tinygo

Commit Graph

Author	SHA1	Message	Date
Kobayashi Shunta	841abb0903	feat: add node: specifier	3 months ago
Damian Gryski	9cb263479c	wasi preview 2 support (#4027 ) * all: wasip2 support Co-authored-by: Randy Reddig <randy.reddig@fastly.com>	4 months ago
deadprogram	880e940417	targets: add cyw43439 tag to badger2040-w and also add new pico-w target for wireless support Signed-off-by: deadprogram <ron@hybridgroup.com>	5 months ago
Ayke van Laethem	81ce7fb738	LLVM 18 support	6 months ago
deadprogram	ee3a05f1de	targets: add support for Badger2040 W Signed-off-by: deadprogram <ron@hybridgroup.com>	6 months ago
Johann Freymuth	1d9f26cee1	targets: add support for m5paper	6 months ago
Elias Naur	2b3b870bfe	mksnanov3: limit programming speed to 1800 kHz Both of my development boards exhibit stability problems when programming at the default 4000 kHz speed of the target/stmf32d4x OpenOCD configuration. Note that the speed limit must be set by an event handler, because it is hard-coded by a similar event handler in stmf32f4x.cfg: $_TARGETNAME configure -event reset-init { # Configure PLL to boost clock to HSI x 4 (64 MHz) ... # Boost JTAG frequency adapter speed 8000 <-- resolves to 4000 kHz by the SWD interface } While here, replace the reference to the deprecated "stlink-v2" configuration.	8 months ago
Patrick Ting	22bf045c9a	add stm32 nucleol476rg support	7 months ago
Randy Reddig	cfcc894855	targets: add wasi.json that inherits wasip1.json PR feedback	8 months ago
Randy Reddig	8e8ad9004f	all: replace target=wasi with target=wasip1 This eliminates the 'wasi' build tag in favor of 'GOOS=wasip1', introduced in Go 1.21. For backwards compatablity, -target=wasi is a synonym for -target=wasip1.	8 months ago
Patrick Lindsay	b6fdbee14e	Begin implementing support for Adafruit ESP32 Feather V2	8 months ago
Ayke van Laethem	7c546525ea	wasm-unknown: add math and memory builtins that LLVM needs This new library is needed for wasm targets that aren't WASI and don't need/want a libc, but still need some intrinsics that are generated by LLVM.	8 months ago
Jonathan Böcker	a7ddb33bea	Add pca10059-s140v7 as a target	8 months ago
deadprogram	c66836cf3a	targets: add support for Thumby Signed-off-by: deadprogram <ron@hybridgroup.com>	9 months ago
deadprogram	ad30085b93	targets/wasm_unknown: use proper defaults for GC Signed-off-by: deadprogram <ron@hybridgroup.com>	9 months ago
deadprogram	5879d785a9	target/wasm_unknown: remove bulk memory and use imported memory for extreme tinyness Signed-off-by: deadprogram <ron@hybridgroup.com>	9 months ago
deadprogram	186018abeb	runtime, targets: some WIP on wasm unknown in part from PR #3072 Signed-off-by: deadprogram <ron@hybridgroup.com>	9 months ago
BCG	828b9614c2	nrf52840: generic board support (#4121 ) machine/nrf52840: generic board support	9 months ago
=	cc3e785692	Remove unused value	10 months ago
Ayke van Laethem	70f1a5429a	esp32c3: update linker script to support binary blobs To be able to link with the binary blobs that provide wifi and BLE, the linker script needs a few tweaks.	9 months ago
Ayke van Laethem	2fb2113168	esp32c3: add more ROM functions These functions are used by the binary blobs that implement wifi/BLE on the ESP32-C3. While this is a lot of lines of linker script, I think it's a good idea to add them here (instead of in a separate library) because they're part of the ESP32-C3 hardware.	9 months ago
Elias Naur	bb66232164	targets: add support for the MKS Robin Nano V3.x Signed-off-by: Elias Naur <mail@eliasnaur.com>	10 months ago
deadprogram	8858d49989	targets: add ninafw tag to Arduino mkrwifi1010 and Adafruit Matrix Portal M4 for drivers netlink support Signed-off-by: deadprogram <ron@hybridgroup.com>	10 months ago
deadprogram	cf39d8b2c8	targets: add ninafw pins and settings to Adafruit PyBadge board with AirLift Featherwing Signed-off-by: deadprogram <ron@hybridgroup.com>	10 months ago
deadprogram	d92a31b440	targets: add ninafw pins and settings to Adafruit Metro M4 Airlift board Signed-off-by: deadprogram <ron@hybridgroup.com>	10 months ago
BCG	a40b11f535	Adding additional build tag for boards with ninafw	10 months ago
deadprogram	8c90f4facf	machine/pyportal: add needed values to board file for ninafw BLE support Signed-off-by: deadprogram <ron@hybridgroup.com>	10 months ago
Ayke van Laethem	6984af43a0	all: statically link to LLVM 17 instead of LLVM 16 We can now finally do it, now that Espressif has updated their fork.	1 year ago
deadprogram	81c56c3ab8	machine, targets: ninafw support for arduino-nano33 and nano-rp2040 boards Signed-off-by: deadprogram <ron@hybridgroup.com>	10 months ago
deadprogram	c2083014b3	targets: add ninafw tag to nano-rp2040 for ninafw BLE support Signed-off-by: deadprogram <ron@hybridgroup.com>	10 months ago
Yurii Soldak	6420e90124	machine/atmega328pb: refactor to enable extra uart	11 months ago
sago35	4df145dcb4	m5stamp-c3: change settings to explicitly use UART	11 months ago
deadprogram	e065da20cb	targets: add Adafruit qtpy-esp32c3 board support Signed-off-by: deadprogram <ron@hybridgroup.com>	12 months ago
deadprogram	d7c77b6761	machine/esp32c3: implement USB_SERIAL for USBCDC communication Signed-off-by: deadprogram <ron@hybridgroup.com>	12 months ago
Scott Feldman	d4189feca6	Bump default stack size for target pico to 8kb from 2kb	1 year ago
Randy Reddig	174d492355	compileopts, targets, main: support Wasmtime v14 (#3972 ) compileopts, targets, main: support Wasmtime v14	1 year ago
deadprogram	88b29589d6	targets: increase default stack size to 64k for wasi/wasm targets Signed-off-by: deadprogram <ron@hybridgroup.com>	1 year ago
Ayke van Laethem	1da1abe314	all: remove LLVM 14 support This is a big change: apart from removing LLVM 14 it also removes typed pointer support (which was only fully supported in LLVM up to version 14). This removes about 200 lines of code, but more importantly removes a ton of special cases for LLVM 14.	1 year ago
Ayke van Laethem	1d7543e2bf	all: switch to LLVM 16 This commit adds support for LLVM 16 and switches to it by default. That means three LLVM versions are supported at the same time: LLVM 14, 15, and 16. This commit includes work by QuLogic: * Part of this work was based on a PR by QuLogic: https://github.com/tinygo-org/tinygo/pull/3649 But I also had parts of this already implemented in an old branch I already made for LLVM 16. * QuLogic also provided a CGo fix here, which is also incorporated in this commit: https://github.com/tinygo-org/tinygo/pull/3869 The difference with the original PR by QuLogic is that this commit is more complete: * It switches to LLVM 16 by default. * It updates some things to also make it work with a self-built LLVM. * It fixes the CGo bug in a slightly different way, and also fixes another one not included in the original PR. * It does not keep compiler tests passing on older LLVM versions. I have found this to be quite burdensome and therefore don't generally do this - the smoke tests should hopefully catch most regressions.	2 years ago
deadprogram	ff32fbbb4f	targets: increase default stack size to 32k for wasi/wasm targets Signed-off-by: deadprogram <ron@hybridgroup.com>	1 year ago
Timothy Rule	75aca0f5ee	Board support for Adafruit Gemma M0 (#3903 ) machine, targets: Board support for Adafruit Gemma M0	1 year ago
deadprogram	43d282174f	targets: add GoBadge target as alias for PyBadge :) Signed-off-by: deadprogram <ron@hybridgroup.com>	1 year ago
Pierre Constantineau	3e2471d934	adding new uf2 target for PCA10056 (#3765 ) targets: adding new uf2 target for PCA10056	1 year ago
sago35	67ec722a74	board: add AKIZUKI DENSHI AE-RP2040	1 year ago
Ayke van Laethem	a93f0ed12a	all: Go 1.21 support	1 year ago
Charlie Haley	5f2e72f371	compiler: add compiler-rt to wasm.json	1 year ago
Charlie Haley	5b581d83b3	compiler: add compiler-rt and wasm symbols to table	1 year ago
Mansour Behabadi	db8d80755f	rp2040: add missing suffix to CMD_READ_STATUS	1 year ago
Ayke van Laethem	4d2a6d2bbe	wasm: remove i64 workaround, use BigInt instead Browsers previously didn't support the WebAssembly i64 type, so we had to work around that limitation by converting the LLVM i64 type to something else. Some people used a pair of i32 values, but we used a pointer to a stack allocated i64. Now however, all major browsers and Node.js do support WebAssembly BigInt integration so that i64 values can be passed back and forth between WebAssembly and JavaScript easily. Therefore, I think the time has come to drop support for this workaround. For more information: https://v8.dev/features/wasm-bigint (note that TinyGo has used a slightly different way of passing i64 values between JS and Wasm). For information on browser support: https://webassembly.org/roadmap/	2 years ago
ivoszz	b7508818ee	Support for the M5STACK M5StickC ESP32-PICO device	1 year ago

1 2 3 4 5 ...

465 Commits (db2a06a9bb4a16850511294b7418fca6422e668b)