This is needed to make it available to more packages, for caching
purposes.
For caching, the version itself may not be enough during development.
But for regular releases, the version provides some protection against
accidentally using a cache entry that is invalid in a newer version.
This makes it possible to use Bluetooth on the BBC micro:bit.
Note that you need to use -programmer=cmsis-dap otherwise the SoftDevice
will be erased while flashing something that uses Bluetooth.
This commit changes pin numbering for atmega328 based boards (Uno, Nano)
to use the standard format, where pin number is determined by the
pin/port. Previously, pin numbers were based on what the Uno uses, which
does not seem to have a clear pattern.
One difference is that counting starts at port B, as there is no port A.
So PB0 is 0, PB1 is 1… PC0 is 8.
This commit also moves PWM code to the atmega328 file, as it may not be
generic to all ATmega chips.
Unfortunately, `tinygo flash` doesn't work here. You have to merge the
SoftDevice and the application hex with a mergehex tool and flash that
to the board.
This commit also adds a bit of version independence, in particular for
external commands. It also adds the LLVM version to the `tinygo version`
command, which might help while debugging.
This is necessary for better CGo support on bare metal. Existing
libraries expect to be able to include parts of libc and expect to be
able to link to those symbols.
Because with this all targets have a working libc, it is now possible to
add tests to check that a libc in fact works basically.
Not all parts of picolibc are included, such as the math or stdio parts.
These should be added later, when needed.
This commit also avoids the need for the custom memcpy/memset/memcmp
symbols that are sometimes emitted by LLVM. The C library will take care
of that.
This adds support for the `-scheduler=tasks` flag for AVR. On most AVR
chips you wouldn't want to run a real scheduler but it may be useful in
some cases, especially on devices with more RAM. It is disabled by
default.
This allows setting a different directory for experimental changes. For
example, I also have a llvm-project.master directory that tracks the
master branch. It is very useful to be able to temporarily use that
directory:
make llvm-build.master LLVM_BUILDDIR=llvm-build.master LLVM_PROJECT=llvm-project.master
Not tested on actual hardware, only on simavr. The main motivation for
adding this chip is to be able to run simulated tests using a much
larger memory space (16kB RAM, 128kB flash) without jumping to the XMega
devices that may not be as well supported by LLVM.
This makes the `make wasi-libc` command much more reliable and makes the
CI configuration simpler. Also, it avoids warnings when they are not
relevant.
This commit adds support for software vectoring in the PLIC interrupt.
The interrupt table is created by the compiler, which leads to very
compact code while retaining the flexibility that the interrupt API
provides.
This might sound crazy, but I think it's better to enable the GC by
default to avoid surprises. It costs 1130 bytes of flash and 16 bytes of
RAM (plus heap overhead) so it's not exactly free, but if needed it can
easily be disabled with `-gc=leaking`. On the Uno (32kB flash, 2kB RAM)
that's not massive, on the DigiSpark (8kB flash, 0.5kB RAM) that may be
too much depending on the application.
This allows CGo code to call some libc functions. Additionally, by
putting memset/memmove/memcpy in an archive they're not included anymore
when not necessary, reducing code size for small programs.
Add a target for the Adafruit Circuit Playground Bluefruit, which is
based on the nRF52840. Adds the necessary code for the machine
package and the json and linker script files in the targets directory.
The machine package code is based on board_circuitplay_express.go,
with modifications made by consulting the wiring diagram on the
adafruit website here:
https://learn.adafruit.com/adafruit-circuit-playground-bluefruit/downloads
Also adds support to the uf2 conversion packacge to set the familyID
field. The Circuit Playground Bluefruit firmware rejects uf2 files
without the family id set to 0xADA52840 (and without the flag specifying
that the family id is present).
This should make it more maintainable. Another big advantage that
generation time (including gofmt) is now 3 times faster. No real attempt
at refactoring has been made, that will need to be done at a later time.
Now that we use LLVM 9, RISC-V support in LLVM has far fewer bugs and we
can avoid the GNU toolchain.
* replace GNU linker with lld
* replace GCC with clang
Additionally, RISC-V was promoted to stable so it can be enabled by
default in CI.
This brings a big speedup. Not counting gofmt time,
`make gen-device-avr` became about 3x faster. In the future, it might be
an idea to generate the AST in-memory and write it out already
formatted.
The default Go version is 1.12. Because Go 1.13 introduced language
changes (improved numeric constants), TinyGo compiled with Go 1.12
cannot handle Go 1.13 code such as the Go 1.13 standard library.
Use Go 1.13 to build TinyGo on Azure Pipelines to fix this.
We don't need the separate submodule: compiler-rt is already included in
the llvm-project repository.
This should hopefully make CI slightly faster too.
This is a large commit that moves all code directly related to
compiling/linking into a new builder package. This has a number of
advantages:
* It cleanly separates the API between the command line and the full
compilation (with a very small API surface).
* When the compiler finally compiles one package at a time (instead of
everything at once as it does now), something will have to invoke it
once per package. This builder package will be the natural place to
do that, and also be the place where the whole process can be
parallelized.
* It allows the TinyGo compiler to be used as a package. A client can
simply import the builder package and compile code using it.
As part of this refactor, the following additional things changed:
* Exported symbols have been made unexported when they weren't needed.
* The compilation target has been moved into the compileopts.Options
struct. This is done because the target really is just another
compiler option, and the API is simplified by moving it in there.
* The moveFile function has been duplicated. It does not really belong
in the builder API but is used both by the builder and the command
line. Moving it into a separate package didn't seem useful either
for what is essentially an utility function.
* Some doc strings have been improved.
Some future changes/refactors I'd like to make after this commit:
* Clean up the API between the builder and the compiler package.
* Perhaps move the test files (in testdata/) into the builder package.
* Perhaps move the loader package into the builder package.
This smartwatch doesn't have an on-board debugger, so I picked the one I
was using while getting this smartwatch to run Go programs (the J-Link
EDU Mini).
Hiroki Noda
deadprogram
sago35
APDevice
Ayke van Laethem
Brad Peabody
Wojtek Siudzinski
Jaden Weiss
BCG
Michael Matloob
Dmitri Goutnik
Daniel Esteban
Nikolas Sepos