tinygo

41 Tags

26 MiB

Tree: 5746154cc0

Author	SHA1	Message	Date
Ayke van Laethem	96e863f0f3	all: add a flag to the command line to select the serial implementation This can be very useful for some purposes: * It makes it possible to disable the UART in cases where it is not needed or needs to be disabled to conserve power. * It makes it possible to disable the serial output to reduce code size, which may be important for some chips. Sometimes, a few kB can be saved this way. * It makes it possible to override the default, for example you might want to use an actual UART to debug the USB-CDC implementation. It also lowers the dependency on having machine.Serial defined, which is often not defined when targeting a chip. Eventually, we might want to make it possible to write `-target=nrf52` or `-target=atmega328p` for example to target the chip itself with no board specific assumptions. The defaults don't change. I checked this by running `make smoketest` before and after and comparing the results.	3 years ago
deadprogram	ca8e1b075a	targets/maixbit: cleanup output from kflash command by removing ansi colors Signed-off-by: deadprogram <ron@hybridgroup.com>	4 years ago
Yannis Huber	d599959711	maixbit (uart): working on data tx When the data to send is too long the program gives an exception.	4 years ago
Yannis Huber	7814964693	maixbit: add board definition and dummy runtime	4 years ago
Yannis Huber	34e0961a79	Split RISC-V targets into 32/64-bit	5 years ago