- Use compiler-rt and picolibc instead of avr-libc.
- Use ld.lld instead of avr-ld (or avr-gcc).
This makes it much easier to get started with TinyGo on AVR because
installing these extra tools (gcc-avr, avr-libc) can be a hassle.
It also opens the door for future improvements such as ThinLTO.
There is a code size increase but I think it's worth it in the long run.
The code size increase can hopefully be reduced with improvements to the
LLVM AVR backend and to compiler-rt.
This matches the flash-command and is generally a bit easier to work
with.
This commit also prepares for allowing multiple formats to be used in
the emulator command, which is necessary for the esp32.
This is for consistency with Clang, which always adds a CPU flag even if
it's not specified in CFLAGS.
This commit also adds some tests to make sure the Clang target-cpu
matches the CPU property in the JSON files.
This does have an effect on the generated binaries. The effect is very
small though: on average just 0.2% increase in binary size, apparently
because Cortex-M3 and Cortex-M4 are compiled a bit differently. However,
when rebased on top of https://github.com/tinygo-org/tinygo/pull/2218
(minsize), the difference drops to -0.1% (a slight decrease on average).
This can be very useful for some purposes:
* It makes it possible to disable the UART in cases where it is not
needed or needs to be disabled to conserve power.
* It makes it possible to disable the serial output to reduce code
size, which may be important for some chips. Sometimes, a few kB can
be saved this way.
* It makes it possible to override the default, for example you might
want to use an actual UART to debug the USB-CDC implementation.
It also lowers the dependency on having machine.Serial defined, which is
often not defined when targeting a chip. Eventually, we might want to
make it possible to write `-target=nrf52` or `-target=atmega328p` for
example to target the chip itself with no board specific assumptions.
The defaults don't change. I checked this by running `make smoketest`
before and after and comparing the results.
It was `avr-atmel-none`, which is incorrect. It must be
`avr-unknown-unknown`.
Additionally, there is no reason to specify the target triple per chip,
it can be done for all AVR chips at once as it doesn't vary like
Cortex-M chips.
Somehow I forgot to add this emulator. With this, you can easily emulate
programs:
$ tinygo run -target=atmega1284p examples/serial
Loaded 698 .text at address 0x0
Loaded 12 .data
hello world!..
hello world!..
hello world!..
Not tested on actual hardware, only on simavr. The main motivation for
adding this chip is to be able to run simulated tests using a much
larger memory space (16kB RAM, 128kB flash) without jumping to the XMega
devices that may not be as well supported by LLVM.
Ayke van Laethem