART0 object had two meanings:
- it was the first UART on the chip
- it was the default output for println
These two meanings conflict, and resulted in workarounds like:
- Defining UART0 to refer to the USB-CDC interface (atsamd21,
atsamd51, nrf52840), even though that clearly isn't an UART.
- Defining NRF_UART0 to avoid a conflict with UART0 (which was
redefined as a USB-CDC interface).
- Defining aliases like UART0 = UART1, which refer to the same
hardware peripheral (stm32).
This commit changes this to use a new machine.Serial object for the
default serial port. It might refer to the first or second UART
depending on the board, or even to the USB-CDC interface. Also, UART0
now really refers to the first UART on the chip, no longer to a USB-CDC
interface.
The changes in the runtime package are all just search+replace. The
changes in the machine package are a mixture of search+replace and
manual modifications.
This commit does not affect binary size, in fact it doesn't affect the
resulting binary at all.
This commit makes the output of `tinygo test` similar to that of `go
test`. It changes the following things in the process:
* Running multiple tests in a single command is now possible. They
aren't paralellized yet.
* Packages with no test files won't crash TinyGo, instead it logs it
in the same way the Go toolchain does.
Nia Waldvogel
Ayke van Laethem
Olivier Fauchon
Kenneth Bell
Dan Kegel
sago35
Damian Gryski
Yurii Soldak
Rajiv Kanchan
developer