github/tinygo - tinygo - Gitea: Git with home nas server

Author	SHA1	Message	Date
sago35	b00cfc001e	targets: add serial and serial-port key to JSON files for adafruit boards	3 years ago
Ayke van Laethem	96e863f0f3	all: add a flag to the command line to select the serial implementation This can be very useful for some purposes: * It makes it possible to disable the UART in cases where it is not needed or needs to be disabled to conserve power. * It makes it possible to disable the serial output to reduce code size, which may be important for some chips. Sometimes, a few kB can be saved this way. * It makes it possible to override the default, for example you might want to use an actual UART to debug the USB-CDC implementation. It also lowers the dependency on having machine.Serial defined, which is often not defined when targeting a chip. Eventually, we might want to make it possible to write `-target=nrf52` or `-target=atmega328p` for example to target the chip itself with no board specific assumptions. The defaults don't change. I checked this by running `make smoketest` before and after and comparing the results.	3 years ago
Ayke van Laethem	098fb5f39c	nrf52840: add build tags for SoftDevice support The SoftDevice should already be installed on these chips. Adding the right build tags makes them work with the bluetooth package. I did not change the HasLowFrequencyCrystal property: all these boards use the MDBT50Q which appears to include a low-frequency oscillator. That is, I tested the ItsyBitsy nRF52840 with the property set to true and advertisement worked just fine.	4 years ago
BCG	ad6adfd8ff	Added board definition for Feather nRF52840 Express	4 years ago
BCG	0655086048	machine/nrf: implement auto-reset over USB for nrf52840	5 years ago
BCG	c721cae48b	machine: add Adafruit CLUE Alpha	5 years ago
Michael Matloob	1cb9b948bc	targets: add target circuitplay-bluefruit Add a target for the Adafruit Circuit Playground Bluefruit, which is based on the nRF52840. Adds the necessary code for the machine package and the json and linker script files in the targets directory. The machine package code is based on board_circuitplay_express.go, with modifications made by consulting the wiring diagram on the adafruit website here: https://learn.adafruit.com/adafruit-circuit-playground-bluefruit/downloads Also adds support to the uf2 conversion packacge to set the familyID field. The Circuit Playground Bluefruit firmware rejects uf2 files without the family id set to 0xADA52840 (and without the flag specifying that the family id is present).	5 years ago