I've discovered a bug in the implementation of the PHI instruction in
the interp package. This commit fixes the bug.
I've found this issue while investigating an issue with maps after
running interp per package.
At the moment, all targets use the Clang compiler to compile C and
assembly files. There is no good reason to make this configurable
anymore and in fact it will make future changes more complicated (and
thus more likely to have bugs). Therefore, I've removed support for
setting the compiler.
Note that the same is not true for the linker. While it makes sense to
standardize on the Clang compiler (because if Clang doesn't support a
target, TinyGo is unlikely to support it either), linkers will remain
configurable for the foreseeable future. One example is Xtensa, which is
supported by the Xtensa LLVM fork but doesn't have support in ld.lld
yet.
I've also fixed a bug in compileAndCacheCFile: it wasn't using the right
CFlags for caching purposes. This could lead to using stale caches. This
commit fixes that too.
This improves compatibility between the regular browser target
(-target=wasm) and the WASI target (-target=wasi). Specifically, it
allows running WASI tests like this:
tinygo test -target=wasi encoding/base32
This doesn't change the firmware, but it does make the disassembly of
the ELF files. Before:
Disassembly of section .text:
00000000 <(machine.UART).Write-0x100>:
0: 20001000 .word 0x20001000
4: 000009db .word 0x000009db
8: 00000f05 .word 0x00000f05
c: 00000f0b .word 0x00000f0b
10: 00000f05 .word 0x00000f05
After:
Disassembly of section .text:
00000000 <__isr_vector>:
0: 20001000 .word 0x20001000
4: 000009db .word 0x000009db
8: 00000f05 .word 0x00000f05
c: 00000f0b .word 0x00000f0b
10: 00000f05 .word 0x00000f05
The difference is that the disassembler will now use a proper symbol name
instead of using the closest by symbol (in this case, (machine.UART).Write).
This makes the disassembly easier to read.
This currently doesn't work with `tinygo flash` yet (even with
`-programmer=openocd`), you can use pyocd instead. For example, from the
Bluetooth package:
tinygo build -o test.hex -target=microbit-v2-s113v7 ./examples/advertisement/
pyocd flash --target=nrf52 test.hex
I intend to add support for pyocd to work around this issue, so that a simple
`tinygo flash` suffices.
There doesn't appear to be a user-controllable LED outside of the LED
matrix. In fact, the pin assigned for this was P13, which was connected
to the SPI SCK pin.
In this commit I've moved all core-specific flags to files for that
specific core. This is a bit of a cleanup (less duplicated JSON) but
should also help in the future when core-specific changes are made, such
as core specific build tags or when the FPU finally gets supported in
TinyGo.
Some notable specific changes:
- I've removed floating point flags from the Teensy 3.6 target. The
reason is that the FPU is not yet supported in TinyGo (in goroutine
stack switching for example) and floating point numbers would only
be supported by C files, not Go files (because the LLVM FPU feature
flags aren't used). This would create an ABI mismatch across CGo.
- I've added the "cpu":"cortex-m7" to the cortex-m7.json file to match
the configuration for the Teensy 4.0. This implies a change to the
nucleo-f722ze (because now it has its CPU field set). Somehow that
reduces the code size, so it looks like a good change.
I don't believe any of these changes should have any practical
consequences.
One issue I've found is in the Cortex-M33 target: it uses armv7m, which
is incorrect: it should be armv8m. But the chip is backwards compatible
so this should mostly work. Switching to armv8m led to a compilation
failure because PRIMASK isn't defined, this may be an actual bug.
The -Qunused-arguments flag disables the warning where some flags are
not relevant to a compilation. This commonly happens when compiling
assembly files (.s or .S files) because some flags are specific to C and
not relevant to assembly.
Because practically all baremetal targets need some form of assembly,
this flag is added to most CFlags. This creates a lot of noise. And it
is also added for compiling C code where it might hide bugs (by hiding
the fact a flag is actually unused).
This commit adds the flag to all assembly compilations and removes them
from all target JSON files.
See "STM32F40x and STM32F41x Errata sheet" - SPI CLK port must be 'fast' or 'very fast' to avoid data corruption on last bit (at the APB clocks we configure).
There is no good reason for func values to refer to interface type
codes. The only thing they need is a stable identifier for function
signatures, which is easily created as a new kind of globals. Decoupling
makes it easier to change interface related code.
This is basically just a golden test for the "switch" style of func
lowering. The next commit will make changes to this lowering, which will
be visible in the test output.
The LLVM CoroFrame pass appears to be tripping over this zero-sized
alloca. Therefore, do what the runtime would do: return a pointer to
runtime.zeroSizedAlloc. Or just don't deal with this case. But don't
emit a zero sized alloca to avoid this LLVM bug.
More information: https://bugs.llvm.org/show_bug.cgi?id=49916
The func-lowering pass has started to fail in the dev branch, probably
as a result of replacing the ConstPropagation pass with the IPSCCP pass.
This commit makes the code a bit more robust and should be able to
handle all possible cases (not just ptrtoint).
This commit implements replacing some global variables with a different
value, if the global variable has no initializer. For example, if you
have:
package main
var version string
you can replace the value with -ldflags="-X main.version=0.2".
Right now it only works for uninitialized globals. The Go tooling also
supports initialized globals (var version = "<undefined>") but that is a
bit hard to combine with how initialized globals are currently
implemented.
The current implementation still allows caching package IR files while
making sure the values don't end up in the build cache. This means
compiling a program multiple times with different values will use the
cached package each time, inserting the string value only late in the
build process.
Fixes#1045
Don't run the entire test suite for these options, as that would quickly
explode the testing time (making it less likely people actually run it).
Instead, run just one test for each configuration that should check for
most issues.
- Explicitly list all test cases. This makes it possible to store
tests in testdata/ that aren't tested on all platforms.
- Clean up filesystem and env test, by running them in a subtest and
deduplicating some code and removing the additionalArgs parameter.
Some errors were generated but never returned or never checked in the
test function. That's a problem. Therefore this commit fixes this
oversight (by me).
The constant propagation pass is removed in LLVM 12, so this pass needs
to be replaced anyway. The direct replacement would be the SCCP (sparse
conditional constant propagation) pass, but perhaps a better replacement
is the IPSCCP pass, which is an interprocedural version of the SCCP
pass and propagates constants across function calls if possible.
This is not always a code size reduction, but it appears to reduce code
size in a majority of cases. It certainly reduces code size in almost
all WebAssembly tests I did.
This should result in a small compile time reduction for incremental
builds, somewhere around 5-9%.
This commit, while small, required many previous commits to not regress
binary size. Right now binary size is basically identical with very few
changes in size (the only baremetal program that changed in size did so
with a 4 byte increase).
This commit is one extra step towards doing as much work as possible in
the parallel and cached package build step, out of the serial LTO phase.
Later improvements in this area have this change as a prerequisite.
A switch statement is not normally emitted by the compiler package, but
LLVM function passes may convert a series of if/else pairs to a switch
statement. A future change will run function passes in the package
compile phase, so the interp package (which is also run after all
modules are merged together) will need to deal with these new switch
statements.
This commit optimizes string literals and globals by setting the
appropriate alignment and using a nil pointer in zero-length strings.
- Setting the alignment for string values has a surprisingly large
effect, up to around 2% in binary size. I suspect that LLVM will
pick some default alignment for larger byte arrays if no alignment
has been specified and forcing an alignment of 1 will pack all
strings closer together.
- Using nil for zero-length strings also has a positive effect, but
I'm not sure why. Perhaps it makes some optimizations more trivial.
- Always setting the alignment on globals improves code size slightly,
probably for the same reasons setting the alignment of string
literals improves code size. The effect is much smaller, however.
This commit might have an effect on performance, but if it does this
should be tested separately and such a large win in binary size should
definitely not be ignored for small embedded systems.
Sometimes, LLVM may rename named structs when merging modules.
Therefore, we can't rely on typecodeID structs to retain their struct
names.
This commit changes the interface lowering pass to not rely on these
names. The interp package does however still rely on this name, but I
hope to fix that in the future.
This simplifies future changes. While the move itself is very simple, it
required some other changes to a few transforms that create new
functions to add the optsize attribute manually. It also required
abstracting away the optimization level flags (based on the -opt flag)
so that it can easily be retrieved from the config object.
This commit does not impact binary size on baremetal and WebAssembly.
I've seen a few tests on linux/amd64 grow slightly in size, but I'm not
too worried about those.
Instead of the regular build, it's the `make test` line that fails due
to OOM. This is because testing means that a lot of test binaries need
to be built while the regular build only needs to link one binary.
This improves https://github.com/tinygo-org/tinygo/pull/1774 and should
hopefully actually fix the OOM errors.
This commit refactors PWM support in the machine package to be more
flexible. The new API can be used to produce tones at a specific
frequency and control servos in a portable way, by abstracting over
counter widths and prescalers.
This job is causing OOM errors on CircleCI so limit it to just two jobs
(which should be fine on a 2CPU executor). Hopefully this fixes the
errors in CI that have occured recently.
This patch adds support for passing CFLAGS added in #cgo lines of the
CGo preprocessing phase to the compiler when compiling C files inside
packages. This is expected and convenient but didn't work before.
This probably won't speed up the build on multicore systems (the build
is still dominated by the whole-program optimization step) but should be
useful at a later date for other optimizations. For example, I intend to
eventually optimize each package individually including C files, which
should enable cross-language optimizations (inlining C functions into Go
functions, for example). For that to work, accurate dependency tracking
is important.
Add a 'result' member to the compileJob struct which is used by the link
job to get all the paths that should be linked together. This is not yet
necessary (the paths are fixed), but soon the paths are only known after
a linker dependency has run.
In rare cases the signature might change as a result of LLVM renaming
some named struct types when multiple LLVM modules are merged. The
easiest workaround is to detect such mismatched signatures and adding a
bitcast: this should be safe as the underlying data is effectively of
the same type.
This results in a significant speedup in some cases. For example, this
runs over twice as fast with a warm cache:
tinygo build -o test.elf ./testdata/stdlib.go
This should help a lot with edit-compile-test cycles, that typically
only modify a single package.
This required some changes to the interp package to deal with globals
created in a previous run of the interp package and to deal with
external globals (that can't be loaded from or stored to).
This commit replaces a number of panics with returning an error value as
a result of changing the toLLVMValue method signature. This should make
it easier to diagnose issues.
Ayke van Laethem
sago35
Dan Kegel
developer
Tobias Theel
Agurato
Kenneth Bell
deadprogram